PVC DC 2I 2O 10MPP SPD1R EVO 11
PVC DC 2I 2O 10MPP SPD1R EVO 11
PVC DC 2I 2O 10MPP SPD1R EVO 11

PVC DC 2I 2O 10MPP SPD1R EVO 11

Photovoltaics, Combiner Box, PV Next, 1100 V, 10 MPP's, 2 Inputs / 2 Outputs per MPP, Surge protection I / II, MC4-Evo 2

Tuotteen tunnus 8000107559
Lataa tietosivu Product Downloads Engineering Support
Lisävarusteet 7 On lisävaruste 3 Varaosat 4 Samankaltaiset tuotteet 55
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Included in delivery Guarantee Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Important note Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Photovoltaics, Combiner Box, PV Next, 1100 V, 10 MPP's, 2 Inputs / 2 Outputs per MPP, Surge protection I / II, MC4-Evo 2 
Order No.
8000107559 
Type
PVC DC 2I 2O 10MPP SPD1R EVO 11 
GTIN (EAN)
4099986665378 
Qty.
1 items

Dimensions and weights

Depth
257 mm
Depth (inches)
10,118 inch
Height
485 mm
Height (inches)
19,094 inch
Width
600 mm
Width (inches)
23,622 inch
Net weight
18 100 g

Temperatures

Ambient temperature
-20 °C…50 °C 
Humidity
5 - 90 %, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
bdab5698-6a20-4370-8e28-8810d882d01a 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4
  • Article:
    Dustcap VSSO
  • Quantity:
    40
  • Article:
    Sealing plug
  • Quantity:
    3

Guarantee

Time interval
5 years 

Electrical characteristics

Current per Maximum Power Point, max.
41 A
Rated DC current per connection
  • Current per string, max.:
    41 A
Rated DC voltage
1 100 V
Rated short-term current resistance
  • Rated current:
    51,25 A

Enclosure

Connection type string
Plug MC4-Evo 2 
Enclosure attachment
Via mounting foots 
Impact resistance
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Protection class
II 
Type of mounting
4 screws 
Fixing lugs 

General data

Místo instalace
Protected outdoor area (>1 km from sea) 
Protection degree
IP65 
Standardy
EN 61643-31 

Inputs

Amount of maximum power points (MPP)
10 
DC Input + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      6 mm²
  • Cable entry:
    • Number of cable entries:
      4
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Neither fuse cartridge nor holder 
Fuses
No 
Max. number of DC inputs
per Maximum Power Point 2 inputs connected in parallel 
Number of conduit inlets
20 
Number of string inputs per MPP
≤ 2 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      Tension clamp connection with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
Number of inputs
20 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      6 mm²
Max. number of DC outputs
per Maximum Power Point 2 outputs connected in parallel 

Surge protection DC side

Blitzprüfstrom Iimp (10/350 µs)
5 kA 
Classe di requisiti richiesti
Type I/II 
Consumo de corriente en reposo PC
<0.2 W 
Corrente di scarica In (8/20 µs)
20 kA 
Courant de court-circuit ISCPV
11 000 A
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1 100 V
Protection level Up (+/- , -/PE , +/PE)
≤ 3.8 kV 
Protection level Up (+/PE)
≤ 3.8 kV 
Protection level Up (-/PE)
≤ 3.8 kV 
PV system voltage, max. Ucpv
1 100 V
Standards
EN 61643-31 
Összes kisülési áram Itotal (8/20 µs)
50 kA
Уровень защиты, Up (+/-)
≤ 3.8 kV 
총 방전 전류 I총계 (10/350µs)
10 kA

DC load break switch

Switch disconnector execution
no switch 
Voltage type
DC 

Important note

Product information
The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase 

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with 10 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to EN 51543-32.

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
2 outputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2 to 10:
identical to MPP1

Max. string voltage Uoc: 1100V
1 class/type I + II combined arrester with signal contact
Connection of the signal contact via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm²
Connection of the functional earth via cable glands (8-12mmØ) Conductor cross-section: 16-25mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 469.5x600x248.9 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1:2011 and EN 61439-2:2011