KLIPPON BDX M20 S
Similar to illustration

KLIPPON BDX M20 S

Klippon BDX (compensating elements), Compensating element, M 20, 10 mm, IP66, Stainless steel 1.4404 (316L)

Item No. 2519550000
Download data sheet Engineering Support
Related products 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Certificate numbers cable gland General information Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Klippon BDX (compensating elements), Compensating element, M 20, 10 mm, IP66, Stainless steel 1.4404 (316L) 
Order No.
2519550000 
Type
KLIPPON BDX M20 S 
GTIN (EAN)
4050118532043 
Qty.
1 items

Dimensions and weights

Height
12 mm
Height (inches)
0,472 inch
Width
27 mm
Width (inches)
1,063 inch
Length
22 mm
Length (inches)
0,866 inch
Net weight
60 g

Temperatures

Operating temperature
-60 °C...200 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Certificate numbers cable gland

Approval conditions
ATEX 
IECEX 
UL AEx Class Div. 
UL AEx Class Zone 
Azonosítás
Ex e IIC Gb 
Ex ta IIIC Da 
Certifikatnummer för kabelförskruvning (IECEx)
IECEx CML 19.0105X 
Numero del certificato pressacavo (ATEX)
CML 19ATEX3347X 
케이블 글랜드(CSA) 인증 번호
E340660 

General information

AF 크기 1
27 mm
Couple contre-écrou, max.
5 Nm
Diametro testa
26,2 mm
Explosion protection type
Ex e 
Grado di protezione con guarnizione filettata ad anello
IP66 
Levegőáramlás
0.25 l / 1 h 
O-ring
Silicone 
Protection class (UL)
Type 4 
Utahovací moment připojovacího adaptéru, min.
5 Nm
Vridmoment muffar, max.
5 Nm
기본 재질
Stainless steel 1.4404 (316L) 
나사산 피치
1,5 mm
나사선 길이
10 mm
로크 너트용 토크, 최소
5 Nm
보호 등급
IP66 
실리콘
Yes 
실링
Silicone 
외부 스레드
M 20 
작동 온도 범위, 최대
200 °C
작동 온도 범위, 최소
-60 °C
조임 토크
5 Nm
참고: 보호 등급
- The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. - The supplied assembly instructions must be read prior to installation and strictly adhered to. - The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. 
충격 저항
7 J ATEX version 
케이블 글랜드
M 20 
표준 규격
IEC 60079-0 
IEC 60079-7 
IEC 60079-31 
필터
Bronze insert (90% copper, 10% tin) 
할로겐
halogen-free 

Classifications

ETIM 8.0
EC000814 
ETIM 9.0
EC000814 
ETIM 10.0
EC000814 
ECLASS 14.0
27-18-28-17 
ECLASS 15.0
27-18-28-17