text.skipToContent text.skipToNavigation

Gegevensblad downloaden

FP PRO TOP3 24/10 2P

FieldPower® power supply unit, IP65, in complete state, 10A, 24 V, DC, IDC terminal, PUSH IN, M12, A-coded

Product ID 2743440000

Eigenschappen

General ordering data

Version	FieldPower® power supply unit, IP65, in complete state, 10A, 24 V, DC, IDC terminal, PUSH IN, M12, A-coded
Order No.	2743440000
Type	FP PRO TOP3 24/10 2P
GTIN (EAN)	4064675038375
Qty.	1 items

Dimensions and weights

Depth	220 mm
Depth (inches)	8,661 inch
Height	196 mm
Height (inches)	7,717 inch
Width	196 mm
Width (inches)	7,717 inch
Net weight	4.000 g

Temperatures

Storage temperature	-10 °C...60 °C
Operating temperature	-25 °C...50 °C
Operating temperature range	-25 °C ... +50 °C (regard derating) Start up ≥ -40 °C
Humidity	35…85%, non condensing and non freezing

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	6c
REACH SVHC	Lead 7439-92-1 Potassium perfluorobutane sulfonate 29420-49-3
SCIP	7645f3b1-6db9-495d-9e21-ab1d894aff05

Input

AC current consumption	0,7 A @ 400 V DC / 0,8 A @ 320 V AC
AC input voltage range	3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
Connection system	IDC terminal
DC input voltage range	450...800 V DC (max. 500 V DC acc. to UL508)
Frequency range AC	45…65 Hz
Input fuse (internal)	3.0 A F (6.3 x 32 mm)
Inrush current	Max. 10 A
Recommended back-up fuse	2 - 3 A, Char. C
Surge protection	Varistor
Wire connection method	IDC terminal PUSH IN

Output

Adjustable rated current	No
Nominal output current for U_nom	10 A @ 60 °C
Output current	10A
Output power	240 W
Output voltage	24 V
Output voltage type	DC
Output voltage, max.	28,8 V
Output voltage, min.	22,5 V
Output voltage, note	(adjustable via potentiometer)
Rated output voltage	24 V DC ± 1 %
Surge protection	Varistor
Switch-on delay	1 s
Triggering characteristic	see characteristic curve
Wire connection method	IDC terminal PUSH IN

General data

Humidity	35…85%, non condensing and non freezing
Installation advice	Lid screws included
Protection degree	IP65 in complete state
Short-circuit protection	Yes internal
Standards	UL 508
Surge voltage category	III II

Insulation coordination

Surge voltage category

III
II

Connection data (input)

Connection system

IDC terminal

Input

AC current consumption	0,7 A @ 400 V DC / 0,8 A @ 320 V AC
AC input voltage range	3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
DC input voltage range	450...800 V DC (max. 500 V DC acc. to UL508)
Frequency range AC	45…65 Hz
Recommended back-up fuse	2 - 3 A, Char. C
Surge protection	Varistor
Inrush current	Max. 10 A
Input fuse (internal)	3.0 A F (6.3 x 32 mm)

Output

Adjustable rated current	No
Output current	10A
Output power	240 W
Output voltage	24 V
Output voltage type	DC
Output voltage, max.	28,8 V
Output voltage, min.	22,5 V
Output voltage, note	(adjustable via potentiometer)
Switch-on delay	1 s
Triggering characteristic	see characteristic curve
Rated output voltage	24 V DC ± 1 %
Nominal output current for U_nom	10 A @ 60 °C

Clamping capacity

Connection data - contact element power bus

Wire connection method:

Insulation displacement connection (IDC)
Blade size of operating tool:

0.6 x 3.5 mm
Number of poles:

5
Conductor connection cross-section, solid, max.:

6 mm²
Conductor connection cross-section, solid, min.:

1,5 mm²
Conductor connection cross-section, stranded, max.:

6 mm²
Conductor connection cross-section, stranded, min.:

2,5 mm²
Conductor connection cross-section, finely stranded, max.:

6 mm²
Conductor connection cross-section, finely stranded, min.:

2,5 mm²
Conductor connection cross-section, finest stranded, max.:

6 mm²
Conductor connection cross-section, finest stranded, min.:

2,5 mm²

Connection data - contact element Branch / Feed-in

Wire connection method:

PUSH IN
Blade size of operating tool:

0.6 x 3.5 mm
Stripping length:

14 mm
Number of poles:

5
Conductor connection cross-section, solid, max.:

6 mm²
Conductor connection cross-section, solid, min.:

0,5 mm²
Conductor connection cross-section, stranded, max.:

6 mm²
Conductor connection cross-section, stranded, min.:

0,5 mm²
Conductor connection cross-section, finely stranded, max.:

10 mm²
Conductor connection cross-section, finely stranded, min.:

0,5 mm²
Conductor connection cross-section, finest stranded, max.:

6 mm²
Conductor connection cross-section, finest stranded, min.:

