Skip to content Skip to navigation menu

PRO TOP2 120W 24V 5A UW

PRO TOP2 120W 24V 5A UW

PRO TOP2 120W 24V 5A UW

Download data sheet

PRO TOP2 120W 24V 5A UW

Power supply, switch-mode power supply unit, 24 V

Item No. 2467230000

Properties

General ordering data

Version	Power supply, switch-mode power supply unit, 24 V
Order No.	2467230000
Type	PRO TOP2 120W 24V 5A UW
GTIN (EAN)	4050118482133
Qty.	1 items

Dimensions and weights

Depth	125 mm
Depth (inches)	4.921 inch
Height	130 mm
Height (inches)	5.118 inch
Width	39 mm
Width (inches)	1.535 inch
Net weight	920 g

Storage temperature	-40 °C...85 °C
Operating temperature	-25 °C...75 °C
Humidity at operating temperature	5...95 %, no condensation

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	6c, 7a, 7cI
REACH SVHC	Lead 7439-92-1
SCIP	6d8cdf22-8230-4af8-86c8-3558c716666d

AC input voltage range	85...550 V AC
Connection system	PUSH IN
Current consumption in relation to the input voltage	Voltage type: AC Input voltage: 85 V Input current: 2 A
DC input voltage range	90...800 V DC
Frequency range AC	45…65 Hz
Input fuse (internal)	Yes
Inrush current	max. 5 A
Nominal power consumption	134.8 VA
Power factor	Power factor typical: 0.4 Input voltage: 85 V Ambient temperature: 25 °C Output power: 120 W
Rated input voltage	100 - 500 V AC / 120 - 500 V DC
Recommended back-up fuse	5 A, DI / 6 A, Char. B / 6 A, Char C
Surge protection	Varistor

Connection system	PUSH IN with actuator
DCL - peak load reserve	Boost duration: 15 ms Multiple of the rated current: 600 %
Mains failure bridge-over time	Mains failure bridge-over time, min.: 20 ms Input voltage type: AC Input voltage: 110 V Output current: 5 A Output voltage: 24 V
Nominal output current for U_nom	5 A @ 60 °C
Output power	120 W
Output voltage, max.	28.8 V
Output voltage, min.	22.5 V
Output voltage, note	adjustable with potentiometer or comunication module
Parallel connection option	yes, max 10
Protection against inverse voltage	Yes
Ramp-up time	≤ 100 ms
Rated output voltage	24 V DC ± 1 %
Residual ripple, breaking spikes	< 50 mVss @ U_Nenn, Full Load

Conformal coating	No
Degree of efficiency	89%
Derating	> 60°C (2.5% / 1°C)
Earth leakage current, max.	3.5 mA
Housing version	Metal, corrosion resistant
MTBF	According to Standard: SN 29500 Operating time (hours), min.: 1,583,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 565,900 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 %
Power loss, idling	5 W
Power loss, nominal load	14.8 W
Protection degree	IP20
Start-up	≥ -40 °C
Surge voltage category	II III

EMC / shock / vibration

Interference immunity test acc. to	EN 55032:2015 EN 61000-3-2:2019 IEC 61000-4-4:2012 IEC 61000-4-5:2014 IEC 61000-4-6:2013 IEC 61000-4-8:2009 IEC 61000-4-11:2004 EN 61000-6-3:2007/A1:2011 EN 61000-6-4:2007/A1:2011 EN 61000-3-3:2013+A1:2019 EN 55035:2017 EN 61000-6-1:2019 EN 61000-6-2:2019 IEC 61000-4-2:2008 IEC 61000-4-3:2006+A1:2007+A2:2010
Noise emission in accordance with EN55032	Class B
Shock resistance IEC 60068-2-27	30 g in all directions
Vibration resistance IEC 60068-2-6	2.3 g (on DIN rail) 4 g (with direct mounting)

Insulation coordination

Insulation voltage input / earth	3.2 kV
Insulation voltage output / earth	0.5 kV
Insulation voltage, input/output	3.5 kV
Pollution severity	2
Protection class	I, with PE connection
Surge voltage category	II III

