text.skipToContent text.skipToNavigation

Gegevensblad downloaden Verwante producten

PVN DC 3I 3O 2MPP SW SPD1R CG 11

Photovoltaics, Combiner Box, PV Next, 1100 V, 2 MPP's, 3 Inputs / 3 Outputs per MPP, Surge protection I / II, Switch disconnector, Cable gland

Product ID 2890600000

General ordering data

Version	Photovoltaics, Combiner Box, PV Next, 1100 V, 2 MPP's, 3 Inputs / 3 Outputs per MPP, Surge protection I / II, Switch disconnector, Cable gland
Order No.	2890600000
Type	PVN DC 3I 3O 2MPP SW SPD1R CG 11
GTIN (EAN)	4064675878445
Qty.	1 items

Dimensions and weights

Depth	172 mm
Depth (inches)	6,772 inch
Height	235 mm
Height (inches)	9,252 inch
Width	400 mm
Width (inches)	15,748 inch
Net weight	4.210 g

Temperatures

Ambient temperature	-40 °C...+50 °C
Humidity	5...95 %, no condensation

Environmental Product Compliance

RoHS Compliance Status	Compliant
REACH SVHC	Lead 7439-92-1
SCIP	bdab5698-6a20-4370-8e28-8810d882d01a

Guarantee

Time interval

5 years

Electrical characteristics

Current per Maximum Power Point, max.	50 A
Rated DC voltage	1.100 V
Rated short-term current resistance	Rated current: 62,5 A

Enclosure

Connection type string	Internal terminal (with cable gland feed-through)
Enclosure attachment	Via mounting foots
Impact resistance	IK08 in accordance with IEC 62208 IK10 in accordance with IEC 62262
Insulating material	Polyester glass-fibre reinforced, Polycarbonate Polycarbonate
Protection class	II
Type of mounting	Wall mounting

General data

Installation location	Protected outdoor area (Land and Sea)
Protection degree	IP65
Standards	EN 61643-31

Inputs

Amount of maximum power points (MPP)	2
DC Input + & -	Wire connection: Compatible cable crossection: TÜV 2 Pfg1169/08.07 Wire cross-section, min.: 2,5 mm² Wire cross-section, max.: 16 mm² Cable entry: Number of cable entries: 4
Functional earth connector	Cable entry: Number of cable entries: 2 Wire connection: Type of connection: Screw connection Flexible, max. H05(07) V-K: 25 mm² w. wire end ferrule, DIN 46228 pt 1, max.: 16 mm²
Fuse type	Neither fuse cartridge nor holder
Fuses	No
Max. number of DC inputs	per Maximum Power Point 3 inputs connected in parallel
Number of conduit inlets	2
Number of string inputs per MPP	≤ 3
Surge protection auxiliary contact	Cable entry: Number of cable entries: 2 Wire connection: Type of connection: Tension clamp connection with actuator Flexible, max. H05(07) V-K: 1,5 mm² w. wire end ferrule, DIN 46228 pt 1, max.: 1,5 mm²
Number of inputs	3

Outputs

DC Output + & -	Wire connection: Type of connection: PUSH IN Compatible cable crossection: TÜV 2 Pfg1169/08.07 Wire cross-section, min.: 2,5 mm² Wire cross-section, max.: 16 mm²
Max. number of DC outputs	per Maximum Power Point 3 outputs connected in parallel

Surge protection DC side

Discharge current I_n (8/20 µs)	20 kA
Discharge current, max. (8/20 µs)	40 kA
Lightning test current I_imp (10/350 µs)	6.25 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE	1.100 V
Protection level U_p (+/- , -/PE , +/PE)	≤ 3.8 kV
Protection level U_p (+/-)	≤ 3.8 kV
Protection level U_p (+/PE)	≤ 3.8 kV
Protection level U_p (-/PE)	≤ 3.8 kV
PV system voltage, max. U_cpv	1.100 V
Requirements class	Type I/II
Short-circuit curent I_SCPV	11.000 A
Standards	EN 61643-31
Standby power consumption P_C	<0.2 W
Surge protection DC side	1000 V type I + II
Total discharge current I_total ( 8/20µs)	50 kA
Total discharge current I_total (10/350µs)	12,5 kA

DC load break switch

Motor drive available	No
Number of breaking operation cycles at rated current	300
Number of operating cycles	10000
Rated impulse withstand voltage	8 kV
Rated short-circuit making current	1,4 A
Switch disconnector execution	switch in cover
Switching disconnector capacity	DC-PV1 IEC 60947-3

Important note

Product information

The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase

Downloads

Approval/Certificate/Document of Conformity	Declaration of Conformity 3In/Out 2MPP New
Engineering Data	CAD data -- PV Next Schematic Diagram CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
Technical Documentation	2932710000_00_03-2023_DRILL-TEMP_PV-Next_20-40
User Documentation	Manual PV Next String Combiner Box MANUAL PV NEXT IT/ES/FR Manual PV Next Mini Manual PV Next Mini double enclosure
White paper	Fact Sheet DE PV CB Wie man Gebäude gegen Blitzeinschläge schützt Fact Sheet DE PV Wie man die Lebensdauer eines GAK verlängert Fact-Sheet EN PV CB Load break switch Fact Sheet EN CB Combining PV strings Fact Sheet EN PV Combiner Box earthing Fact Sheet DE PV Combiner Box Erdung Fact Sheet DE PV CB Wann Sicherungen zu installieren sind Fact Sheet DE CB PV NEXT Fact Sheet EN PV CB When DC fuses are mandatory to install Fact Sheet EN CB PV NEXT Fact Sheet EN PV How to protect buildings against lightning strikes Fact Sheet EN PV How to extend the life time of a Combiner Box Fact Sheet DE PV CB Lastentrennschalter Fact Sheet DE CB PV Strings kombinieren
Catalogues	Catalogues in PDF-format

Classifications

ETIM 6.0	EC002928
ETIM 7.0	EC002928
ETIM 8.0	EC003857
ETIM 9.0	EC003857
ECLASS 9.0	22-57-92-03
ECLASS 9.1	22-57-02-90
ECLASS 10.0	22-57-02-90
ECLASS 11.0	22-57-02-92
ECLASS 12.0	22-57-02-92
ECLASS 13.0	22-57-02-92
ECLASS 14.0	22-57-02-92

Tender specification sheets

Long specification

Combiner box for inverters with 2 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to EN 51543-32.

MPP1:
3 inputs, connection via M25 cable gland with 3x7mm Ø cable entry. PUSH IN connection / 2.5 - 6mm² single-wire, multi-wire, with/without ferrule.
3 outputs, connection via M25 cable gland with 3x7mm Ø cable entry. PUSH IN connection / 2.5 - 6mm² single-wire, multi-wire, with/without ferrule.

MPP2:
identical to MPP1

Max. string voltage Uoc: 1100V
1 class/type I + II combined arrester with signal contact
With load break switch for safe separation of the string lines
Connection of the signal contact via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm²
Connection of the functional earth via cable glands (8-12mmØ) Conductor cross-section: 16-25mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 235x200x172 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1:2011 and EN 61439-2:2011

Approvals