MCZ VFC 0-10V
Product image
MCZ VFC 0-10V
Connection diagram
MCZ VFC 0-10V
Dimensioned drawing
dimensions

MCZ VFC 0-10V

DC/f transformer, Input : 0-10 V, Output frequency: 0...1/ 4/ 8/ 16 kHz

Product ID 8461470000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 7 Verwante producten 5
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Connection data Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
DC/f transformer, Input : 0-10 V, Output frequency: 0...1/ 4/ 8/ 16 kHz  
Order No.
8461470000  
Type
MCZ VFC 0-10V  
GTIN (EAN)
4032248037773  
Qty.
10  items

Dimensions and weights

Depth
63,2  mm
Depth (inches)
2,488  inch
Width
6  mm
Width (inches)
0,236  inch
Length
91  mm
Length (inches)
3,583  inch
Net weight
28,4  g

Temperatures

Storage temperature
-20 °C...85 °C  
Operating temperature
0 °C...60 °C  

Probability of failure

SIL in compliance with IEC 61508
None  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
c2a21576-d875-4548-ae68-5e7f85ddf0c7  

Input

Input resistance, voltage
100 kΩ  
Input voltage
0...10 V  
Number of inputs
1  

Output

Load impedance current
≤ 600 Ω  
Number of outputs
1  
Output current
max. 20 mA  
Output frequency
0...1/ 4/ 8/ 16 kHz  
Output level
PNP, Ub-0.7 V  

General data

Accuracy
0.2 % v. FSR  
Configuration
DIP switch  
Current consumption
14 mA without load  
Long-term drift
0  
Nominal power consumption
2  VA
Operating altitude
≤ 2000 m  
Protection degree
IP20  
Rail
TS 35  
Temperature coefficient
≤ 250 ppm/K  
Voltage supply
24 V DC ± 10 %  

Insulation coordination

EMC standards
EN 61000-6  
Galvanic isolation
between input ⁄ output ⁄ supply  
Impulse withstand voltage
1.5 kV  
Insulation voltage
1 kV DC  
Insulation voltage input or output/rail
4 kVeff / 1 min.  
Pollution severity
2  
Rated voltage
100 V  
Surge voltage category
III  
Test voltage
0,3  kV

Connection data

Type of connection
Tension-clamp connection  
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
1,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 16  
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 26  
Wire cross-section, solid, max. (AWG)
AWG 16  
Wire connection cross section, finely stranded, min.
0,5  mm²
Wire connection cross section, finely stranded, max.
1,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26  
Wire cross-section, finely stranded, max. (AWG)
AWG 16  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5  mm²

Classifications

ETIM 6.0
EC002918  
ETIM 7.0
EC002918  
ETIM 8.0
EC002918  
ETIM 9.0
EC002918  
ETIM 10.0
EC002918  
ECLASS 9.0
27-21-01-28  
ECLASS 9.1
27-21-01-28  
ECLASS 10.0
27-21-01-28  
ECLASS 11.0
27-21-01-28  
ECLASS 12.0
27-21-01-28  
ECLASS 13.0
27-21-01-28  
ECLASS 14.0
27-21-01-28  
ECLASS 15.0
27-21-01-28  

Tender specification sheets

Long specification

DC/f converter for converting a 0...10 V standard signal to 0...1/ 4/ 8/ 16 kHz,
configured with DIP switches
DC/f converter in 6 mm width with external power supply for transmitting and
converting a 0...10 V standard signal into a proportional  0...1/ 4/ 8/ 16 kHz rectangular frequency.
The input and output circuits are electrically isolated.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 91/ 6/ 63.2 mm
Tension-clamp connection / Nominal cross-section 1.5 mm2
Protection degree: IP 20 

Input                             0...10 V
Output                                                 0...1 kHz/ 4 kHz/ 8 kHz/ 16 kHz
                                          PNP: UB - 0.7V / max. 20 mA
Transmission error                  < 0,2 % v. E.
Temperature coefficient       < 250 ppm K
Auxiliary power                                         24 V DC +/- 10 %
Ambient
temperature range 0°C...+50 °C

Isolation                                    1.5 kV
Rated voltage 100 V 
Overvoltage category III
pollution degree 2








Type                                                                MCZ VFC 0-10V

 
Short specification
DC/f converter for converting a  0...10 V standard signal to 0...1/ 4/ 8/ 16 kHz,
configured with DIP switches
DC/f converter in 6 mm width with external power supply,
for transmitting and converting a 0...10 V standard signals into a proportional 0...1/ 4/ 8/ 16 kHz rectangular frequency.
The input and output circuits are electrically isolated.