LM2N 3.50/48/90 3.2SN OR BX
Product image
Similar to illustration
LM2N 3.50/48/90 3.2SN OR BX
Dimensional drawing
LM2N 3.50/48/90 3.2SN OR BX
Graph

LM2N 3.50/48/90 3.2SN OR BX

Printed circuit board terminals, 3.50 mm, Number of poles: 48, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box

Tuotteen tunnus 1703920000
Lataa tietosivu Engineering Support Product Downloads
Samankaltaiset tuotteet 23
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection IEC 정격데이터 Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Č. osvědčení (UR)
E60693 

General ordering data

Version
Printed circuit board terminals, 3.50 mm, Number of poles: 48, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box 
Order No.
1703920000 
Type
LM2N 3.50/48/90 3.2SN OR BX 
GTIN (EAN)
4008190910990 
Qty.
20 items
Product data
IEC: 320 V / 13 A / 0.5 - 1.5 mm²
UL: 300 V / 10 A / AWG 28 - AWG 14 
Packaging
Box 

Dimensions and weights

Depth
16,75 mm
Profundidad (pulgadas)
0,659 inch
Height
27,3 mm
Height (inches)
1,075 inch
Height of lowest version
24,1 mm
Width
86,35 mm
Width (inches)
3,4 inch
Čistá hmotnost
38,3 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LM 
Wire connection method
Clamping yoke connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
90° 
Pitch in mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
Number of poles
48 
Número de filas de polos
2 
Fitted by customer
Yes 
Number of rows
2 
Max. adjacent poles per row
24 
Solder pin length (l)
3,2 mm
Solder pin dimensions
1.0 x 0.6 mm 
Solder eyelet hole diameter (D)
1,3 mm
Tolerancia de diámetro de la perforación (D)
+ 0,1 mm 
Número de terminales de soldadura por polo
1 
Punta de destornillador
0.4 x 2.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,2 Nm
Tightening torque, max.
0,2 Nm
Clamping screw
M 2 
Stripping length
5 mm
L1 in mm
80,5 mm
L1 in inches
3,169 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
3.60 mΩ 

Material data

Isolierstoff
PA 
Farbe
orange 
Farbtabelle (ähnlich)
RAL 2000 
Grupo de materiales aislantes
I 
Índice de resistencia al encaminamiento eléctrico (CTI)
≥ 600 
Grado inflamabilidad según UL 94
V-2 
Material de contacto
Cu-alloy 
Superficie de contacto
tinned 
Revestimiento
1-3 μm Ni 
4-6 μm SN 
Tipo de estañado
matt 
Layer structure of solder connection
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Provozní teplota, min.
−50 °C
動作温度、最大
100 °C
Temperature range, installation, min.
−25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Klemmbereich, min.
0,08 mm²
Klemmbereich, max.
2,08 mm²
Sección de conexión del conductor AWG, min.
AWG 28 
Wire connection cross section AWG, max.
AWG 14 
Rígido, mín. H05(07) V-U
0,5 mm²
Rígido, máx. H05(07) V-U
1,5 mm²
Flexible, mín. H05(07) V-K
0,5 mm²
Flexible, máx. H05(07) V-K
1,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
con term. tub. con aislamiento DIN 46 228/4,máx
0,75 mm²
Calibre macho de conformidad con la norma EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
Texto de referencia
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

IEC 정격데이터

tested acc. to standard
IEC 60664-1 
IEC 61984 
Corriente nominal, número de polos mín. (Tu=20 °C)
13 A
Corriente nominal, número de polos máx. (Tu=20 °C)
12 A
Bemessungsstrom, min. Polzahl (Tu=40°C)
11 A
Corriente nominal, número de polos máx. (Tu=40 °C)
10 A
Tensión nominal con categoría de sobretensión/grado de polución II/2
320 V
Tensión nominal con categoría de sobretensión/grado de polución III/2
160 V
Tensión nominal con categoría de sobretensión/grado de polución III/3
160 V
Tensión nominal con categoría de sobretensión/grado de polución II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Sobretensión de choque nominal con categoría de sobretensión/grado de polución III/3
2,5 kV
Resistencia a corrientes de corta duración
3 x 1s with 72 A 

Rated data acc. to CSA

Institute (CSA)
CSA 
Certificate No. (CSA)
154685-1202192 
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 28 
Wire cross-section, AWG, max.
AWG 14 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Institute (UR)
UR 
Certificate No. (UR)
E60693 
Rated voltage (Use group B / UL 1059)
300 V
Tensión nominal (Use Group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
10 A
Intensidad nominal (Use Group D / UL 1059)
10 A
Sección de conexión del conductor AWG, mín.
AWG 28 
Wire cross-section, AWG, max.
AWG 14 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
120 mm
VPE width
90 mm
VPE height
80 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Max. outer diameter of the conductor: 2.9 mm
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01