LMF 5.00/15/180 3.5SN OR BX
Product image
LMF 5.00/15/180 3.5SN OR BX
Product image
LMF 5.00/15/180 3.5SN OR BX
Dimensional drawing
LMF 5.00/15/180 3.5SN OR BX
Graph
LMF 5.00/15/180 3.5SN OR BX
Graph
LMF 5.00/15/180 3.5SN OR BX
Product benefits
Optional conductor outlet direction
Stable mechanical design
LMF 5.00/15/180 3.5SN OR BX
Product benefits
High reliability of the current capacity
LMF 5.00/15/180 3.5SN OR BX
Product benefits
Direct conductor entry
Cross section up to 2.5 mm²
LMF 5.00/15/180 3.5SN OR BX
Product benefits
Maintenance through test point

LMF 5.00/15/180 3.5SN OR BX

Printed circuit board terminals, 5.00 mm, Number of poles: 15, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN with actuator, Clamping range, max. : 2.5 mm², Box

Tuotteen tunnus 1330320000
Lataa tietosivu Tekninen tuki Tuotelataukset
Lisävarusteet 1 Samankaltaiset tuotteet 23
Approvals General ordering data Dimensions and weights Environmental Product Compliance Parametry systemu Dane materiałowe Провода, подходящие для подключения Rated data acc. to IEC Номинальные характеристики по CSA Rated data acc. to UL 1059 Упаковка Typprovningar Важное примечание Klassificeringar

Approvals

인증
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Uppfyllelse 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(cURus)
E60693 

General ordering data

버전
Printed circuit board terminals, 5.00 mm, Number of poles: 15, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN with actuator, Clamping range, max. : 2.5 mm², Box 
주문 번호
1330320000 
유형
LMF 5.00/15/180 3.5SN OR BX 
GTIN(EAN)
4050118134407 
수량
20 adet
Product data
IEC: 400 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 
Packaging
Box 

Dimensions and weights

깊이
14.8 mm
깊이 (인치)
0.583 inch
높이
22.7 mm
Bygghöjd (tum)
0.894 inch
Höjd lägstbyggande
19.2 mm
너비
77.7 mm
Width (inches)
3.059 inch
순중량
22.3 g

Environmental Product Compliance

RoHS 준수 상태
Compliant without exemption 
REACH SVHC
Nej mSvHC över 0,1 viktprocent 

Parametry systemu

제품군
OMNIMATE Signal — серия LMF 
와이어 결선 방식
PUSH IN с исполнительным устройством 
PCB에 장착
THT lödanslutning 
도체 아웃렛 방향
180° 
피치(mm)(P)
5 mm
피치(인치)(P)
0.197 "
극 수
15 
핀 시리즈 수량
1 
고객 맞춤
No 
Number of rows
1 
층당 최대 인접 폴
24 
솔더 핀 길이(l)
3.5 mm
솔더핀 크기
d = 0.8 mm 
솔더 구멍 직경(D)
1.1 mm
솔더 구멍 직경 공차(D)
+ 0,1 mm 
폴당 용접 핀 수
2 
스크류드라이버 블레이드
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Stripping length
10 mm
L1 in mm
70 mm
L1 in inches
2.756 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Dane materiałowe

절연재
Wemid (PA) 
컬러 코드
оранжевый 
작동 요소의 색상
svart 
컬러 차트(유사)
RAL 2000 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 600 
UL 94 가연성 등급
V-0 
접점 재질
Cu-alloy 
접점 표면
tinned 
코팅
4-6 μm SN 
납땜 유형
matt 
용접 결선의 레이어 구조
4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Провода, подходящие для подключения

클램프 범위, 최소
0.12 mm²
클램프 범위, 최대
2.5 mm²
결선 단면규격 AWG, 최소
AWG 24 
결선 단면규격 AWG, 최대
AWG 12 
단선, 최소 H05(07) V-U
0.5 mm²
단선, 최대 H05(07) V-U
2.5 mm²
연선, 최소 H05(07) V-K
0.25 mm²
연선, 최대 H05(07) V-K
2.5 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0.25 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
2.5 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0.25 mm²
페럴 포함, DIN 46228 pt 1, 최대
2.5 mm²
EN 60999 a x b 규격, ø
2.4 mm x 1.5 mm 
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025860000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9019100000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0186500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0635100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004080000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
24 A
정격 전류, 최대 극 수(Tu=20°C)
24 A
정격 전류, 극 수(Tu=40°C)
24 A
정격 전류, 최대 극 수(Tu=40°C)
24 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
400 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
320 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
250 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
4 kV
단시간 내전류 저항
3 x 1s with 120 A 

Номинальные характеристики по CSA

협회(CSA)
CSA 
인증 번호(CSA)
200039-1815154 
정격 전압(사용 그룹 B / CSA)
300 V
정격 전압(사용 그룹 D / CSA)
300 V
정격 전류(사용 그룹 B / CSA)
20 A
정격 전류(사용 그룹 D / CSA)
10 A
와이어 단면적, AWG, 최소
AWG 24 
와이어 단면적, AWG, 최대
AWG 12 
승인값 참조
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

협회(cURus)
CURUS 
인증 번호(cURus)
E60693 
정격 전압(사용 그룹 B / UL 1059)
300 V
정격 전압(사용 그룹 D / UL 1059)
300 V
정격 전류(사용 그룹 B / UL 1059)
20 A
정격 전류(사용 그룹 D / UL 1059)
10 A
와이어 단면적, AWG, 최소
AWG 24 
와이어 단면적, AWG, 최대
AWG 12 
승인값 참조
Specifications are maximum values, details - see approval certificate. 

Упаковка

패키징
Ящик 
VPE 길이
351 mm
VPE 폭
140 mm
VPE 높이
32 mm

Typprovningar

테스트: 표시 내구성
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    ursprungsmärkning, typmärkning, raster, godkännande märkning UL, hållbarhet
  • Utvärdering:
    tillgänglig
테스트: 클램프 사용 가능한 단면
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
컨덕터의 손상 및 의도치 않은 느슨해짐 테스트
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
풀아웃 테스트
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U1.5
    • Type of conductor and conductor cross-section:
      H07V-K1.5
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed

Важное примечание

IPC 준수
Заявление о соответствии: все изделия разрабатываются, производятся и поставляются в соответствии с установленными международными стандартами и нормами и соответствуют характеристикам, указанным в технической документации, а также обладают декоративными свойствами в соответствии с IPC-A-610, "Класс 2". Любые другие запросы информации об изделиях могут быть рассмотрены по запросу. 
참고 사항
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Klassificeringar

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01