MTS 5/03 V T4 B T
Product image
MTS 5/03 V T4 B T
Product image
MTS 5/03 V T4 B T
MTS 5/03 V T4 B T
MTS 5/03 V T4 B T
MTS 5/03 V T4 B T

MTS 5/03 V T4 B T

Printed circuit board terminals, PCB terminal, THT solder connection, Pitch in mm (P): 5.00 mm, Number of poles: 3, Tube

Product ID 2913720000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 2 Verwante producten 14
General ordering data Dimensions and weights Temperatures Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Important note Classifications Approvals

General ordering data

Version
Printed circuit board terminals, PCB terminal, THT solder connection, Pitch in mm (P): 5.00 mm, Number of poles: 3, Tube  
Order No.
2913720000  
Type
MTS 5/03 V T4 B T  
GTIN (EAN)
4099986539716  
Qty.
31  items
Product data
IEC: 400 V / 32 A / 0.5 - 4 mm²
UL: 300 V / 18.5 A / AWG 20 - AWG 12  
Packaging
Tube  

Dimensions and weights

Depth
13,2  mm
Depth (inches)
0,52  inch
Height
22,35  mm
Height (inches)
0,88  inch
Height of lowest version
18,85  mm
Width
17,3  mm
Width (inches)
0,681  inch
Net weight
6,774  g

Temperatures

Ambient temperature
-50 °C…80 °C  
Installation temperature
-50 °C to +70 °C  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System parameters

Product family
OMNIMATE 4.0  
Wire connection method
SNAP IN with push button  
Property, clamping point
WireReady  
Mounting onto the PCB
THT solder connection  
Conductor outlet direction
180°  
Pitch in mm (P)
5  mm
Pitch in inches (P)
0,197  "
Number of poles
3  
Pin series quantity
1  
Number of rows
1  
Solder pin length (l)
3,5  mm
Solder pin dimensions
0.6 x 0.8 mm  
Solder eyelet hole diameter (D)
1,3  mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm  
Number of solder pins per pole
2  
Stripping length
9  mm
Stripping length tolerance
  • min.:
    8 mm
  • max.:
    10 mm
L1 in mm
10  mm
L1 in inches
0,394  "
Touch-safe protection acc. to DIN VDE 0470
IP 20  
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch  
Protection degree
IP20  

Material data

Insulating material
PA 9T  
Colour
black  
Colour chart (similar)
RAL 9011  
Insulating material group
I  
Comparative Tracking Index (CTI)
≥ 600  
Moisture Level (MSL)
1  
UL 94 flammability rating
V-0  
Contact material
Cu-alloy  
Contact surface
tinned  
Tinning type
matt  
Storage temperature, min.
-25  °C
Storage temperature, max.
55  °C
Operating temperature, min.
-50  °C
Operating temperature, max.
80  °C

Conductors suitable for connection

Clamping range, min.
0,34  mm²
Clamping range, max.
4  mm²
Wire connection cross section AWG, min.
AWG 12  
Wire connection cross section AWG, max.
AWG 20  
Solid, min. H05(07) V-U
0,5  mm²
Solid, max. H05(07) V-U
2,5  mm²
Flexible, min. H05(07) V-K
0,5  mm²
Flexible, max. H05(07) V-K
4  mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,34  mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2,5  mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5  mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5  mm²
Outer diameter of insulation, max.
4  mm
Clampable conductor
  • Cross-section for conductor connection:
    • nominal:
      0,34 mm
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025770000
  • Cross-section for conductor connection:
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025860000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025950000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
  • Cross-section for conductor connection:
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0635100000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0186500000
  • Cross-section for conductor connection:
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9019160000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004080000

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1  
IEC 61984  
Rated current, min. number of poles (Tu=20°C)
32  A
Rated current, max. number of poles (Tu=20°C)
32  A
Rated current, min. number of poles (Tu=40°C)
32  A
Rated current, max. number of poles (Tu=40°C)
32  A
Rated voltage for surge voltage class / pollution degree II/2
400  V
Rated voltage for surge voltage class / pollution degree III/2
400  V
Rated voltage for surge voltage class / pollution degree III/3
250  V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4  kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4  kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4  kV

Rated data acc. to CSA

Wire cross-section, AWG, min.
AWG 20  
Wire cross-section, AWG, max.
AWG 12  

Rated data acc. to UL 1059

Institute (cURus)
CURUS  
Certificate No. (cURus)
E60693  
Rated voltage (Use group B / UL 1059)
300  V
Rated voltage (Use group D / UL 1059)
300  V
Rated voltage (Use group F / UL 1059)
420  V
Rated current (Use group B / UL 1059)
18,5  A
Rated current (Use group D / UL 1059)
10  A
Wire cross-section, AWG, min.
AWG 20  
Wire cross-section, AWG, max.
AWG 12  
Clearance distance, min.
4  mm
Creepage distance, min.
5,6  mm
Reference to approval values
Specifications are maximum values, details - see approval certificate.  

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.  
Notes
  • Rated current related to rated cross-section & min. No. of poles.
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002643  
ETIM 7.0
EC002643  
ETIM 8.0
EC002643  
ETIM 9.0
EC002643  
ETIM 10.0
EC002643  
ECLASS 9.0
27-44-04-01  
ECLASS 9.1
27-44-04-01  
ECLASS 10.0
27-44-04-01  
ECLASS 11.0
27-46-01-01  
ECLASS 12.0
27-46-01-01  
ECLASS 13.0
27-46-01-01  
ECLASS 14.0
27-46-01-01  
ECLASS 15.0
27-46-01-01  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate No. (cURus)
E60693