VPU AC II+III 0 L/N-PE 440/20 S
VPU AC II+III 0 L/N-PE 440/20 S
Electric symbol
Schematic circuit diagram

VPU AC II+III 0 L/N-PE 440/20 S

Surge voltage arrester, Low voltage, Spare arrester, TN-S, TT

Product ID 2908550000
Gegevensblad downloaden Productdownloads
Toebehoren 1 Is accessoire van 4 Verwante producten 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert Allmänna data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Verze
Surge voltage arrester, Low voltage, Spare arrester, TN-S, TT 
Order No.
2908550000 
Typ
VPU AC II+III 0 L/N-PE 440/20 S 
GTIN (EAN)
4099986190979 
Qty.
1 items

Dimensions and weights

Hloubka
54 mm
Depth (inches)
2,126 inch
Height
45,3 mm
Height (inches)
1,783 inch
Šířka
18 mm
Width (inches)
0,709 inch
Net weight
75,5 g

Temperatures

Ambient temperature
-40 °C…85 °C 
Betriebstemperatur
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS-Konformitätsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 

Allmänna data

Colour
grey 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
Spare arrester 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Combined pulse UOC
6 kV
Discharge current In (8/20µs) wire-PE
10 kA 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
No Fuse neccessary ≤100 A gG 
Integrated back-up fuse
No 
Low voltage network
TN-S 
TT 
Max. continuous voltage, Uc (AC)
440 V 
Number of poles
1 
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T2 
T3 
Response time / fallback time
≤ 25 ns 
Signalling contact
No 
Standards
IEC 61643-11 
EN 61643-11 
Stupeň krytí Up při IN (L/N-PE)
≤ 1.7 kV 
≤ 1.4 kV 
Temporary surge voltage (over-voltage) - TOV
440 V
Voltage type
AC 
Vybíjecí proud (typ III)
3 kA
Vybíjecí proud Imax. (8/20 µs) vodič-PE
20 kA 
Zatížitelnost zkratovým proudem ISCCR
25 kA
Protection level Up at IN (L-PE) (type III)
≤1 kV 

Connection data

Conductor connection cross-section PE, solid, max.
35 mm²
Conductor connection cross-section PE, stranded, max.
35 mm²
Stripping length
13 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
15 mm
Wire cross-section, solid, min.
2,5 mm²
Wire cross-section, solid, max.
10 mm²
Wire connection cross section, finely stranded, min.
2,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
2,5 mm²
Connection cross-section, stranded, max.
10 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
1 
Protection degree
IP20 in installed state 
Colour
grey 

Guarantee

Time interval
5 years 

Important note

Produkthinweis
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02