TRP 230VUC 1CO

TERMSERIES, Relay module, Number of contacts: 1, CO contact AgNi, Rated control voltage: 230 V UC ±10%, Continuous current: 6 A, PUSH IN, Test button available: No

항목 번호 2618050000

Approvals

Approvals
ROHS
UL File Number Search
Certificate no. (cULus)

General ordering data

Version
Order No.
Type
GTIN (EAN)
수량

Dimensions and weights

Depth
Depth (inches)
Height
높이 (인치)
Width
Width (inches)
Net weight

Temperatures

Storage temperature
Ambient temperature
습도

Environmental Product Compliance

RoHS Compliance Status
RoHS Exemption (if applicable/known)
REACH SVHC
SCIP

정격 데이터 UL

Ambient temperature (operational), max.
Connection cross-section AWG, min.
Connection cross-section AWG, max.
도체의 유형
Pollution severity level

Control side

Rated control voltage
정격 전류 AC
정격 전류 DC
Power rating
Status indicator
보호 회로
정격 제어 전압에서 이탈한 교체 릴레이의 코일 전압
Coil voltage of the replacement relay

부하 측

Rated switching voltage
Continuous current
Max. switching frequency at rated load
최대 스위칭 전압, AC
최대 스위칭 전압, DC
최소 스위칭 전력
Inrush current
AC switching capacity (resistive), max.
DC switching capacity (resistive), max.
Switch-on delay
Switch-off delay
접점 유형
기계적 서비스 수명

General data

Operating altitude
Mounting rail
Test button available
Mechanical switch position indicator
컬러 코드
UL94 flammability rating component

절연 조정

Rated voltage
Pollution severity
Surge voltage category
Clearance and creepage distances for control side - load side
Dielectric strength for control side - load side
입력 및 출력의 절연 유형
개방 접점의 절연 강도
Dielectric strength to mounting rail
Impulse withstand voltage
Protection degree

인증/표준의 추가 세부 사항

인증 번호(DNV)
Certificate no. (cULus)

Connection data

Wire connection method
Stripping length, rated connection
Clamping range, rated connection
Clamping range, min.
Clamping range, max.
결선 단면규격 AWG, 최소
결선 단면규격 AWG, 최대
Wire cross-section, solid, min.
와이어 단면, 솔리드, 최대
와이어 단면적, 솔리드, 최소(AWG)
와이어 단면적, 솔리드, 최대(AWG)
와이어 결선 단면, 가는 꼬임, 최소
와이어 결선 단면, 가는 꼬임, 최대
와이어 단면, 가는 꼬임, 최소(AWG)
와이어 단면, 가는 꼬임, 최대(AWG)
와이어 결선 단면적, 와이어 종단 페룰 DIN 46228/4 채용 가는 꼬임, 최소
와이어 결선 단면적, 와이어 종단 페룰 DIN 46228/4 채용 가는 꼬임, 최대
컨덕터 단면, 연선, AEH(DIN 46228-1), 최소
컨덕터 단면, 연선, AEH(DIN 46228-1), 최대
Blade size

분류

ETIM 8.0
ETIM 9.0
ETIM 10.0
ECLASS 14.0
ECLASS 15.0