PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P

PICOPAK-VI-2DO-E-P

제한값 모니터링, 입력 : 0-10 V, 출력 : 2 x 트랜지스터

Ürün No. 2957060000
Veri sayfasını indir Engineering Support Product Downloads
İlgili ürünler 2
Agréments 일반 주문 데이터 Dimensions et poids 온도 장애 확률 Conformité environnementale du produit Input Output (digital) General data Insulation coordination Connection data Part description Classifications

Agréments

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/0d1637a4-c7dd-4915-8bc8-4c9de8d8b393/DAP_Master_ICON,w_80,q_80) 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E141197 

일반 주문 데이터

Version
제한값 모니터링, 입력 : 0-10 V, 출력 : 2 x 트랜지스터 
Order No.
2957060000 
Type
PICOPAK-VI-2DO-E-P 
GTIN (EAN)
4099986741331 
Qty.
10 adet

Dimensions et poids

Depth
62,5 mm
깊이 (인치)
2,461 inch
Height
89,4 mm
Height (inches)
3,52 inch
Width
6,4 mm
Width (inches)
0,252 inch
Net weight
28 g

온도

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 

장애 확률

SIL in compliance with IEC 61508
None 

Conformité environnementale du produit

RoHS Compliance Status
준수, 예외 존재 
RoHS Exemption (if applicable/known)
6c, 7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
f814e8b7-24eb-4ad1-8545-4d3e652b59d1 

Input

Input measurement range
min. 1 % of full scale 
Input resistance, voltage
60 kΩ 
Input signal
Source de tension 
Input voltage
0...10 V 
0…1 V DC 
0…100 mV 
Number inputs
1 
Type
Passif 

Output (digital)

Alarm function
High or low alarm 
Continuous current
100 mA 
Hysteresis
1% of adjusted final value 
Loads
Resistive load only 
Max. switching voltage, AC
0 V
Max. switching voltage, DC
30 V
Number of digital outputs
2 
Rated switching current
100 mA 
Type
Transistor, sortie de raccordement PNP à 2 voies 
Polarité de sortie : configurable, 2x sortie PNP ou 1x NPN / 1x PNP 

General data

Configuration
DIP switch and potentiometer 
Current consumption
25 mA 
Mounting rail
TS 35 
Nominal power consumption
0,6 VA
Power consumption
ca. 0.6 W 
Protection degree
IP20 
Status indicator
LED 1 green = Device in operation 
LED 2 yellow = Output 1 active 
LED 3 yellow = Output 2 active 
Step response time
<250 µs (switching threshold at 90% of
max. input signal; RI ≤ 1 kΩ) 
Supply voltage
24 V DC ± 20 % 
Temperature coefficient
± 250 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-4 
EN 61010-1 
Galvanic isolation
Without isolation 
Pollution severity
2 

Connection data

Type of connection
PUSH IN 
Wire connection cross section AWG, min.
AWG 20 
Wire connection cross section AWG, max.
AWG 12 
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²

Part description

Product description
The device is a limit switch for analogue standard signals from 0 to 10 V with two PNP transistor switching outputs.
The threshold values for the two digital outputs are adjustable via potentiometers.
The device is designed for use in industrial environments.
The safety instructions and technical specifications described in this document must be observed (see “Technical data”).

PICOPAK-VI-2DO-E-P configuration:
The DIP switches are located on the side of the device.
You can use the DIP switches to configure the desired measurement range and transistor switching outputs DO 1 and DO 2. 

Classifications

ETIM 8.0
EC002654 
ETIM 9.0
EC002654 
ETIM 10.0
EC002654 
ECLASS 14.0
27-21-01-22 
ECLASS 15.0
27-21-01-22