ACT20P-CMT-10-AO-RC-S
Product image
ACT20P-CMT-10-AO-RC-S
ACT20P-CMT-10-AO-RC-S
Dimensioned drawing
ACT20P-CMT-10-AO-RC-S
ACT20P-CMT-10-AO-RC-S
ACT20P-CMT-10-AO-RC-S
ACT20P-CMT-10-AO-RC-S

ACT20P-CMT-10-AO-RC-S

Current-measuring transducer, Limit value monitoring, Input : 0…5/10 A, Analogue output, Relay output, Current-carrying cable in feed-through hole

Tuotteen tunnus 1510470000
Lataa tietosivu Engineering Support Software Support Product Downloads
Lisävarusteet 2 Yksittäiset osat 1 Samankaltaiset tuotteet 11
General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output Output (digital) Output (analogue) General data Insulation coordination Connection data Important note Classifications Approvals

General ordering data

Version
Current-measuring transducer, Limit value monitoring, Input : 0…5/10 A, Analogue output, Relay output, Current-carrying cable in feed-through hole  
Order No.
1510470000  
Type
ACT20P-CMT-10-AO-RC-S  
GTIN (EAN)
4050118319583  
Qty.
1  items

Dimensions and weights

Depth
113,6  mm
Depth (inches)
4,472  inch
Height
119,2  mm
Height (inches)
4,693  inch
Width
22,5  mm
Width (inches)
0,886  inch
Net weight
211  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...60 °C  
Humidity
5...95 %, no condensation  

Probability of failure

MTTF
130  a

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
6c, 7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924  

Input

Input frequency
AC: 15…700 Hz (true root mean square)  
Input measurement range
configurable  
0…5/10 A AC (RMS) or DC  
max. peak current 10 × IInput (1 s)  
max. peak current 2 × IInput (1 s) @ 5/10 A DC  
For DC current measurement (AA): Current direction display at the output (-/+ analog value)  
max. peak current 2 × IInput (1 s)  
Input signal
Current-carrying cable in feed-through hole  
Number of inputs
1  
Overload behaviour
Max. peak current: 10 × IInput for 1s  

Output

Type
active  
connected control must be passive  

Output (digital)

Alarm function
Surge current  
Under-current  
Alarm limit setting: 2 - 105 %  
Hysteresis 5% / 10%  
Alarm delay: 0…10 s  
Continuous current
2 × I Input  
Max. switching voltage, AC
250  V
Max. switching voltage, DC
24  V
Number of digital outputs
1  
Rated switching current
6 A  
Switching thresholds
2...105% of measurement range  
Type
Relay, 1 CO contact  
normal / inverse adjustment  

Output (analogue)

Load resistance current
≤ 600 Ω  
Load resistance voltage
≥ 10 kΩ  
Number of analogue outputs
1  
Output current
Adjustable  
0...20 mA  
4...20 mA  
-20…+20 mA  
Output voltage
Adjustable  
0...10 V  
2…10 V  
0...5 V  
1...5 V  
-5…+5 V  
-10...+10 V  
Transmit function
direct or inverted  

General data

Accuracy
<0.75 % FSR  
Configuration
DIP switch and potentiometer  
Galvanic isolation
4-way isolator;  
between input ⁄ output ⁄ supply ⁄ relay  
Power consumption, max.
2,2  W
Power consumption, typ.
0,9  W
Protection degree
IP20  
Rail
TS 35  
Step response time
≤ 300 ms (RMS)  
≤ 60 ms (AA)  
Temperature coefficient
≤ ±100 ppm⁄K @ -25…+55 °C  
≤ ±200 ppm/K @ +55…+70 °C  
Voltage supply
16,8 V…31,2 V  

Insulation coordination

EMC standards
EN 61326-1  
Galvanic isolation
4-way isolator;  
between input ⁄ output ⁄ supply ⁄ relay  
Impulse withstand voltage
6.4 kV (1.2/50 µs)  
Insulation voltage
4 kVeff / 1 min.  
Pollution severity
2  
Rated voltage
300 V ACrms  
Surge voltage category
III  
Test voltage
4  kV

Connection data

Type of connection
Screw connection  
Tightening torque, min.
0,4  Nm
Tightening torque, max.
0,6  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 12  

Important note

Product information
The ACT20P-CMT-XX-(AO)-RC-S series of devices measure and monitor AC and DC currents of up to 60 A. The real effective value method used allows for precise measurement, even for distorted current curve shapes. The devices feature integrated limit value monitoring with an adjustable switching threshold, delay and hysteresis, as well as a relay output..

Features
  • Real effective value measurement (True RMS) or arithmetic averaging (AA) measurement and contactless through-hole technology
  • Limit value monitoring for overcurrent or undercurrent
  • Relay output by means of the open-circuit / closed-circuit principle
  • Adjustable trigger delay for filtering current peaks
  • Operational status and error display on a front panel LED and output signalling according to NE43, NE44, NE107
  • Galvanic four-way insulation for secure isolation according to IEC/EN 61010-2-201
 

Classifications

ETIM 6.0
EC002475  
ETIM 7.0
EC002475  
ETIM 8.0
EC002475  
ETIM 9.0
EC002475  
ETIM 10.0
EC002475  
ECLASS 9.0
27-21-01-23  
ECLASS 9.1
27-21-01-23  
ECLASS 10.0
27-21-01-23  
ECLASS 11.0
27-21-01-23  
ECLASS 12.0
27-21-01-23  
ECLASS 13.0
27-21-01-23  
ECLASS 14.0
27-21-01-23  
ECLASS 15.0
27-21-01-23  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E141197