LMFS 7.50/07/180 3.5SN OR BX
LMFS 7.50/07/180 3.5SN OR BX
Product image
LMFS 7.50/07/180 3.5SN OR BX
Dimensional drawing
LMFS 7.50/07/180 3.5SN OR BX
Derating curve
LMFS 7.50/07/180 3.5SN OR BX
Derating curve
LMFS 7.50/07/180 3.5SN OR BX
Product benefits
High reliability of the current capacity
LMFS 7.50/07/180 3.5SN OR BX
Product benefits
Direct conductor entry
Cross section up to 2.5 mm²
LMFS 7.50/07/180 3.5SN OR BX
Product benefits
Maintenance through test point

LMFS 7.50/07/180 3.5SN OR BX

Printed circuit board terminals, 7.50 mm, Number of poles: 7, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Box

Ürün No. 2774810000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 1 İlgili ürünler 11
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 7.50 mm, Number of poles: 7, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Box 
Order No.
2774810000 
Type
LMFS 7.50/07/180 3.5SN OR BX 
GTIN (EAN)
4064675039518 
Qty.
25 adet
Product data
IEC: 1000 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
14,8 mm
Depth (inches)
0,583 inch
Height
18,7 mm
Height (inches)
0,736 inch
Width
52,7 mm
Width (inches)
2,075 inch
Net weight
11,638 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Termékcsalád
OMNIMATE Signal - series LMF 
Vezetékcsatlakozás-technika
PUSH IN 
Felszerelés NYÁK-ra
THT solder connection 
Direzione d'uscita del conduttore
180° 
Raszter mm-ben (P)
7,5 mm
Raszter inch-ben (P)
0,295 "
Number of poles
7 
Pin series quantity
2 
Number of rows
1 
Forrasztótüske hossza (l)
3,5 mm
Forrasztótüske méretei
0.6 x 0.8 mm 
Stripping length
10 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 

Material data

Insulating material
Wemid (PA) 
Colour
orange 
Colour chart (similar)
RAL 2000 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Coating
4-6 μm SN 
Layer structure of solder connection
4...8 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C

Conductors suitable for connection

Wire connection cross section AWG, min.
AWG 24 
Wire connection cross section AWG, max.
AWG 12 
Solid, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
2,5 mm²
Flexible, min. H05(07) V-K
0,25 mm²
Flexible, max. H05(07) V-K
2,5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5 mm²
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
IEC 60947-7-4 
Rated current, min. number of poles (Tu=20°C)
24 A
Rated current, max. number of poles (Tu=20°C)
20 A
Rated current, min. number of poles (Tu=40°C)
23 A
Rated current, max. number of poles (Tu=40°C)
18 A
Rated voltage for surge voltage class / pollution degree II/2
1 000 V
Rated voltage for surge voltage class / pollution degree III/2
600 V
Rated voltage for surge voltage class / pollution degree III/3
500 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
6 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
6 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
6 kV
Short-time withstand current resistance
3 x 1s with 120 A 

Rated data acc. to CSA

Névleges feszültség (B felhasználási csoport / CSA)
300 V
Névleges feszültség (D felhasználási csoport / CSA)
300 V
Névleges áram (B felhasználási csoport / CSA)
20 A
Rated current (Use group D / CSA)
10 A
Vezeték keresztmetszet, AWG, min.
AWG 24 
Vezeték keresztmetszet, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Névleges feszültség (B felhasználási csoport / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Corrente nominale (Gruppo B / UL 1059)
20 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Packing

Imballaggio
Box 
VPE length
338 mm
VPE width
130 mm
Altezza VPE
27 mm

Type tests

테스트: 표시 내구성
  • Standard:
    IEC 61984 section 6.2 and 7.3.2 / 10.11
  • Test:
    mark of origin, type identification, approval marking UL, approval marking CSA, durability
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    IEC 60947-7-4 sections 7.1.2 and 9.3.2 / 01.19
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 12/7
    • Type of conductor and conductor cross-section:
      AWG 24/11
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/11
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0,9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/7
Pull-out test
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/11
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
  • Evaluation:
    passed
  • Requirement:
    ≥ 60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/7

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01