ZB 4K GG HENSEL

Clamping yoke (bus-bar), Clamping yoke, silver, 4 mm², Width: 6 mm, Steel  

1824560000  

ZB 4K GG HENSEL  

4032248330973  

50  items

20,4  mm

0,803  inch

19  mm

0,748  inch

6  mm

0,236  inch

3,8  g

-5 °C…40 °C  

Compliant without exemption  

No SVHC above 0.1 wt%  

Steel  

PA  

silver  

Installation instructions:
The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.

When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.

Regarding accessory use, the manufacturer's instructions must be followed.

List of restrictions:
The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.  

for busbar 10 x 3 mm  

Feed-through (bushing)  

when screwed in  

6  mm²

0,5  mm²

1  Nm

0,5  Nm

Clamping yoke  

Feed-through (bushing)  

4  mm²

EC002848  

EC002848  

EC002848  

EC002848  

EC002848  

27-14-11-92  

27-14-11-92  

27-14-11-92  

27-14-11-46  

27-14-11-46  

27-25-01-16  

27-25-01-16  

27-25-01-16  

Conform