Electrical safety (applied standards)

Electrical machine equipment	Acc. to EN60335-1
For use with electronic equipment	Acc. to EN50178
Protection against dangerous shock currents	Acc. to VDE0106-101
Protective separation / protection against electrical shock	VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage	SELV acc. to IEC 60950-1 PELV according to EN 60204-1
Safety transformers for switch-mode power supplies	According to EN 61558-2-17

Connection data (input)

Conductor cross-section, AWG/kcmil , max.	12
Conductor cross-section, AWG/kcmil , min.	26
Conductor cross-section, flexible , min.	0.5 mm²
Conductor cross-section, rigid , max.	2.5 mm²
Conductor cross-section, rigid , min.	0.5 mm²
Connection system	PUSH IN
Number of terminals	3 for L/N/PE
Wire connection cross section, flexible (input), max.	2.5 mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.	12
Conductor cross-section, AWG/kcmil , min.	20
Conductor cross-section, flexible , max.	2.5 mm²
Conductor cross-section, flexible , min.	0.2 mm²
Conductor cross-section, rigid , max.	2.5 mm²
Conductor cross-section, rigid , min.	0.2 mm²
Connection system	PUSH IN with actuator
Number of terminals	4 (++ / --)

Connection data (signal)

Wire connection cross-section, flexible (signal), max.	1.5 mm²
Wire connection cross-section, flexible (signal), min.	0.2 mm²
Wire connection method	Screw connection
Wire cross-section, AWG/kcmil , max.	16
Wire cross-section, AWG/kcmil , min.	28
Wire cross-section, solid , max.	1.5 mm²
Wire cross-section, solid , min.	0.2 mm²

Floating contact	Yes
LED green/red	Green: Operation (failure-free) Flashing green: advance warning I>90% Green/red flashing: output switched off (switch-off mode) Flashing red: overload/error
Status relay (max. load)	Output voltage OK (30 V DC / 1 A)

Approval/Certificate/Document of Conformity	[DNV Certificate.pdf](https://mdcop.weidmueller.com/mediadelivery/asset/900_305414) [CSA 61010-1 Certificate.pdf](https://mdcop.weidmueller.com/mediadelivery/asset/900_306167) [307384](https://mdcop.weidmueller.com/mediadelivery/asset/900_307384) [DoP EN54.4](https://mdcop.weidmueller.com/mediadelivery/asset/900_310562) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_302238) [UK Conformity Assessed](https://mdcop.weidmueller.com/mediadelivery/asset/900_311057)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_298824) [Application notes -- PROtop-topGUARD_IO-Link_CODESYS](https://mdcop.weidmueller.com/mediadelivery/asset/900_319010) [Application notes -- PROtop_topGUARD_IO-Link_Twincat](https://mdcop.weidmueller.com/mediadelivery/asset/900_319013)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2467230000)
User Documentation	[Instruction sheets](https://mdcop.weidmueller.com/mediadelivery/asset/900_296373)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)
Brochures	[Produkt Information PROTOP DE](http://download.weidmueller.com/asset/download/file/86233) [Produkt Information PROTOP EN](http://download.weidmueller.com/asset/download/file/86234)

Classifications

ETIM 6.0	EC002540
ETIM 7.0	EC002540
ETIM 8.0	EC002540
ETIM 9.0	EC002540
ECLASS 9.0	27-04-07-01
ECLASS 9.1	27-04-07-01
ECLASS 10.0	27-04-07-01
ECLASS 11.0	27-04-07-01
ECLASS 12.0	27-04-07-01
ECLASS 13.0	27-04-07-01
ECLASS 14.0	27-04-07-01

Approvals	![ABS](/picture/ABS.gif) ![BURVER](/picture/BURVER.gif) ![CSA](/picture/CSA.gif) ![CSAEX](/picture/CSAEX.gif) ![DETNORVER](/picture/DETNORVER.gif) ![LLOYDSREG](/picture/LLOYDSREG.gif) ![RINA](/picture/RINA.gif) ![TUEV](/picture/TUEV.gif) ![UKCA](/picture/UKCA.gif)
ROHS	Conform

Accessories