BLZ 7.50/02/180B SN GN BX
BLZ 7.50/02/180B SN GN BX
Dimensional drawing
BLZ 7.50/02/180B SN GN BX
Derating curve

BLZ 7.50/02/180B SN GN BX

PCB plug-in connector, female plug, 7.50 mm, Number of poles: 2, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box

Art.-Nr. 2864470000
Datenblatt herunterladen Produktdownloads
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, female plug, 7.50 mm, Number of poles: 2, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box 
Order No.
2864470000 
Type
BLZ 7.50/02/180B SN GN BX 
GTIN (EAN)
4064675599968 
VPE
100 Styk
Product data
IEC: 800 V / 18.5 A / 0.2 - 2.5 mm²
UL: 300 V / 15 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
20,1 mm
Depth (inches)
0,791 inch
Height
15,2 mm
Height (inches)
0,598 inch
Width
15 mm
Width (inches)
0,591 inch
Net weight
3,51 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 
Product Carbon Footprint
  • Cradle to gate:
    0.14 kg CO2 eq.

System Parameters

Product family
OMNIMATE Signal - series BL/SL 7.50 
Wire connection method
Clamping yoke connection 
Pitch in mm (P)
7,5 mm
Pitch in inches (P)
0,295 "
Conductor outlet direction
180° 
Number of poles
2 
L1 in mm
7,5 mm
L1 in inches
0,295 "
Pin series quantity
1 
Beröringsskydd enligt DIN VDE 57
Safe from finger touch 
Volume resistance
4.50 mΩ 
Can be coded
Yes 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping screw
M 2.5 
Screwdriver blade standard
DIN 5264 
Plugging cycles
25 
Plugging force/pole, max.
9 N
Pulling force/pole, max.
8,5 N

Material data

Izolační materiál
PBT 
Barevný
Pale green 
Colour chart (similar)
RAL 6021 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0,13 mm²
Clamping range, max.
3,31 mm²
Solid, min. H05(07) V-U
0,2 mm²
eindrähtig, max. H05(07) V-U
2,5 mm²
Flexible, min. H05(07) V-K
0,2 mm²
Flexible, max. H05(07) V-K
2,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,2 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2,5 mm²
med ändhylsa, DIN 46228 pt 1, min.
0,2 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.8 mm x 2.0 mm; 2.4 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0373000000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
Reference text
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Jmenovitý proud, min. počet pólů (Tu=20 °C)
18,5 A
Jmenovitý proud, max. počet pólů (Tu=20 °C)
17 A
Rated current, min. number of poles (Tu=40°C)
15 A
Rated current, max. number of poles (Tu=40°C)
14,5 A
Rated voltage for surge voltage class / pollution degree II/2
800 V
Rated voltage for surge voltage class / pollution degree III/2
630 V
Bemessungsspannung bei Überspannungsk./Verschmutzungsgrad III/3
500 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
6.000 V
Rated impulse voltage for surge voltage class/ pollution degree III/2
6 kV
Jmenovité impulzní napětí pro třídu přepětí / stupeň znečištění III/3
6 kV
Short-time withstand current resistance
3 x 1s with 120 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
15 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Märkström (användargrupp B / UL 1059)
15 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 

Packing

Packaging
Box 
VPE length
136 mm
VPE width
94 mm
VPE height
77 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02