PVN DC 1I 1O 1MPP SPD1R EVO 11
Similar to illustration
PVN DC 1I 1O 1MPP SPD1R EVO 11
PCB design
PVN DC 1I 1O 1MPP SPD1R EVO 11
PVN DC 1I 1O 1MPP SPD1R EVO 11

PVN DC 1I 1O 1MPP SPD1R EVO 11

Photovoltaics, Combiner Box, PV Next, 1100 V, 1 MPP, 1 Input / 1 Output per MPP, Surge protection I / II, MC4-Evo 2

Ürün No. 2914580000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 9 aksesuarıdır 1 Yedek parçalar 1 İlgili ürünler 57
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Included in delivery Guarantee Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Important note Classifications Tender specification sheets

Approvals

ROHS
Conform 

General ordering data

Version
Photovoltaics, Combiner Box, PV Next, 1100 V, 1 MPP, 1 Input / 1 Output per MPP, Surge protection I / II, MC4-Evo 2 
Order No.
2914580000 
Type
PVN DC 1I 1O 1MPP SPD1R EVO 11 
GTIN (EAN)
4099986542020 
Qty.
1 adet

Dimensions and weights

Depth
132 mm
Depth (inches)
5,197 inch
Height
240 mm
Height (inches)
9,449 inch
Width
200 mm
Width (inches)
7,874 inch
Net weight
1.676,4 g

Temperatures

Ambient temperature
-40 °C…50 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
bdab5698-6a20-4370-8e28-8810d882d01a 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4

Guarantee

Time interval
5 years 

Electrical characteristics

Current per Maximum Power Point, max.
30 A
Rated DC current per connection
  • Current per string, max.:
    30 A
Rated DC voltage
1.100 V
Rated short-term current resistance
  • Rated current:
    37,5 A

Enclosure

Connection type string
Plug MC4-Evo 2 
Enclosure attachment
Via mounting foots 
Impact resistance
IK08 in accordance with IEC 62208 
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Polycarbonate 
Type of mounting
Wall mounting 

General data

Installation location
Protected outdoor area (Land and Sea) 
Protection degree
IP65 
Standards
EN 61643-31 

Inputs

Amount of maximum power points (MPP)
1 
Anschluss Funktionserde
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      Tension clamp connection with actuator
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Contatto ausiliario di protezione contro le sovratensioni
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      Tension clamp connection with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
DC Input + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      EN 50618:2015
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Fuses
No 
Nombre max. d'entrées CC
per Maximum Power Point 1 input 
Number of conduit inlets
2 
String bemenetek száma/MPP
1 
Tipo de fusible
Neither fuse cartridge nor holder 
Number of inputs
1 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Max. number of DC outputs
per Maximum Power Point 1 output 

Surge protection DC side

Discharge current In (8/20 µs)
20 kA 
Discharge current, max. (8/20 µs)
40 kA
Lightning test current Iimp (10/350 µs)
5 kA 
Protection level Up (+/- , -/PE , +/PE)
≤ 3.8 kV 
Protection level Up (+/-)
≤ 3.8 kV 
Protection level Up (+/PE)
≤ 3.8 kV 
Protection level Up (-/PE)
≤ 3.8 kV 
PV system voltage, max. Ucpv
1.100 V
Requirements class
Type I/II 
Short-circuit curent ISCPV
11.000 A
Standards
EN 61643-31 
Total discharge current Itotal ( 8/20µs)
50 kA
Total discharge current Itotal (10/350µs)
6,25 kA

DC load break switch

Switch disconnector execution
no switch 
Тип напряжения
DC 

Important note

Product information
The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase 

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with 1 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to DIN CLC/TS 51643-32.

MPP1:
1 input, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
1 output, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

Max. string voltage Uoc: 1100 VDC
1 class/type I + II combined arrester with signal contact
Connection of the signal contact via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm²
Connection of the functional earth via M16 cable glands (Clamping range 5-10 mmØ) Conductor cross-section: ≥ 16 mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 240x200x132 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1 and EN 61439-2