0,5 mm²
Conductor connection cross-section with wire end ferrule:
- Type of wire end ferrule:
  
  12 mm with plastic collar
- Standard:
  
  DIN 46228/1
- Cross-section, min.:
  
  0,5 mm²
- Cross-section, max.:
  
  6 mm²
- Type of wire end ferrule:
  
  12 mm with plastic collar
- Standard:
  
  DIN 46228/4
- Cross-section, min.:
  
  0,5 mm²
- Cross-section, max.:
  
  6 mm²
- Type of wire end ferrule:
  
  8 mm with plastic collar
- Standard:
  
  DIN 46228/1
- Cross-section, min.:
  
  0,5 mm²
- Cross-section, max.:
  
  6 mm²
- Type of wire end ferrule:
  
  8 mm with plastic collar
- Standard:
  
  DIN 46228/4
- Cross-section, min.:
  
  0,5 mm²
- Cross-section, max.:
  
  6 mm²
- Type of wire end ferrule:
  
  Twin wire-end ferrules
- Cross-section, min.:
  
  0,5 mm²
- Cross-section, max.:
  
  6 mm²

Rated data acc. to IEC

Rated data acc. to IEC for contact element	Voltage type: AC, DC Standard: IEC 60947-7-1, IEC 60947-7-2 Rated voltage: 800 V Rated impulse withstand voltage: 8 kV Rated current (3 loaded poles): 41 A Rated current (4 loaded poles): 25 A
Rated data acc. to IEC for fuse plug	Voltage type: AC Number of phases: 3 Standard: IEC 61984, IEC 60947-7-3 Rated voltage: 36 V Rated impulse withstand voltage: 6 kV Rated current: 12 A
Rated data acc. to IEC for plug-in connector	Voltage type: DC Standard: IEC 60947-7-1, IEC 60947-7-2, IEC 61984 Rated voltage: 690 V Rated impulse withstand voltage: 8 kV Rated current (3 loaded poles): 32 A Rated current (4 loaded poles): 25 A

Rated data acc. to UL

Rated data acc. to UL for contact element	Standard: UL 1059 Note: for use with UL-listed TC-ER cables Conductor connection cross-section, AWG, max.: AWG 10 Conductor connection cross-section, AWG, min.: AWG 14 Rated voltage: 600 V Rated current: 30 A
Rated data acc. to UL for fuse plug	Rated voltage: 600 V Note: for use with UL-listed TC-ER cables Conductor connection cross-section, AWG, min.: AWG 16 Conductor connection cross-section, AWG, max.: AWG 12 Standard: UL 1059 Rated current: 20 A
Rated data acc. to UL for plug-in connector	Standard: UL 1059 Note: for use with UL-listed TC-ER cables Conductor connection cross-section, AWG, max.: AWG 12 Conductor connection cross-section, AWG, min.: AWG 16 Rated voltage: 600 V Rated current: 20 A
Standards	UL 508

Downloads

Approval/Certificate/Document of Conformity	[CE Declaration of Conformity Fieldpower® PROtop and topGUARD](https://mdcop.weidmueller.com/mediadelivery/asset/900_207545)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_178175)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2743440000)
Product Change Notification	[Produktänderungsmitteilung FieldPower® PROtop](https://mdcop.weidmueller.com/mediadelivery/asset/900_174778) [Product Change Notification FieldPower® PROtop](https://mdcop.weidmueller.com/mediadelivery/asset/900_174779) [Technical change to FieldPower® IP65 power supplies](https://mdcop.weidmueller.com/mediadelivery/asset/900_306919) [Technische Änderung für FieldPower® IP65 Stromversorgungen](https://mdcop.weidmueller.com/mediadelivery/asset/900_306920)
User Documentation	[Manual FieldPower® PT6 IEC cURus](https://mdcop.weidmueller.com/mediadelivery/asset/900_252969) [Manual FieldPower® PROtop size 2](https://mdcop.weidmueller.com/mediadelivery/asset/900_313444)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002540
ETIM 7.0	EC002540
ETIM 8.0	EC002540
ETIM 9.0	EC002540
ECLASS 9.1	27-04-07-01
ECLASS 10.0	27-04-07-01
ECLASS 11.0	27-04-07-01
ECLASS 12.0	27-04-07-01
ECLASS 13.0	27-04-90-02
ECLASS 14.0	27-04-07-01

Approvals

Approvals	![CE](/picture/CE.gif) ![CULUS](/picture/CULUS.gif) ![UKCA](/picture/UKCA.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate no. (cULus)	E258476

Connectivity

Electronics

Automation & Software

Workplace & Accessories

Assembly

FP PRO TOP3 24/10 2P

Eigenschappen

Toebehoren

Afzonderlijke onderdelen

Populaire categorieën

Interessante links

Oplossingen

Connectivity

Electronics

Automation & Software

Workplace & Accessories

Assembly

FP PRO TOP3 24/10 2P

Eigenschappen

Toebehoren

Afzonderlijke onderdelen