VPU AC II F 0 N-PE 305/65
Product image
Abb.ähnlich
VPU AC II F 0 N-PE 305/65
Electric symbol
Schematic circuit diagram

VPU AC II F 0 N-PE 305/65

Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, TT nur für N-PE

Ürün No. 2807540000
Veri sayfasını indir Product Downloads
Aksesuarlar 3 İlgili ürünler 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Class II surge protection, no leakage current, TT nur für N-PE 
Order No.
2807540000 
Type
VPU AC II F 0 N-PE 305/65 
GTIN (EAN)
4064675275558 
Qty.
1 adet

Dimensions and weights

Depth
64 mm
Depth (inches)
2,52 inch
Высота
45 mm
Height (inches)
1,772 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
42 g

Temperatures

Температура хранения
-40 °C...85 °C 
Ambient temperature
-40 °C…85 °C 
Drifttemperatur
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 

General data

Colour
blue 
Design
Installation housing; 1TE 
Insta IP 20 
Operating altitude
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
Class II surge protection, no leakage current 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Capacità di estinzione della corrente residua Ifi
Follow current need not be taken into account 
Combined pulse UOC
6 kV
Discharge current In (8/20µs) wire-PE
20 kA 
Energy coordination (≤10 m)
Type II 
Type III 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
Not required 
Leakage current at Un
5 µA
Low voltage network
TT nur für N-PE 
Mains voltage
230 V / 400 V 
Max. continuous voltage, Uc (AC)
305 V 
Max. continuous voltage, Uc (N-PE)
305 V
Number of poles
1 
Protection level Up at IN (N-PE)
≤ 1.5 kV 
Rated voltage (AC)
240 V
Requirements category acc. to IEC 61643-11
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T2 
T3 
Response time / fallback time
≤ 100 ns 
Rövidzárlati terhelhetőség ISCCR
100 kA
Signalling contact
No 
SPD type
T2 
T3 
Standards
IEC61643-11, EN61643-11 
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
1.200 V
Voltage type
AC 
Vybíjecí proud Imax. (8/20µs) N-PE
65 kA 
Vybíjecí proud In (8/20 µs) N-PE
40 kA 
통합 백업 퓨즈
Yes 

Connection data

Type of connection
Screw connection 
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, max.
25 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
1 
Protection degree
IP20 in installed state 
Colour
blue 

Guarantee

Time interval
5 years 

Important note

Product information
If F1 > 63A gG, then the integrated backup fuse always operates before F1 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02