VPU AC II F 0 N-PE 305/65
Product image
Abb.ähnlich
VPU AC II F 0 N-PE 305/65
Electric symbol
Schematic circuit diagram

VPU AC II F 0 N-PE 305/65

Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, TT nur für N-PE

Tuotteen tunnus 2807540000
Lataa tietosivu Product Downloads
Lisävarusteet 3 Samankaltaiset tuotteet 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Electrical data General data Guarantee Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, TT nur für N-PE  
Order No.
2807540000  
Type
VPU AC II F 0 N-PE 305/65  
GTIN (EAN)
4064675275558  
Qty.
1  items

Dimensions and weights

Depth
64  mm
Depth (inches)
2,52  inch
Height
45  mm
Height (inches)
1,772  inch
Width
18  mm
Width (inches)
0,709  inch
Net weight
42  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-40 °C...85 °C  
Humidity
5 - 95% rel. humidity  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

General data

Colour
blue  
Design
Installation housing; 1TE  
Insta IP 20  
Operating altitude
≤ 4000 m  
Optical function display
green = OK; red = arrester is defective - replace  
Protection degree
IP20 in installed state  
Segment
Power distribution  
UL 94 flammability rating
V-0  
Version
Class II surge protection, no leakage current  

Insulation coordination acc. to EN 50178

Pollution severity
2  
Surge voltage category
III  

Rated data IEC / EN

Combined pulse UOC
6  kV
Discharge current Imax (8/20µs) N-PE
65 kA  
Discharge current In (8/20µs) N-PE
40 kA  
Discharge current In (8/20µs) wire-PE
20 kA  
Energy coordination (≤10 m)
Type II  
Type III  
Follow-on current extinguishing capability Ifi
Follow current need not be taken into account  
Frequency range, max.
60  Hz
Frequency range, min.
50  Hz
Fuse protection
Not required  
Integrated back-up fuse
Yes  
Leakage current at Un
5  µA
Low voltage network
TT nur für N-PE  
Mains voltage
230 V / 400 V  
Max. continuous voltage, Uc (AC)
305 V  
Max. continuous voltage, Uc (N-PE)
305  V
Number of poles
1  
Protection level Up at IN (N-PE)
≤ 1.5 kV  
Requirements category acc. to IEC 61643-11
Type II  
Type III  
Requirements class, acc. to EN 61643-11
T2  
T3  
Response time / fallback time
≤ 100 ns  
Short-circuit current rating ISCCR
100  kA
SPD type
T2  
T3  
Standards
IEC61643-11, EN61643-11  
Temporary surge voltage (over-voltage) - TOV
1 200  V
Voltage type
AC  

Electrical data

Voltage type
AC  

General data

Number of poles
1  
Protection degree
IP20 in installed state  
Colour
blue  

Guarantee

Time interval
5 years  

Important note

Product information
If F1 > 63A gG, then the integrated backup fuse always operates before F1  

Classifications

ETIM 7.0
EC000941  
ETIM 8.0
EC000941  
ETIM 9.0
EC000941  
ETIM 10.0
EC000941  
ECLASS 12.0
27-17-12-02  
ECLASS 13.0
27-17-12-02  
ECLASS 14.0
27-17-12-02  
ECLASS 15.0
27-17-12-02