AC SB M 125A 4POL CG 06KV
AC SB M 125A 4POL CG 06KV
AC SB M 125A 4POL CG 06KV
AC SB M 125A 4POL CG 06KV
AC SB M 125A 4POL CG 06KV

AC SB M 125A 4POL CG 06KV

Photovoltaics, Load break switch, Switch disconnector, 600 V AC, 125 A, 4 pole, Manual switch

Produkt ID 3103180000
Download datablad Produktdownloads
Anvendte produkter 7
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Guarantee General data Load break switch Connection Control element Electrical characteristics Enclosure Switch description Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Photovoltaics, Load break switch, Switch disconnector, 600 V AC, 125 A, 4 pole, Manual switch 
Order No.
3103180000 
Type
AC SB M 125A 4POL CG 06KV 
GTIN (EAN)
4099987148382 
Qty.
1 Styk

Dimensions and weights

Depth
142 mm
Depth (inches)
5,591 inch
Height
320 mm
Height (inches)
12,598 inch
Width
205 mm
Width (inches)
8,071 inch
Net weight
1.773 g

Temperatures

Ambient temperature
-25 °C…55 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Guarantee

Time interval
5 years 

General data

Installation location
Protected outdoor area (>1 km from sea) 
Protection degree
IP65 
Standards
IEC 60947-3 

Load break switch

Connection type
Screw connection 
Mechanical endurance class
M2 (10000) 
Nominal current
125 A
Nominal voltage
415 V
Number of contacts as NC contact
0 
Number of contacts as NO contact
4 
Rated mainly active load-breaking current
125 A
Rated peak withstand current
2,5 kA
Rated short-circuit making current
2,1 kA
Voltage type
AC 

Connection

Design as main switch
Yes 
Device with pre-assembled cabling
No 

Control element

Motor drive integrated
No 
Motor drive optional
No 
Type of actuator element
Wing knob 
Voltage release optional
No 

Electrical characteristics

Jmenovitý trvalý proud při AC-23, 400 V
125 A
Podmíněný jmenovitý zkratový proud Iq
20 kA
Potencia de funcionamiento nominal en AC-23, 400 V
55 kW
Switching power at 400 V, max.
86 kW

Enclosure

Adatto per il montaggio frontale al centro
No 
Eszköz felépítésének típusa
Field device 
Suitable for distribution board installation
No 
Подходит для фронтального монтажа, 4 отверстия
No 
中間取り付けに最適
No 

Switch description

Design as emergency stop installation
No 
Design as maintenance- / service switch
Yes 
Design as reversing switch
No 
Design as safety switch
No 
Låsbar
Yes 
Neutral conductor with leading switching
Yes 
Number of auxiliary contacts as change-over contact
0 
Number of auxiliary contacts as normally closed contact
0 
Number of auxiliary contacts as normally open contact
0 
Number of switches
1 

Classifications

ETIM 8.0
EC000216 
ETIM 9.0
EC000216 
ETIM 10.0
EC000216 
ECLASS 14.0
27-37-14-03 
ECLASS 15.0
27-37-14-03 

Tender specification sheets

Long specification

Load break Switch in polyester housing.
Suitable for disconnection on the AC side.
Number of poles: 4
Rated operational current (Ie) (Ie):
- according to IEC (AC-21): 125 A
Rated operational voltage (Ue):
- according to IEC: 415 V

Suitability for use:
Emergency Stop Switch: No
Main Switch: Yes

Number of contacts normally open: 4
Number of contacts normally closed: 0
Number of switching positions: 2
Lockable: Yes
The switch is mounted using 4 screws.
Protection class (IP): 65
Polyester housing with knockouts for cable glands.
Dimensions HxWxD: 320x205x142 mm.

Approved according to Low-voltage Switchgear and Controlgear: IEC 60947-3, DIN VDE 0660 Part 107 (EN 60947-3)