KLIPPON BDX M20 B
Similar to illustration

KLIPPON BDX M20 B

Klippon BDX (utjämningselement), Utjämningselement, M 20, 10 mm, IP66, Mässing

Produkt-ID 2519520000
Ladda ner datablad Teknisk support
Använda produkter 5
Godkännanden Allmänna beställningsdata Mått och vikter Temperaturer Miljööverenstämmelse för produkt Certificate numbers cable gland General information Klassificeringar

Godkännanden

ROHS
Uppfyllelse 

Allmänna beställningsdata

Version
Klippon BDX (utjämningselement), Utjämningselement, M 20, 10 mm, IP66, Mässing 
Order No.
2519520000 
Type
KLIPPON BDX M20 B 
GTIN (EAN)
4050118532029 
Förp.
1 items

Mått och vikter

Height
12 mm
Bygghöjd (tum)
0.472 inch
Width
27 mm
Byggbredd (tum)
1.063 inch
Length
22 mm
Bygglängd (tum)
0.866 inch
Nettovikt
62 g

Temperaturer

Operating temperature
-60 °C...200 °C 

Miljööverenstämmelse för produkt

RoHS Compliance Status
Kompatibel med undantag 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 

Certificate numbers cable gland

Approval conditions
ATEX 
IECEX 
UL AEx Class Div. 
UL AEx Class Zone 
Certificate no. cable gland (ATEX)
CML 19ATEX3347X 
Certificate no. cable gland (CSA)
E340660 
Certificate no. cable gland (IECEx)
IECEx CML 19.0105X 
Identification
Ex e IIC Gb 
Ex ta IIIC Da 

General information

AF size 1
27 mm
Air flow
0.25 l / 1 h 
Basic material
Brass 
Cable gland
M 20 
Explosion protection type
Improved safety Ex e 
External thread
M 20 
Filter
Bronze insert (90% copper, 10% tin) 
Halogen
halogen-free 
Head diameter
26.2 mm
Impact resistance
7 J ATEX version 
Length of thread
10 mm
Note: protection class
- The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. - The supplied assembly instructions must be read prior to installation and strictly adhered to. - The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. 
O-Ring
Silicone 
Operating temperature range, max.
200 °C
Operating temperature range, min.
-60 °C
Pitch of thread
1.5 mm
Protection class (UL)
Type 4 
Protection degree
IP66 
Protection degree with GWDR
IP66 
Sealing
Silicone 
Silicone
Yes 
Standards
IEC 60079-0 
IEC 60079-7 
IEC 60079-31 
Tightening torque
5 Nm
Torque for connecting adapter, max.
5 Nm
Torque for connecting adapter, min.
5 Nm
Torque for lock nut, max.
5 Nm
Torque for lock nut, min.
5 Nm
UL 94 flammability rating
None 

Klassificeringar

ETIM 8.0
EC000814 
ETIM 9.0
EC000814 
ETIM 10.0
EC000814 
ECLASS 14.0
27-18-28-17 
ECLASS 15.0
27-18-28-17