text.skipToContent text.skipToNavigation

Lataa tietosivu Samankaltaiset tuotteet

ACT20-FEED-IN-PRO-S

Supply module, Distributes supply voltage to rail bus, Optional connection of backup supply

Tuotteen tunnus 8965500000

Ominaisuudet

General ordering data

Version	Supply module, Distributes supply voltage to rail bus, Optional connection of backup supply
Order No.	8965500000
Type	ACT20-FEED-IN-PRO-S
GTIN (EAN)	4032248785117
Qty.	1 items

Dimensions and weights

Depth	113,6 mm
Depth (inches)	4,472 inch
Height	117,2 mm
Height (inches)	4,614 inch
Width	22,5 mm
Width (inches)	0,886 inch
Net weight	173 g

Temperatures

Storage temperature	-20 °C...85 °C
Ambient temperature	-20 °C…60 °C
Humidity	40 °C / 95 % rel. humidity, no condensation

Probability of failure

SIL in compliance with IEC 61508

None

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	7a, 7cI
REACH SVHC	Lead 7439-92-1
SCIP	2f6dd957-421a-46db-a0c2-cf1609156924

Input

Backup power supply	21.6...26.4 V DC
Input current	max. 4 A
Input voltage	21.6…26.4 V DC
Number of inputs	2
Supply voltage (input)	21.6...26.4 V DC
Trigger level for the power supply	Fault <21 V DC

Output

Number of outputs	1
Output current	Equivalent to input current max. 4 A
Output power	96 W
Output voltage, note	Input voltage -0.5 V DC / 4 A
Supply voltage (output)	24 V DC

Output (digital)

AC power, max.	500 VA / 60 W
Alarm function	Device error Failure of power supply backup power supply
Continuous current	2 A
Max. switching voltage, AC	250 V
Type	Relay, 1 CO contact

General data

Configuration	none
Power consumption	<2 W
Power consumption, max.	1 W
Protection degree	IP20
Rail	TS 35 CH20M Bus
Voltage supply	21.6...26.4 V DC

Insulation coordination

EMC standards

EN 61326-1

Connection data

Type of connection	Screw connection
Tightening torque, min.	0,4 Nm
Tightening torque, max.	0,6 Nm
Clamping range, rated connection	2,5 mm²
Clamping range, min.	0,5 mm²
Clamping range, max.	2,5 mm²
Wire connection cross section AWG, min.	AWG 30
Wire connection cross section AWG, max.	AWG 14

Important note

Product information

The power-feed unit ACT20-FEED-IN-PRO-S distributes the supply voltage for the ACT20 range of devices to the Weidmüller CH20M DIN rail bus. The device also has a connection for a backup power supply. Installation is basically on the Weidmüller CH20M DIN rail bus.

Properties

The power-feed unit ACT20-FEED-IN-PRO-S detects errors on each of the devices mounted on the Weidmüller CH20M DIN rail and sends a collective message to an external controller via the internal status relay.
Two power supplies for the primary and secondary supply (backup) can be optionally connected.
A redundant power supply can be set up using two power-feed units and two separate power supplies.
The status relay is activated when the following conditions are met: ◊ The supply voltage is on the connection terminals 51 and 52 ◊ The backup supply voltage is on the terminals 53 and 54. If the backup power supply is not required, the supplied jumper needs to be inserted between terminals 52 and 53. ◊ The devices mounted on the Weidmüller DIN rail do not report any errors
The device can be used in safe (non-explosive risk) areas or in Zone 2 / Division 2.
The operating status of the power supply and the backup power supply is indicated with two green LEDs.
A malfunction is indicated with a red LED.

Downloads

Approval/Certificate/Document of Conformity	[Application notes -- Certification ATEX](https://mdcop.weidmueller.com/mediadelivery/asset/900_97035) [Library and function block -- Certification IECEx](https://mdcop.weidmueller.com/mediadelivery/asset/900_97155) [Application notes -- Certification UL](https://mdcop.weidmueller.com/mediadelivery/asset/900_192350) [UL certification for canada](https://mdcop.weidmueller.com/mediadelivery/asset/900_321817) [Application notes -- Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_38729)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_66787)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.8965500000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=8965500000)
User Documentation	[Device description -- Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_39334)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC001600
ETIM 7.0	EC001600
ETIM 8.0	EC001600
ETIM 9.0	EC001600
ECLASS 9.0	27-24-26-10
ECLASS 9.1	27-24-26-10
ECLASS 10.0	27-24-26-10
ECLASS 11.0	27-24-26-10
ECLASS 12.0	27-24-26-10
ECLASS 13.0	27-24-26-10
ECLASS 14.0	27-24-26-10

Approvals

Approvals	![CE](/picture/CE.gif) ![CULUS](/picture/CULUS.gif) ![DEKRAATEX](/picture/DEKRAATEX.gif) ![FMEX](/picture/FMEX.gif) ![IECEXDEK](/picture/IECEXDEK.gif)
ROHS	Conform
UL File Number Search	[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)
Certificate no. (cULus)	E337701