WGK 10/Z GN/YE BX
Product image
Similar to illustration
WGK 10/Z GN/YE BX
Dimensional drawing
WGK 10/Z GN/YE BX
Derating curve

WGK 10/Z GN/YE BX

OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 10 mm², Wemid (PA), Direct mounting, Feed-through (bushing)

Product ID 2439400000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 6 Verwante producten 6
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

Zulassungen
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(cURus)
E60693 

General ordering data

Version
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 10 mm², Wemid (PA), Direct mounting, Feed-through (bushing) 
Order No.
2439400000 
Typ
WGK 10/Z GN/YE BX 
GTIN (EAN)
4050118468038 
Кол.
50 PC
Product data
IEC: 500 V / 57 A / 0.5 - 16 mm²
UL: 300 V / 65 A / AWG 24 - AWG 6 
Packaging
Box 

Dimensions and weights

Výška
31 mm
Height (inches)
1,22 inch
Height of lowest version
31 mm
Šířka
13,7 mm
Width (inches)
0,539 inch
Length
13,7 mm
Length (inches)
0,539 inch
Peso neto
17,283 g

Environmental Product Compliance

RoHS-Konformitätsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Power - series WGK 
Wire connection method
Screw connection 
Conductor outlet direction
180° 
Number of poles
1 
Pin series quantity
1 
Fitted by customer
Yes 
Лезвие отвертки
0.8 x 4.0 
Tightening torque, min.
1,5 Nm
Tightening torque, max.
2,4 Nm
Clamping screw
M 4 
Stripping length
11 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 
Type of connection 1
Clamping yoke 
Type of connection 2
Clamping yoke 

Material data

Insulating material
Wemid (PA) 
Colori
Green/yellow 
Tabella dei colori (simile)
Not specified 
UL 94 flammability rating
V-0 
Matériau des contacts
Cu-alloy 
Kontaktyta
tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Clamping range, min.
0,5 mm²
Sección de embornado, máx.
16 mm²
Sezione di collegamento cavo AWG, min.
AWG 24 
Leiteranschlussquerschnitt AWG, max.
AWG 6 
Solid, min. H05(07) V-U
0,5 mm²
jednodrutowe, maks. H05(07) V-U
16 mm²
Semirigido, min. H07V-R
10 mm²
Stranded, max. H07V-R
16 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
10 mm²
con term. tub. con aislamiento DIN 46 228/4,mín.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
10 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5 mm²
érvéghüvellyel, DIN 46228 pt 1, max.
10 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
Текст ссылки
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
Corrente di dimensionamento, numero minimo di poli (Tu=20 °C)
57 A
Corrente di dimensionamento, numero massimo di poli (Tu=20 °C)
57 A
Tensione nominale con classe di sovratensione/grado di lordura III/3
500 V
Tension de choc nominale pour classe de surtension/Degré de pollution III/3
6 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group C / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
65 A
Rated current (Use group C / CSA)
65 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 6 

Rated data acc. to UL 1059

Institute (cURus)
CURUS 
Certificate No. (cURus)
E60693 
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group C / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
65 A
Rated current (Use group C / UL 1059)
65 A
Rated current (Use group D / UL 1059)
10 A
Ledardiameter AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 6 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
210 mm
VPE width
134 mm
VPE height
93 mm

Important note

Hinweise
  • Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates.
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Colours: SW = black; GN/YL = green/yellow; GY = grey
  • Additional variants on request
  • WGK: Rated voltage plastic walls: 1 - 4 mm = 500 V; metal walls: 1 - 2.5 mm = 400 V; metal walls: 2.5 - 4 mm = 250 V
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC001283 
ETIM 9.0
EC001283 
ETIM 10.0
EC001283 
ECLASS 14.0
27-14-11-34 
ECLASS 15.0
27-14-11-34