RCMKITP-I 24VAC 2CO LD
Product image
Similar to illustration
RCMKITP-I 24VAC 2CO LD
Wiring diagram
RCMKITP-I 24VAC 2CO LD
Graph
DC load limit curve
Resistive load
RCMKITP-I 24VAC 2CO LD
Graph
Derating curve
Relay in combination with base
RCMKITP-I 24VAC 2CO LD
Graph
AC operational voltage range
RCMKITP-I 24VAC 2CO LD
Graph
Electrical service life
250 V AC resistive load
RCMKITP-I 24VAC 2CO LD
Dimensional drawing
RCMKITP-I 24VAC 2CO LD
Miscellaneous
RCMKITP-I 24VAC 2CO LD
Miscellaneous
RCMKITP-I 24VAC 2CO LD
Miscellaneous
RCMKITP-I 24VAC 2CO LD

RCMKITP-I 24VAC 2CO LD

Dette produkt er snart ikke længere tilgængeligt.

Available until: 31.12.2025

RIDERSERIES RCM, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 24 V AC, Continuous current: 12 A, PUSH IN, Test button available: Yes

Produkt ID 8921090000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 20 Enkeltdele 4 Anvendte produkter 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
RIDERSERIES RCM, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 24 V AC, Continuous current: 12 A, PUSH IN, Test button available: Yes 
Order No.
8921090000 
Typ
RCMKITP-I 24VAC 2CO LD 
GTIN (EAN)
4032248701964 
Qty.
10 Styk
Delivery status
This article will no longer be available in the future. 
Available until
31.12.2025 

Dimensions and weights

Depth
78,3 mm
Depth (inches)
3,083 inch
Height
98 mm
Height (inches)
3,858 inch
Width
28 mm
Width (inches)
1,102 inch
Peso neto
98,8 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…70 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
24 V AC 
Rated current AC
55 mA 
Power rating
1.32 VA 
Coil resistance
192 Ω ± 10 % 
Status indicator
red LED 

Load side

Rated switching voltage
240 V AC 
Continuous current
12 A 
Макс. частота коммутации при номинальной нагрузке
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
1 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
24 A / 20 ms 
AC switching capacity (resistive), max.
3000 VA 
DC switching capacity (resistive), max.
288 W @ 24 V 
Retardo de conexión
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
2 CO contact (AgNi) 
Mechanical service life
AC coil 20 x 106 switching cycles 
DC coil 30 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
Yes 
Colour
black 

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
절연재 그룹
IIIa 
Clearance and creepage distances for control side - load side
≥ 4 mm 
Dielectric strength for control side - load side
2.5 kVeff / 1 Min. 
Spannungsfestigkeit benachbarte Kontakte
2.5 kVeff / 1 Min. 
Dielectric strength of open contact
1.2 kVeff /1 min. 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (CSA) relay
249409-2426937 
N° certificato (CSA) base
249409-2295474 
Certificate No. (DNV)
TAA000011A 
Certificate no. (cURus) relay
E522350 
Certificate no. (cURus) base
E223759 

Connection data

Wire connection method
PUSH IN 
Avisoleringslängd nominellt
12 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,75 mm²
1,5 mm²
Wire cross-section, solid, min.
0,75 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, max. (AWG)
AWG 16 
Wire connection cross section, finely stranded, min.
0,75 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire cross-section, finely stranded, max. (AWG)
AWG 16 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01