SCS 24VDC P1SIL3DS I
SCS 24VDC P1SIL3DS I
Wiring diagram
SCS 24VDC P1SIL3DS I
Graph
DC load limit curve
SCS 24VDC P1SIL3DS I
Dimensional drawing
SCS 24VDC P1SIL3DS I
Miscellaneous
Type codes

SCS 24VDC P1SIL3DS I

SAFESERIES, Safety relay,24 V DC (16...36 V DC), , Max. switching current, internal fuse : 5 A, SIL 3, EN 61508:2010

Tuotteen tunnus 2500980000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 19 Samankaltaiset tuotteet 2
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input (safety circuit) Output (safety circuit) Safety-related basic specifications General data Insulation coordination Further details of approvals / standards Connection data Classifications Approvals

General ordering data

Version
SAFESERIES, Safety relay,24 V DC (16...36 V DC), , Max. switching current, internal fuse : 5 A, SIL 3, EN 61508:2010  
Order No.
2500980000  
Type
SCS 24VDC P1SIL3DS I  
GTIN (EAN)
4050118514322  
Qty.
1  items

Dimensions and weights

Depth
114,1  mm
Depth (inches)
4,492  inch
Height
117,3  mm
Height (inches)
4,618  inch
Width
22,5  mm
Width (inches)
0,886  inch
Net weight
180  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...50 °C  
Humidity
95 %, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
807f1906-ce90-4f93-8801-4b128b343e6b  

Input (safety circuit)

Connection designation (safety circuit)
A1  
A2  
Rated control voltage
24 V DC (16...36 V DC)  
Current consumption
50  mA
Status indicator
LED yellow  
Protective circuit
Reverse polarity protection  
Free-wheeling diode  

Output (safety circuit)

Connection designation (safety output)
13  
14  
15  
Contact design
1 x de-energised to safe (NO contact)  
Contact base material
AgNi  
Max. permitted switching voltage
250 V AC / 30 V DC  
Max. permitted switching current
5 A  
Max. switching current, internal fuse
5 A  
Max. switching current, external fuse
5 A  
Max. switching capacity
1250 VA  
Internal fuse
5 A time-lag  
External back-up fuse
5 A time-lag  
Short circuit resistance
No  
Switch-on time
≤ 25 ms  
Switch-off time
≤ 30 ms  
Min. switching capacity
10 mA @ 12 V  

Safety-related basic specifications

Device type
A  
Tproof
12  a
Hardware fault tolerance (HFT)
2  
Safety category
SIL 3  
Safety standard
EN 61508:2010  

General data

Operating altitude
≤ 2000 m  
above sea level  
Rail
TS 35  
Colour
black  
yellow  
Resistance to vibration
DNVGL-CG-0339, class A  

Insulation coordination

Insulation coordination according to
EN 61010-2-201:2013 + AC:2013  
Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 6 mm  
Dielectric strength for control side - load side
3.51 kVeff/5 s  
Type of isolation at input and output
reinforced insulation  
Impulse withstand voltage
6 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Standards
EN 61010-2-201:2013 + AC:2013  
EN 61326-1  
EN 61326-3-1  
EN 61326-3-2  
Certificate no. (cULus)
E141197  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
8  mm
Tightening torque, min.
0,4  Nm
Tightening torque, max.
0,6  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,13  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 12  
Wire cross-section, solid, min.
0,2  mm²
Wire cross-section, solid, max.
2,5  mm²
Wire connection cross section, finely stranded, min.
0,2  mm²
Wire connection cross section, finely stranded, max.
2,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,2  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,2  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5  mm²
Blade size
size PH0  

Classifications

ETIM 6.0
EC001449  
ETIM 7.0
EC001449  
ETIM 8.0
EC001449  
ETIM 9.0
EC001449  
ETIM 10.0
EC001449  
ECLASS 9.0
27-37-18-19  
ECLASS 9.1
27-37-18-19  
ECLASS 10.0
27-37-18-19  
ECLASS 11.0
27-37-18-19  
ECLASS 12.0
27-37-18-19  
ECLASS 13.0
27-37-18-19  
ECLASS 14.0
27-37-18-19  
ECLASS 15.0
27-37-18-19  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319238/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E141197