SLS 5.08/03/180 SN OR BX
Product image
SLS 5.08/03/180 SN OR BX
Product image
SLS 5.08/03/180 SN OR BX
Dimensional drawing
SLS 5.08/03/180 SN OR BX
Graph
SLS 5.08/03/180 SN OR BX
Graph
SLS 5.08/03/180 SN OR BX
Graph

SLS 5.08/03/180 SN OR BX

PCB plug-in connector, male plug, 5.08 mm, Number of poles: 3, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box

Product ID 1627100000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 4 Is contradeel van 24 Verwante producten 18
Godkännanden General ordering data Mått och vikter Environmental Product Compliance Системные параметры Material data Провода, подходящие для подключения Dane znamionowe wg IEC Märkdata enligt CSA Rated data acc. to UL 1059 Packaging Type tests Important note Classifications

Godkännanden

Omologazioni
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
N° certificato (UR)
E60693 

General ordering data

Versione
PCB plug-in connector, male plug, 5.08 mm, Number of poles: 3, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box 
N. d’ordine
1627100000 
Tipo
SLS 5.08/03/180 SN OR BX 
GTIN (EAN)
4008190199616 
CPZ
120 items
Product data
IEC: 400 V / 21.5 A / 0.2 - 2.5 mm²
UL: 300 V / 14 A / AWG 26 - AWG 12 
Packaging
Box 

Mått och vikter

Profondità
22,2 mm
깊이 (인치)
0,874 inch
Posizione verticale
15,3 mm
Height (inches)
0,602 inch
Larghezza
15,24 mm
Width (inches)
0,6 inch
Peso netto
4,9 g

Environmental Product Compliance

Stato conformità RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Системные параметры

Famiglia prodotti
OMNIMATE Signal — серия BL/SL 5.08 
Tipo di collegamento
Field connection 
Tecnica di collegamento cavi
Clamping yoke connection 
Passo in mm (P)
5,08 mm
Passo in pollici (P)
0,2 "
Direzione d'uscita del conduttore
180° 
극 수
3 
L1 in mm
10,16 mm
L1 in pollici
0,4 "
quantità di file
1 
Numero di serie di poli
1 
DIN VDE 57 106에 따른 터치 안전 보호
finger-safe plugged/ back-of-hand-safe unplugged 
Protezione da contatto accidentale secondo DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Protection degree
IP20 
when fully mounted 
Resistenza di passaggio
≤5 mΩ 
Codificabile
Yes 
탈피 길이
7 mm
Clamping screw
M 2.5 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264-A 
Plugging cycles
25 
Plugging force/pole, max.
4 N
Pulling force/pole, max.
3 N
Tightening torque
  • Torque type:
    Wire connection
  • Usage information:
    • Tightening torque:
      • min.:
        0,4 Nm
      • max.:
        0,5 Nm

Material data

절연재
PBT 
컬러 코드
orange 
컬러 차트(유사)
RAL 2000 
절연재 그룹
IIIa 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 200 
UL 94 flammability rating
V-0 
接点材質
Cu-alloy 
접점 표면
tinned 
플러그 접점의 레이어 구조
4...8 µm Sn hot-dip tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Провода, подходящие для подключения

Campo di sezioni, min.
0,13 mm²
Campo di sezioni, max.
3,31 mm²
결선 단면규격 AWG, 최소
AWG 26 
Sezione di collegamento cavo AWG, max.
AWG 12 
단선, 최소 H05(07) V-U
0,2 mm²
단선, 최대 H05(07) V-U
2,5 mm²
꼬임, 최소 H07V-R
0,2 mm²
stranded, 최대 H07V-R
2,5 mm²
연선, 최소 H05(07) V-K
0,2 mm²
연선, 최대 H05(07) V-K
2,5 mm²
con terminale AEH con collare DIN 46 228/4, min.
0,2 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
2,5 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0,2 mm²
ワイヤエンドフェルール付　DIN 46228 pt 1、最大
2,5 mm²
EN 60999 a x b 규격, ø
2.8 mm x 2.0 mm; 2.4 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0373000000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
참조 텍스트
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Dane znamionowe wg IEC

przetestowane zgodnie z normą
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
21,5 A
정격 전류, 최대 극 수(Tu=20°C)
16 A
정격 전류, 극 수(Tu=40°C)
18 A
정격 전류, 최대 극 수(Tu=40°C)
14 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
400 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
320 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
250 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
4 kV
단시간 내전류 저항
3 x 1s with 120 A 

Märkdata enligt CSA

Istituto (CSA)
CSA 
N° certificato (CSA)
200039-1121690 
Tensione nominale (Gruppo B / CSA)
300 V
Tensione nominale (Gruppo D / CSA)
300 V
Corrente nominale (Gruppo B / CSA)
15 A
Corrente nominale (Gruppo D / CSA)
10 A
Sezione di collegamento cavo AWG, min.
AWG 26 
Sezione di collegamento cavo AWG, max.
AWG 12 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Istituto (UR)
UR 
N° certificato (UR)
E60693 
Tensione nominale (Gruppo B / UL 1059)
300 V
Tensione nominale (Gruppo D / UL 1059)
300 V
정격 전류(사용 그룹 B / UL 1059)
14 A
Corrente nominale (Gruppo D / UL 1059)
10 A
Sezione di collegamento cavo AWG, min.
AWG 26 
Sezione di collegamento cavo AWG, max.
AWG 12 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Packaging

Imballaggio
Box 
Lunghezza VPE
349 mm
Larghezza VPE
138 mm
Altezza VPE
32 mm

Type tests

Test: Durabilità delle siglature
  • Standard:
    VDE 0627 Tab. 7 item 3/6.86
  • Test:
    durability
  • Evaluation:
    passed
Test: Sezione bloccabile
  • Standard:
    VDE 0609 part 1 06.83, EN 60947-1 03.91
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
    • Type of conductor and conductor cross-section:
      H05V-U2.5
    • Type of conductor and conductor cross-section:
      H05V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 28
    • Type of conductor and conductor cross-section:
      AWG 14
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    EN 60947-1/1991 section 8.2.4.3
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    EN 60947-1/1991 section 8.2.4.4
  • Requirement:
    ≥5 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/7
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02