MCZ R 120VAC
Product image
Similar to illustration
MCZ R 120VAC
Product image
Similar to illustration
MCZ R 120VAC
Wiring diagram
MCZ R 120VAC
Graph
DC load limit curve
MCZ R 120VAC
Graph
Derating curve
MCZ R 120VAC
Dimensional drawing

MCZ R 120VAC

MCZ SERIES, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 120 V AC -15 % / +10 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No

Tuotteen tunnus 8420880000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 18 Samankaltaiset tuotteet 6
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Rated data UL Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Important note Classifications Approvals

General ordering data

Version
MCZ SERIES, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 120 V AC -15 % / +10 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No  
Order No.
8420880000  
Type
MCZ R 120VAC  
GTIN (EAN)
4008190227036  
Qty.
10  items
Delivery status
This article will no longer be available in the future.  
Available until
28.11.2025  
Alternative product
[2773800000](~/p/2773800000)  

Dimensions and weights

Depth
63,2  mm
Depth (inches)
2,488  inch
Height
91  mm
Height (inches)
3,583  inch
Width
6,1  mm
Width (inches)
0,24  inch
Net weight
24,8  g

Temperatures

Storage temperature
-40 °C...60 °C  
Operating temperature
-25 °C...50 °C  
Humidity
5 - 93% rel. humidity, Tu = 40°C, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
35d83707-6a3b-45b5-b9f8-6ba8184c863e  

Rated data UL

Certificate No. (cURus)
E141197  

Control side

Rated control voltage
120 V AC -15 % / +10 %  
Rated current AC
7 mA  
Power rating
0.85 VA  
Status indicator
Green LED  
Protective circuit
RC element  
Rectifier  

Load side

Rated switching voltage
250 V AC  
Continuous current
6 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Max. switching voltage, DC
250  V
Min. switching power
1 mA @ 24 V  
10 mA @ 10 V  
100 mA @ 5 V  
Inrush current
6 A  
AC switching capacity (resistive), max.
1500 VA  
DC switching capacity (resistive), max.
144 W @ 24 V  
Switch-on delay
<17 ms  
Switch-off delay
<35 ms  
Contact type
1 CO contact (AgSnO)  
Mechanical service life
10 x 106 switching cycles  

General data

Rail
TS 35  
Test button available
No  
Mechanical switch position indicator
No  
Open sides
right  
Colour
beige  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 5.5 mm  
Dielectric strength for control side - load side
4 kVeff / 1 s  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
4 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Certificate No. (CSA)
154685-1198742  
Certificate No. (cURus)
E141197  

Connection data

Wire connection method
Tension-clamp connection  
Stripping length, rated connection
8  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
1,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 16  
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 26  
Wire cross-section, solid, max. (AWG)
AWG 16  
Wire connection cross section, finely stranded, min.
0,5  mm²
Wire connection cross section, finely stranded, max.
1,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26  
Wire cross-section, finely stranded, max. (AWG)
AWG 16  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5  mm²
Blade size
0.6 x 3.5 mm  

Important note

Product information
The cable lengths must not exceed 30 m.  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319226/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate No. (cURus)
E141197