ACT20M-FRQ-AO-X-S
Product image
ACT20M-FRQ-AO-X-S
Connection diagram
ACT20M-FRQ-AO-X-S
Dimensional drawing
ACT20M-FRQ-AO-X-S

ACT20M-FRQ-AO-X-S

Frequency signal converter, exclusive of rail bus supply, Input : Frequency, Output : 0(4)-20 mA, 0(2)-10 V

Tuotteen tunnus 2825130000
Avaa konfiguraattorissa
Lataa tietosivu Tekninen tuki Ohjelmistotuki Tuotelataukset
Lisävarusteet 2 Samankaltaiset tuotteet 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Entrée 출력 Obecné údaje Insulation coordination Connection data EMV-Konformität und Zulassungen Part description Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Frequency signal converter, exclusive of rail bus supply, Input : Frequency, Output : 0(4)-20 mA, 0(2)-10 V 
Order No.
2825130000 
Type
ACT20M-FRQ-AO-X-S 
GTIN (EAN)
4064675360940 
Qty.
1 items

Dimensions and weights

Depth
114,3 mm
Depth (inches)
4,5 inch
Height
112,5 mm
Height (inches)
4,429 inch
Width
6,1 mm
Width (inches)
0,24 inch
Net weight
70 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-25 °C...70 °C 
Humidity
0...95 % (no condensation) 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Entrée

Input frequency
0…100kHz 
állítható 
Number inputs
1 
Sensor
NAMUR sensor, according to EN60947-5-6 
NPN / PNP transistor (trig-level low: ≤4 V high: ≥7 V ) 
TTL (trig-level low: ≤0.8 V high: ≥2.0 V) 
Tacho (trig-level low: ≤-50 mV high: ≥+50 mV) 
Special current (trig-level: user-defined) 
Special voltage (trig-level: user-defined) 
S0 (trig-level low: ≤2.2 mA high: ≥9.0 mA ) 
Sensor supply
5…17 V 

출력

Load impedance current
≤ 600 Ω 
load impedance voltage
≥ 10 kΩ 
Number of outputs
1 
Output behaviour on failure downscale
3,5 mA
Output behaviour on failure upscale
23 mA
Output current
0...20 mA 
4...20 mA 
in case of sensor error 
downscale (3,5 mA) 
upscale (23 mA) 
Output signal limit
<28 mA 
Output voltage, note
0(2)...10 V 
0(1)...5 V 
0(0,2)…1 V 
Type
active 
connected control must be passive 

Obecné údaje

Accuracy
Basic accuracy: 0.0002 Hz 
Jmenovitá spotřeba energie
0,5 VA
Konfigurace
DIP 스위치 
FDT/DTM 소프트웨어를 사용하여 
Napájecí napětí
24 В пост. тока ± 30 % 
Nosná lišta
TS 35 
Provozní nadmořská výška
≤ 2000 m 
Spotřeba elektrické energie, max.
1,2 W
Spotřeba elektrické energie, typ.
0,65 W
Stupeň krytí
IP20 
Teplotní součinitel
≤0,01% of measurement range⁄°C 
Čas odezvy
≤ 30 ms 
(0…90% / 100…10% of input level) 

Insulation coordination

EMC standards
IEC 61326-1 
Galvanic isolation
Separador de 3 vías 
Insulation voltage
2,5 kVeff /1 min. 
Pollution severity
2 
Rated voltage
300 Veff 
300 V 
Surge voltage category
II 

Connection data

Type of connection
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

EMV-Konformität und Zulassungen

EMC standards
IEC 61326-1 

Part description

Popis produktu
The universal frequency measuring transducer, which can be configured via software, disconnects and converts input signals (frequency, Namur, NPN, PNP, speedometer, TTL and S0) into an active analogue standard output signal. The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring. The model ACT20M-FRQ-AO-S can be supplied via the Weidmüller DIN rail bus 

Classifications

ETIM 8.0
EC002918 
ETIM 9.0
EC002918 
ETIM 10.0
EC002918 
ECLASS 14.0
27-21-01-28 
ECLASS 15.0
27-21-01-28