DRMKITP115VAC 4CO LD/PB
Product image
Similar to illustration
DRMKITP115VAC 4CO LD/PB
Wiring diagram
DRMKITP115VAC 4CO LD/PB
Graph
DC load limit curve
Resistive load
DRMKITP115VAC 4CO LD/PB
Graph
Electrical service life
DRMKITP115VAC 4CO LD/PB
Graph
Derating curve
DRMKITP115VAC 4CO LD/PB
Graph
AC operational voltage range
DRMKITP115VAC 4CO LD/PB
Dimensional drawing
Relay in combination with base
DRMKITP115VAC 4CO LD/PB
Miscellaneous
Type codes

DRMKITP115VAC 4CO LD/PB

D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 115 V AC, Continuous current: 5 A, PUSH IN, Test button available: Yes

Product ID 2576020000
Openen in configurator
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 14 Afzonderlijke onderdelen 3 Verwante producten 8
Tanúsítványok General ordering data Méretek és tömegek Temperatures Miljööverenstämmelse för produkt vezérlő oldal Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Tanúsítványok

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 115 V AC, Continuous current: 5 A, PUSH IN, Test button available: Yes 
Order No.
2576020000 
Type
DRMKITP115VAC 4CO LD/PB 
GTIN (EAN)
4050118585773 
Qty.
10 items

Méretek és tömegek

Depth
82,3 mm
Depth (inches)
3,24 inch
Height
101,8 mm
Height (inches)
4,008 inch
Width
30,6 mm
Width (inches)
1,205 inch
Net weight
109,174 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Miljööverenstämmelse för produkt

RoHS Compliance Status
Kompatibel utan undantag 
REACH SVHC
No SVHC above 0.1 wt% 

vezérlő oldal

Rated control voltage
115 V AC 
Rated current AC
12.6 mA (50 Hz) 
10.8 mA (60 Hz) 
Power rating
1.0...1.2VA (60HZ) 
Coil resistance
4340 Ω ± 10 % 
Statusanzeige
red LED 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
10 A / 50 ms 
AC switching capacity (resistive), max.
1250 VA 
Schaltleistung DC (ohmsch), max.
120 W @ 24 V 
Switch-on delay
<20 ms 
Switch-off delay
<20 ms 
Contact type
4 CO contact (AgNi flash gold-plated) 
Mechanical service life
20 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
Yes 
Colour
black 
Komponente mit Brennbarkeitsklasse nach UL94
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
C 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
1.8 kVeff /1 min. 
Dielectric strength of neighbouring contacts
1 kVeff / 1 min 
Dielectric strength of open contact
1 kVeff / 1 min 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Clamping range, rated connection
1,5 mm²
Klemmbereich, min.
0,14 mm²
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Leiteranschlussquerschnitt, eindrähtig, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Klingenmaß
0.4 x 2.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01