DRIKIT 115VAC 1CO LD/PB
Product image
Similar to illustration
DRIKIT 115VAC 1CO LD/PB
Wiring diagram
DRIKIT 115VAC 1CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKIT 115VAC 1CO LD/PB
Graph
Electrical service life
DRIKIT 115VAC 1CO LD/PB
Graph
AC operational voltage range
DRIKIT 115VAC 1CO LD/PB
Dimensional drawing
DRIKIT 115VAC 1CO LD/PB
Miscellaneous
Type codes

DRIKIT 115VAC 1CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 10 A, Screw connection, Test button available: Yes

Ürün No. 2476790000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 11 Münferit parçalar 3 İlgili ürünler 14
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications Approvals

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 10 A, Screw connection, Test button available: Yes  
Order No.
2476790000  
Type
DRIKIT 115VAC 1CO LD/PB  
GTIN (EAN)
4050118497014  
Qty.
10  adet

Dimensions and weights

Depth
68  mm
Depth (inches)
2,677  inch
Height
80,2  mm
Height (inches)
3,157  inch
Width
15,8  mm
Width (inches)
0,622  inch
Net weight
51,656  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-40 °C...55 °C  
Humidity
35...85 % rel. humidity, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7cI  
REACH SVHC
No SVHC above 0.1 wt%  

Control side

Rated control voltage
115 V AC  
Rated current AC
9.3 mA  
Power rating
1.1 VA  
Coil resistance
6200 Ω ± 10 %  
Status indicator
red LED  

Load side

Rated switching voltage
250 V AC  
Continuous current
10 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Max. switching voltage, DC
250  V
Min. switching power
10 mA @ 24 V  
10 mA @ 12 V  
100 mA @ 5 V  
AC switching capacity (resistive), max.
2500 VA  
DC switching capacity (resistive), max.
240 W @ 24 V  
Switch-on delay
≤ 15 ms  
Switch-off delay
≤ 10 ms  
Contact type
1 CO contact (AgSnO)  
Mechanical service life
10 x 106 switching cycles  

General data

Rail
TS 35  
Test button available
Yes  
Version of test button
Lockable test button  
Momentary test button  
Mechanical switch position indicator
No  
Colour
black  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250  V
Pollution severity
2  
Surge voltage category
III  
Insulating material group
IIIb  
Clearance and creepage distances for control side - load side
≥ 3 mm  
Dielectric strength for control side - load side
4 kVeff / 1 Min.  
Dielectric strength of open contact
1 kVeff / 1 min  
Impulse withstand voltage
4.8 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Certificate no. (cURus) relay
E312083  
Certificate no. (cURus) base
E355547  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
8  mm
Tightening torque, min.
0,5  Nm
Tightening torque, max.
0,8  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,25  mm²
Clamping range, max.
4  mm²
Wire cross-section, solid, min.
0,25  mm²
Wire cross-section, solid, max.
4  mm²
Wire connection cross section, finely stranded, min.
0,25  mm²
Wire connection cross section, finely stranded, max.
4  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4  mm²
Blade size
size PH1  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform