LSF-SMT 3.81/04/135 1.5SN BK RL
Product image
LSF-SMT 3.81/04/135 1.5SN BK RL
Product image
LSF-SMT 3.81/04/135 1.5SN BK RL
Dimensional drawing
LSF-SMT 3.81/04/135 1.5SN BK RL
Graph
LSF-SMT 3.81/04/135 1.5SN BK RL
Graph
LSF-SMT 3.81/04/135 1.5SN BK RL
Graph
LSF-SMT 3.81/04/135 1.5SN BK RL
Graph
LSF-SMT 3.81/04/135 1.5SN BK RL
Dimensional drawing
LSF-SMT 3.81/04/135 1.5SN BK RL
Dimensional drawing
Optimised for the SMT process
Safe board-to-board connection

LSF-SMT 3.81/04/135 1.5SN BK RL

Printed circuit board terminals, 3.81 mm, Number of poles: 4, 135°, Solder pin length (l): 1.5 mm, black, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Tape

Produkt ID 1888470000
Download datablad Engineering Support Product Downloads
Anvendte produkter 67
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Omologazioni
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
N° certificato (cURus)
E60693 

General ordering data

Versione
Printed circuit board terminals, 3.81 mm, Number of poles: 4, 135°, Solder pin length (l): 1.5 mm, black, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Tape 
N. d’ordine
1888470000 
Tipo
LSF-SMT 3.81/04/135 1.5SN BK RL 
GTIN (EAN)
4032248494613 
CPZ
190 Styk
Product data
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 28 - AWG 14 
Packaging
Tape 

Dimensions and weights

Profondità
12,7 mm
Profondità (pollici)
0,5 inch
Posizione verticale
14,4 mm
Height (inches)
0,567 inch
Height of lowest version
12,9 mm
Larghezza
15,63 mm
Width (inches)
0,615 inch
Peso netto
4,647 g

Temperatures

Continuous operating temp., max.
120 °C

Environmental Product Compliance

Stato conformità RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Famiglia prodotti
OMNIMATE Signal - series LSF 
Tecnica di collegamento cavi
PUSH IN with actuator 
Montaggio su circuito stampato
THT/THR solder connection 
Direzione d'uscita del conduttore
135° 
Passo in mm (P)
3,81 mm
Passo in pollici (P)
0,15 "
Numero di poli
4 
Numero di serie di poli
1 
assemblabile da parte del cliente
No 
Number of rows
1 
Lunghezza spina a saldare (l)
1,5 mm
Tolleranza della lunghezza del codolo a saldare
+0.1 / -0.3 mm 
Dimensioni del codolo a saldare
0.35 x 0.8 mm 
Dimensioni del codolo a saldare = tolleranza d
0 / -0.1 mm 
Diametro foro di equipaggiamento (D)
1,1 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Numero di codoli a saldare per polo
2 
Stripping length
8 mm
L1 in mm
11,43 mm
L1 in inches
0,45 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.60 mΩ 

Material data

Materiale isolante
LCP GF 
Colori
black 
Colore elementi di azionamento
white 
Tabella dei colori (simile)
RAL 9011 
Gruppo materiali isolanti
IIIa 
Comparative Tracking Index (CTI)
≥ 175 
Moisture Level (MSL)
1 
Classe d'infiammabilità UL 94
V-0 
Materiale dei contatti
Cu-alloy 
Struttura a strati del collegamento a saldare
4...6 µm Sn matt 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
−30 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Campo di sezioni, min.
0,13 mm²
Campo di sezioni, max.
1,5 mm²
Sezione di collegamento cavo AWG, min.
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
rigido, min. H05(07) V-U
0,2 mm²
rigido, max. H05(07) V-U
1,5 mm²
Flessibile, min. H05(07) V-K
0,2 mm²
Flessibile, max. H05(07) V-K
1,5 mm²
con terminale AEH con collare DIN 46 228/4, min.
0,25 mm²
con terminale AEH con collare DIN 46 228/4, max.
0,75 mm²
con terminale, DIN 46228 pt 1, min.
0,25 mm²
con terminale a norma DIN 46 228/1, max.
1,5 mm²
Conduttore innestabile
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025760000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025770000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0690700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9021040000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

Testato secondo lo standard
IEC 60664-1 
IEC 61984 
Corrente di dimensionamento, numero minimo di poli (Tu=20 °C)
17,5 A
Corrente di dimensionamento, numero massimo di poli (Tu=20 °C)
16 A
Corrente di dimensionamento, numero minimo di poli (Tu=40 °C)
17,5 A
Corrente di dimensionamento, numero massimo di poli (Tu = 40°C)
14 A
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
320 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
160 V
Tensione nominale con classe di sovratensione/grado di lordura III/3
160 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
2,5 kV
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
2,5 kV
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
2,5 kV
Portata transitoria
3 x 1s with 80 A 

Rated data acc. to CSA

Istituto (CSA)
CSA 
N° certificato (CSA)
200039-1664286 
Tensione nominale (Gruppo B / CSA)
300 V
Tensione nominale (Gruppo D / CSA)
300 V
Corrente nominale (Gruppo B / CSA)
10 A
Névleges áram (D felhasználási csoport / CSA)
10 A
Sezione di collegamento cavo AWG, min.
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Istituto (cURus)
CURUS 
N° certificato (cURus)
E60693 
Tensione nominale (Gruppo B / UL 1059)
300 V
Tensione nominale (Gruppo D / UL 1059)
300 V
Corrente nominale (Gruppo B / UL 1059)
12 A
Corrente nominale (Gruppo D / UL 1059)
10 A
Sezione di collegamento cavo AWG, min.
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Packing

Imballaggio di livello ESD
rozpraszający ładunki elektrostatyczne 
Imballaggio
Tape 
Lunghezza VPE
430 mm
Larghezza VPE
347 mm
Altezza VPE
49 mm
Profondità nastro (T2)
17,5 mm
Larghezza nastro (W)
32 mm 
Profondità tasca nastro (K0)
17 mm
Altezza tasca nastro (A0)
12,8 mm
Larghezza tasca nastro (B0)
15,93 mm
Separazione tasca nastro (P1)
20 mm
Separazione foro nastro (E)
1,75 mm
Separazione tasca nastro (F)
14,2 mm
Diametro ∅ bobina nastro (A)
330 mm 
Resistenza superficiale
Rs = 109 - 1012 Ω 

Type tests

Test: Durabilità delle siglature
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, pitch, durability
  • Evaluation:
    available
  • Test:
    approval marking UL
  • Evaluation:
    on packaging label
Test: Sezione bloccabile
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U1.5
    • Type of conductor and conductor cross-section:
      H07V-K1.5
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Additional push button colours on request
  • Operating force of slider max. 40 N
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Crimping shape "A" for wire end ferrules with PZ 6/5 crimping tool recommended.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01