text.skipToContent text.skipToNavigation

PVN DC 2I 1O 2MPP SPD1R EVO 11 — PCB design

Gegevensblad downloaden Verwante producten

PVN DC 2I 1O 2MPP SPD1R EVO 11

Photovoltaics, Combiner Box, PV Next, 1100 V, 2 MPP's, 2 Inputs / 1 Output per MPP, Surge protection I / II, MC4-Evo 2

Product ID 2866360000

General ordering data

Version	Photovoltaics, Combiner Box, PV Next, 1100 V, 2 MPP's, 2 Inputs / 1 Output per MPP, Surge protection I / II, MC4-Evo 2
Order No.	2866360000
Type	PVN DC 2I 1O 2MPP SPD1R EVO 11
GTIN (EAN)	4064675604044
Qty.	1 items

Dimensions and weights

Depth	132 mm
Depth (inches)	5,197 inch
Height	236 mm
Height (inches)	9,291 inch
Width	200 mm
Width (inches)	7,874 inch
Net weight	2.100 g

Temperatures

Ambient temperature	-40 °C…50 °C
Humidity	5...95 %, no condensation

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	6c
REACH SVHC	Lead 7439-92-1
SCIP	bdab5698-6a20-4370-8e28-8810d882d01a

Guarantee

Time interval

5 years

Electrical characteristics

Current per Maximum Power Point, max.	45 A
Rated DC voltage	1.100 V
Rated short-term current resistance	Rated current: 67 A

Enclosure

Connection type string	Plug MC4-Evo 2
Enclosure attachment	Via mounting foots
Impact resistance	IK08 in accordance with IEC 62208 IK10 in accordance with IEC 62262
Insulating material	Polyester glass-fibre reinforced, Polycarbonate
Protection class	II
Type of mounting	4 screws Wall mounting

General data

Installation location	Protected outdoor area (Land and Sea)
Protection degree	IP65
Standards	EN 61643-31

Inputs

Amount of maximum power points (MPP)	2
DC Input + & -	Wire connection: Type of connection: Stäubli MC4-Evo 2 connector Wire cross-section, min.: 2,5 mm² Wire cross-section, max.: 16 mm² Cable entry: Number of cable entries: 4
Functional earth connector	Cable entry: Number of cable entries: 1 Wire connection: Type of connection: Screw connection Flexible, max. H05(07) V-K: 25 mm² w. wire end ferrule, DIN 46228 pt 1, max.: 16 mm²
Fuse type	Neither fuse cartridge nor holder
Fuses	No
Max. number of DC inputs	per Maximum Power Point 2 inputs connected in parallel
Number of conduit inlets	4
Number of string inputs per MPP	≤ 2
Surge protection auxiliary contact	Cable entry: Number of cable entries: 1 Wire connection: Type of connection: Tension clamp connection with actuator Flexible, max. H05(07) V-K: 1,5 mm² w. wire end ferrule, DIN 46228 pt 1, max.: 1,5 mm²
Number of inputs	4

Outputs

DC Output + & -	Wire connection: Type of connection: Stäubli MC4-Evo 2 connector Compatible cable crossection: TÜV 2 Pfg1169/08.07 Wire cross-section, min.: 2,5 mm² Wire cross-section, max.: 16 mm²
Max. number of DC outputs	per Maximum Power Point 1 output

Surge protection DC side

Discharge current I_n (8/20 µs)	20 kA
Discharge current, max. (8/20 µs)	40 kA
Lightning test current I_imp (10/350 µs)	6.25 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE	1.100 V
Protection level U_p (+/- , -/PE , +/PE)	≤ 3.8 kV
Protection level U_p (+/-)	≤ 3.8 kV
Protection level U_p (+/PE)	≤ 3.8 kV
Protection level U_p (-/PE)	≤ 3.8 kV
PV system voltage, max. U_cpv	1.100 V
Requirements class	Type I/II
Short-circuit curent I_SCPV	11.000 A
Standards	EN 61643-31
Standby power consumption P_C	<0.2 W
Total discharge current I_total ( 8/20µs)	50 kA
Total discharge current I_total (10/350µs)	12,5 kA

DC load break switch

Switch disconnector execution	no switch
Voltage type	DC

Important note

Product information

The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase

Downloads

Approval/Certificate/Document of Conformity	Declaration of Conformity for PV Next Mini 2
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
Technical Documentation	Customer drawing CAD data -- Schematic Diagram for PV Next 2x 2In 1Out Boxes 2932700000_00_03-2023_DRILL-TEMP_PV-Next_20-20
User Documentation	Manual PV Next String Combiner Box MANUAL PV NEXT IT/ES/FR Manual PV Next Mini
White paper	Fact Sheet DE PV CB Wie man Gebäude gegen Blitzeinschläge schützt Fact Sheet DE PV Wie man die Lebensdauer eines GAK verlängert Fact Sheet EN PV Combiner Box earthing Fact Sheet DE PV Combiner Box Erdung Fact Sheet DE PV CB Wann Sicherungen zu installieren sind Fact Sheet DE CB PV NEXT Fact Sheet EN PV CB When DC fuses are mandatory to install Fact Sheet EN CB PV NEXT Fact Sheet EN PV How to protect buildings against lightning strikes Fact Sheet EN PV How to extend the life time of a Combiner Box Fact Sheet DE CB PV Strings kombinieren Fact Sheet EN CB Combining PV strings
Catalogues	Catalogues in PDF-format

Classifications

ETIM 6.0	EC002928
ETIM 7.0	EC002928
ETIM 8.0	EC003857
ETIM 9.0	EC003857
ECLASS 9.0	22-57-92-03
ECLASS 9.1	22-57-02-90
ECLASS 10.0	22-57-02-90
ECLASS 11.0	22-57-02-92
ECLASS 12.0	22-57-02-92
ECLASS 13.0	22-57-02-92
ECLASS 14.0	22-57-02-92

Tender specification sheets

Long specification

Combiner box for inverters with 2 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to EN 51543-32.

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
1 output, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2:
identical to MPP1

Max. string voltage Uoc: 1100V
1 class/type I + II combined arrester with signal contact
Connection of the signal contact via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm²
Connection of the functional earth via cable glands (8-12mmØ) Conductor cross-section: 16-25mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 236x200x132 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1:2011 and EN 61439-2:2011

Approvals

Approvals
ROHS	Conform

PhotovoltaicsAccessoriesPV marking sets

PV MARKER 1-3 MPP

Product ID:

8000149520

VPE:

1 items

Photovoltaics, Device markers, Accessories, Conductor and cable markers, Cable ties, Marking set, Warning label, Cable marker

Populaire categorieën

Interessante links

Oplossingen

Connectivity

Electronics

Automation & Software

Workplace & Accessories

Assembly

PVN DC 2I 1O 2MPP SPD1R EVO 11