LMF 5.08/06/180 3.5SN BK BX
Product image
LMF 5.08/06/180 3.5SN BK BX
Product image
LMF 5.08/06/180 3.5SN BK BX
Dimensional drawing
LMF 5.08/06/180 3.5SN BK BX
Graph
LMF 5.08/06/180 3.5SN BK BX
Graph
LMF 5.08/06/180 3.5SN BK BX
Product benefits
Optional conductor outlet direction
Stable mechanical design
LMF 5.08/06/180 3.5SN BK BX
Product benefits
High reliability of the current capacity
LMF 5.08/06/180 3.5SN BK BX
Product benefits
Direct conductor entry
Cross section up to 2.5 mm²
LMF 5.08/06/180 3.5SN BK BX
Product benefits
Maintenance through test point

LMF 5.08/06/180 3.5SN BK BX

Printed circuit board terminals, 5.08 mm, Number of poles: 6, 180°, Solder pin length (l): 3.5 mm, tinned, black, PUSH IN with push button, Clamping range, max. : 2.5 mm², Box

Item No. 1426110000
Download data sheet Engineering Support Product Downloads
Accessories 1 Related products 24
Approvals General ordering data Mått och vikter Environmental Product Compliance System parameters Materialdata Anslutningsbara ledare Номинальные характеристики по IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 6, 180°, Solder pin length (l): 3.5 mm, tinned, black, PUSH IN with push button, Clamping range, max. : 2.5 mm², Box 
Order No.
1426110000 
Type
LMF 5.08/06/180 3.5SN BK BX 
GTIN (EAN)
4050118229905 
Qty.
45 items
Product data
IEC: 400 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 
Packaging
Box 

Mått och vikter

Depth
14,8 mm
Głębokość (cale)
0,583 inch
Height
22,7 mm
Height (inches)
0,894 inch
Height of lowest version
19,2 mm
Width
33,1 mm
Width (inches)
1,303 inch
Net weight
9,243 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LMF 
Wire connection method
PUSH IN with push button 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
180° 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Number of poles
6 
liczba rzędów z biegunami
2 
Fitted by customer
No 
Number of rows
1 
Max. adjacent poles per row
24 
Solder pin length (l)
3,5 mm
Solder pin dimensions
d = 0.8 mm 
Solder eyelet hole diameter (D)
1,1 mm
Tolerancja średnicy otworu oczka lutowniczego (D)
+ 0,1 mm 
liczba kołków lutowanych na biegun
2 
końcówka wkrętaka
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Stripping length
10 mm
L1 in mm
25,4 mm
L1 in inches
1 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Materialdata

Materiał izolacyjny
Wemid (PA) 
Barwny
black 
kolor elementów uruchamiających
orange 
Tabela kolorów (podobny)
RAL 9011 
Porównywalny wskaźnik śledzenia (CTI)
≥ 600 
Klasa palności wg UL 94
V-0 
Contact material
Cu-alloy 
Powierzchnia styku
tinned 
powlekanie
4-6 μm SN 
Typ cynowania
matt 
Struktura warstwowa przyłącza lutowanego
4...6 mm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Anslutningsbara ledare

Clamping range, min.
0,12 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 24 
Wire connection cross section AWG, max.
AWG 12 
jednodrutowe, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
2,5 mm²
cienkodrutowe, min. H05(07) V-K
0,25 mm²
cienkodrutowe, maks. H05(07) V-K
2,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,25 mm²
z AEH z kołnierzem DIN 46 228/4, maks.
2,5 mm²
z tulejką zaciskową, DIN 46228 pt 1, min.
0,25 mm²
z końcówką kablową wg DIN 46 228/1, maks.
2,5 mm²
Sprawdzian trzpieniowy EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Zaciskany przewód
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025860000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9019100000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0186500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0635100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004080000
Tekst referencyjny
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Номинальные характеристики по IEC

пройдены испытания по стандарту
IEC 60664-1 
IEC 60947-7-4 
Prąd znamionowy, min. liczba biegunów (Tu=20°C)
24 A
Prąd znamionowy, maks. liczba biegunów (Tu=20°C)
24 A
Prąd znamionowy, min. liczba biegunów (Tu=40°C)
24 A
Prąd znamionowy, maks. liczba biegunów (Tu=40°C)
24 A
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia II/2
400 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/2
320 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/3
250 V
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia II/2
4 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/2
4 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/3
4 kV
odporność na zwarcia
3 x 1s with 120 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
20 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Napięcie znamionowe (grupa użytkowa D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
20 A
Prąd znamionowy (grupa użytkowa D / UL 1059)
10 A
przekrój przyłącza przewodu AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Packing

Packaging
Box 
VPE length
349 mm
VPE width
140 mm
VPE height
32 mm

Type tests

Test: Durability of markings
  • Standard:
    IEC 61984 section 6.2 and 7.3.2 / 10.11
  • Test:
    mark of origin, type identification, type of material, approval marking UL, approval marking CSA, durability, pitch, date clock
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    IEC 60999-1 section 7 and 9.1 / 11.99, IEC 60947-1 section 8.2.4.5.1 / 03.11
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0,12 mm²
    • Type of conductor and conductor cross-section:
      flexible 0,12 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG26/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/1
  • Evaluation:
    passed
  • Requirement:
    0.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
Pull-out test
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    ≥15 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/1
  • Evaluation:
    passed
  • Requirement:
    ≥60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01