W2T 4 DTCA-FT BK
W2T 4 DTCA-FT BK

W2T 4 DTCA-FT BK

Borne seccionable de medición, Conexión brida-tornillo, negro, 4 mm², 28 A, 500 V, Número de conexiones: 4, Número de pisos: 2

Product ID 3019340000
Openen in configurator
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 104 Verwante producten 92
Agréments General ordering data Dimensions and weights Temperaturas Environmental Product Compliance Material data Valores característicos del sistema Additional technical data Conductors for clamping (rated connection) General Rating data Classifications

Agréments

ROHS
Conforme 

General ordering data

Version
Borne seccionable de medición, Conexión brida-tornillo, negro, 4 mm², 28 A, 500 V, Número de conexiones: 4, Número de pisos: 2 
Order No.
3019340000 
Type
W2T 4 DTCA-FT BK 
GTIN (EAN)
4099986930605 
Qty.
50 szt.

Dimensions and weights

Depth
72,5 mm
Profundidad (pulgadas)
2,854 inch
Height
95,5 mm
Height (inches)
3,76 inch
Width
6,1 mm
Szélesség (coll)
0,24 inch
Net weight
33,077 g

Temperaturas

Ambient temperature
-60 °C…85 °C 
連続動作温度、最小
-60 °C
연속 작동 온도, 최대
130 °C

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
Pas de SVHC au-dessus de 0,1 % en poids 

Material data

Basic material
Wemid 
Colour
nero 
작동 요소의 색상
주황색 
UL 94 flammability rating
V-0 

Valores característicos del sistema

End cover plate required
Sí 
Number of potentials
2 
Numero di piani
2 
Numero dei punti di serraggio per piano
2 
Number of potentials per tier
1 
Levels cross-connected internally
아니요 
Szyna montażowa
TS 35 
N-function
Нет 
PE function
Nej 
PEN function
Nej 

Additional technical data

Explosion-tested version
No 
Open sides
right 
Snap-on
Yes 
Type of fixing
TS 35 
Type of mounting
TS 35 

Conductors for clamping (rated connection)

Blade size
0.6 x 3.5 mm 
Clamping range, max.
6 mm²
Clamping range, min.
0,25 mm²
Clamping screw
M 3 
Connection cross-section, finely stranded, max.
6 mm²
Connection cross-section, finely stranded, min.
0,25 mm²
Connection cross-section, stranded, max.
6 mm²
Connection cross-section, stranded, min.
0,25 mm²
Connection direction
on side 
Gauge to IEC 60947-1
A3 
Number of connections
4 
Stripping length
8 mm
Tightening torque, max.
0,8 Nm
Tightening torque, min.
0,5 Nm
Twin wire-end ferrules, max.
1,5 mm²
Twin wire-end ferrules, min.
0,5 mm²
Type of connection
Šroubové připojení 
Type of connection 2
Šroubové připojení 
Wire connection cross section AWG, max.
AWG 10 
Wire connection cross section AWG, min.
AWG 24 
Wire connection cross section, finely stranded, max.
6 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, solid core, max.
6 mm²
Wire connection cross-section, solid core, min.
0,25 mm²

General

Mounting rail
TS 35 
Wire connection cross section AWG, max.
AWG 10 
Wire connection cross section AWG, min.
AWG 24 

Rating data

Rated cross-section
4 mm²
Rated voltage
500 V
Nominal current
28 A
Current at maximum wires
28 A
Объемное сопротивление по стандарту IEC 60947-7-x
3 mΩ
Rated impulse withstand voltage
6 кВ 
Pollution severity
3 
Surge voltage category
III 

Classifications

ETIM 8.0
EC000902 
ETIM 9.0
EC000902 
ETIM 10.0
EC000902 
ECLASS 14.0
27-25-01-09 
ECLASS 15.0
27-25-01-09