LP 5.08/09/135 3.2SN OR BX
Product image
Similar to illustration
LP 5.08/09/135 3.2SN OR BX
Dimensional drawing
LP 5.08/09/135 3.2SN OR BX
Graph

LP 5.08/09/135 3.2SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 9, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box

Tuotteen tunnus 1843170000
Lataa tietosivu Tuotelataukset Tekninen tuki
Lisävarusteet 5 Samankaltaiset tuotteet 10
Zulassungen General ordering data Abmessungen und Gewichte Environmental Product Compliance System parameters Werkstoffdaten Anschließbare Leiter Bemessungsdaten nach IEC Nenndaten nach CSA Rated data acc. to UL 1059 Verpackungen Important note Clasificaciones

Zulassungen

Approvals
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
ROHS
Conformidad 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 9, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box 
Order No.
1843170000 
Type
LP 5.08/09/135 3.2SN OR BX 
GTIN (EAN)
4032248354733 
Qty.
50 Pièce
Indices de produit
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12 
Emballage
Boîte 

Abmessungen und Gewichte

Depth
17,5 mm
Depth (inches)
0,689 inch
Height
20 mm
Altura (pulgadas)
0,787 inch
Altura construcción baja
16,8 mm
Width
46,32 mm
Largeur (pouces)
1,824 inch
Net weight
14,4 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
Sin SVHC por encima del 0,1 % en peso 

System parameters

Skupina produktů
OMNIMATE Signal - series LP 
Metoda připojení vodiče
Clamping yoke connection 
Montáž na PCB desku
Conexión por soldadura THT 
Conductor outlet direction
135° 
Pitch in mm (P)
5,08 mm
Rozteč v palcích (P)
0,2 "
Nombre de pôles
9 
Pin series quantity
1 
Vybavuje zákazník
Sì 
Number of rows
1 
Max. sousedních kolíků na řadu
24 
Pájecí kolík, délka (l)
3,2 mm
Solder pin dimensions
0,75 x 0,9 mm 
Průměr otvoru pájecího očka (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
1 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,6 Nm
Clamping screw
M 3 
Stripping length
6 mm
L1 in mm
40,64 mm
L1 in inches
1,6 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.20 mΩ 

Werkstoffdaten

Insulating material
PA 
Colour
orange 
Colour chart (similar)
RAL 2000 
Insulating material group
I 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 flammability rating
V-2 
Contact material
Cu-alloy 
Contact surface
tinned 
Coating
1-3 μm Ni 
4-6 μm SN 
Tinning type
matt 
Layer structure of solder connection
4...6 µm Ni / 4...6 µm Sn 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Anschließbare Leiter

Clamping range, min.
0,13 mm²
Clamping range, max.
6 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 
Solid, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
6 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2,5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.8 mm x 2.4 mm; 3.0 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Bemessungsdaten nach IEC

geprüft nach Norm
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
32 A
Rated current, max. number of poles (Tu=20°C)
30,5 A
Rated current, min. number of poles (Tu=40°C)
32 A
Rated current, max. number of poles (Tu=40°C)
25 A
Rated voltage for surge voltage class / pollution degree II/2
500 V
Rated voltage for surge voltage class / pollution degree III/2
250 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV
Short-time withstand current resistance
3 x 1s with 120 A 

Nenndaten nach CSA

Institut (CSA)
CSA 
Č. osvědčení (CSA)
200039-1202191 
Jmenovité napětí (aplikační skupina B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Jmenovitý proud (aplikační skupina B / CSA)
20 A
Jmenovitý proud (aplikační skupina D / CSA)
10 A
Průřez vodiče AWG, min.
AWG 26 
Průřez vodiče AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Jmenovité napětí (aplikační skupina B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
20 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26 
Průřez vodiče, AWG, max.
AWG 12 

Verpackungen

Balení
Box 
VPE length
155 mm
VPE width
95 mm
VPE height
80 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Más variantes bajo solicitud
  • Intensidad nominal relativa a la sección nominal y número mín. de polos.
  • Terminal tubular sin aislamientos según DIN 46228/1
  • Terminal tubular con aislamientos según DIN 46228/4
  • P en el dibujo = paso
  • Los datos nom. se refieren al comp. corresp. las distancias en aire y fuga respecto a otros comp. se dimensionan s/normas aplicación relevantes.
  • La toma de prueba solo puede utilizarse como punto de recepción potencial.
  • Almacenamiento a largo plazo del producto con una temperatura promedio de 50 °C y una humedad promedio del 70 %, 36 meses
 

Clasificaciones

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01