DRIKIT 24VDC 1CO LD/PB
Product image
Similar to illustration
DRIKIT 24VDC 1CO LD/PB
Wiring diagram
DRIKIT 24VDC 1CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKIT 24VDC 1CO LD/PB
Graph
Electrical service life
DRIKIT 24VDC 1CO LD/PB
Graph
DC operational voltage range
DRIKIT 24VDC 1CO LD/PB
Dimensional drawing
DRIKIT 24VDC 1CO LD/PB
Miscellaneous
Type codes

DRIKIT 24VDC 1CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 10 A, Screw connection, Test button available: Yes

Produkt ID 2476750000
Åbn i konfiguratoren
Download datablad Engineering-support Produktdownloads
Tilbehør 13 Enkeltdele 3 Anvendte produkter 12
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 10 A, Screw connection, Test button available: Yes 
Order No.
2476750000 
Type
DRIKIT 24VDC 1CO LD/PB 
GTIN (EAN)
4050118496970 
Qty.
10 Styk

Dimensions and weights

Depth
68 mm
Depth (inches)
2,677 inch
Height
80,2 mm
Height (inches)
3,157 inch
Width
15,8 mm
Šířka (v palcích)
0,622 inch
Net weight
52,36 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Jmenovité řídicí napětí
24 V DC 
Rated current DC
21,8 mA 
Power rating
530 mW 
Coil resistance
1100 Ω ± 10 % 
Indicador de estado
Green LED 
Protective circuit
Free-wheeling diode 

Load side

Rated switching voltage
250 V AC 
Continuous current
10 A 
Max. četnost spínání při jmenovité zátěži
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
Schaltleistung AC (ohmsch), max.
2500 VA 
Schaltleistung DC (ohmsch), max.
240 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
No 
Colour
black 
Komponente mit Brennbarkeitsklasse nach UL94
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Skupina izolačního materiálu
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
4 kVeff / 1 Min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Connection data

Wire connection method
Screw connection 
Stripping length, rated connection
8 mm
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,8 Nm
Clamping range, rated connection
1,5 mm²
Klemmbereich, min.
0,25 mm²
Klemmbereich, max.
4 mm²
Wire cross-section, solid, min.
0,25 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Dimens. caña destornillador
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01