LXXX 15.00/03/90 4.5SN BK BX
Product image
Similar to illustration
LXXX 15.00/03/90 4.5SN BK BX
Product image
LXXX 15.00/03/90 4.5SN BK BX
Product image
LXXX 15.00/03/90 4.5SN BK BX
Dimensional drawing
LXXX 15.00/03/90 4.5SN BK BX
Graph
LXXX 15.00/03/90 4.5SN BK BX
Graph
LXXX 15.00/03/90 4.5SN BK BX
Graph
Increased power reserves
Optimised application safety
LXXX 15.00/03/90 4.5SN BK BX
Product benefits
Increased power reserves
Optimised application safety
LXXX 15.00/03/90 4.5SN BK BX

LXXX 15.00/03/90 4.5SN BK BX

Printed circuit board terminals, 15.00 mm, Number of poles: 3, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box

Tuotteen tunnus 1047140000
Lataa tietosivu Tekninen tuki Tuotelataukset
Samankaltaiset tuotteet 5
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Zulassungen
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (UR)
E60693 

General ordering data

Verze
Printed circuit board terminals, 15.00 mm, Number of poles: 3, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box 
Código
1047140000 
Typ
LXXX 15.00/03/90 4.5SN BK BX 
GTIN (EAN)
4032248784011 
Qty.
10 items
Product data
IEC: 1000 V / 150 A / 0.5 - 50 mm²
UL: 600 V / 126 A / AWG 20 - AWG 1 
Packaging
Box 

Dimensions and weights

Hloubka
31 mm
깊이 (인치)
1,22 inch
Höhe
56 mm
Height (inches)
2,205 inch
Height of lowest version
51,5 mm
Šířka
46 mm
Width (inches)
1,811 inch
순중량
88 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Power - series LXXX 
Wire connection method
Clamping yoke connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
90° 
Pitch in mm (P)
15 mm
Pitch in inches (P)
0,591 "
Number of poles
3 
핀 시리즈 수량
1 
Fitted by customer
No 
Number of rows
1 
Solder pin length (l)
4,5 mm
Solder pin dimensions
1.2 x 1.2 mm 
Solder eyelet hole diameter (D)
1,6 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
폴당 용접 핀 수
4 
스크류드라이버 블레이드
1.2 x 6.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
2,5 Nm
Tightening torque, max.
4 Nm
Clamping screw
M 6 
Stripping length
18 mm
L1 in mm
30 mm
L1 in inches
1,181 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 

Material data

Matériau isolant
Wemid (PA) 
Couleur
black 
Színskála (hasonló)
RAL 9011 
절연재 그룹
I 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 600 
UL 94 가연성 등급
V-0 
Materiale dei contatti
Cu-alloy 
접점 표면
tinned 
코팅
4-6 μm SN 
Struttura a strati del collegamento a saldare
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
−25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Plage de serrage, min.
0,5 mm²
Plage de serrage, max.
50 mm²
결선 단면규격 AWG, 최소
AWG 20 
Wire connection cross section AWG, max.
AWG 1 
단선, 최소 H05(07) V-U
0,5 mm²
단선, 최대 H05(07) V-U
16 mm²
꼬임, 최소 H07V-R
6 mm²
stranded, 최대 H07V-R
50 mm²
연선, 최소 H05(07) V-K
0,5 mm²
연선, 최대 H05(07) V-K
35 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0,5 mm²
プラスチックカラー付フェルール　DIN 46228 pt 4、最大
35 mm²
w. フェルール、DIN 46228 pt 1、最小.
0,5 mm²
ワイヤエンドフェルール付　DIN 46228 pt 1、最大
35 mm²
クランプ導体
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019180000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004090000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019210000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004110000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565700000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004130000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      10 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0565800000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0379300000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      16 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0566000000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0375200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565600000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004070000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      35 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        19 mm
    • Recommended wire-end ferrule:
      9019320000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0368900000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      50 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004210000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

Corrente di dimensionamento, numero minimo di poli (Tu=20 °C)
150 A
Névleges áram, min. pólusszám (Tu=40°C)
150 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
1 000 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
1 000 V
サージ電圧等級の定格電圧 / 汚染度 III/3
1 000 V
サージ電圧等級の定格インパルス電圧/汚染度 II/2
8 kV
サージ電圧等級の定格インパルス電圧/汚染度 III/2
8 kV
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
8 kV

Rated data acc. to CSA

Institute (CSA)
CSA 
Certificate No. (CSA)
200039-1198743 
Rated voltage (Use group B / CSA)
600 V
Rated voltage (Use group C / CSA)
600 V
Rated voltage (Use group D / CSA)
600 V
Rated current (Use group B / CSA)
127 A
Rated current (Use group C / CSA)
127 A
Rated current (Use group D / CSA)
5 A
Wire cross-section, AWG, min.
AWG 20 
Wire cross-section, AWG, max.
AWG 1 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Institute (UR)
UR 
Certificate No. (UR)
E60693 
Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated current (Use group B / UL 1059)
126 A
정격 전류(사용 그룹 C / UL 1059)
126 A
와이어 단면적, AWG, 최소
AWG 20 
Wire cross-section, AWG, max.
AWG 1 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
255 mm
VPE width
111 mm
VPE height
63 mm

Type tests

Test: Durability of markings
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, type of material, pitch, date clock, approval marking CSA, approval marking UL, durability
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 16 mm²
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      AWG 10/1
    • Type of conductor and conductor cross-section:
      AWG 1/19
    • Type of conductor and conductor cross-section:
      H07V-R50
    • Type of conductor and conductor cross-section:
      H07V-K35
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    2.0 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed
Pull-out test
  • Standard:
    DIN EN 60999 section 8.5 / 04.94
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    ≥ 90N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    > 236 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    > 190 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed

Important note

IPC-Konformität
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Hinweise
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • IP 20 from 16 mm² to 50 mm²
  • The test point can only be used as potential-pickup point.
  • Wire-end ferrules are mandatory for stranded wires with more than 19 strands.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01