VWGK 6 BK BX
Product image
Similar to illustration
VWGK 6 BK BX
Dimensional drawing

VWGK 6 BK BX

OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 6 mm², Wemid (PA), Direct mounting, Feed-through (bushing)

Produkt ID 2484810000
Download datablad Engineering-support Produktdownloads
Tilbehør 6 Anvendte produkter 3
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 6 mm², Wemid (PA), Direct mounting, Feed-through (bushing) 
Order No.
2484810000 
Type
VWGK 6 BK BX 
GTIN (EAN)
4050118520484 
Qty.
50 Styk
Product data
IEC: 500 V / 41 A / 0.5 - 10 mm²
UL: 300 V / 50 A / AWG 22 - AWG 10 
Packaging
Box 

Dimensions and weights

Height
31,5 mm
Height (inches)
1,24 inch
Height of lowest version
31,5 mm
Width
10 mm
Width (inches)
0,394 inch
Length
10,7 mm
Length (inches)
0,421 inch
Net weight
6,248 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Power - series WGK 
Wire connection method
Screw / solder connection 
Conductor outlet direction
180° 
Number of poles
1 
Pin series quantity
1 
Fitted by customer
No 
Screwdriver blade
0.8 x 4.0 
Tightening torque, min.
0,8 Nm
Tightening torque, max.
1,8 Nm
Clamping screw
M 3.5 
Stripping length
13 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 
Type of connection 1
Clamping yoke 
Type of connection 2
Solder connection 

Material data

Insulating material
Wemid (PA) 
Color
black 
Tabella dei colori (simile)
RAL 9011 
UL 94 flammability rating
V-0 
Érintkező anyaga
Cu-alloy 
Contact surface
tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Plage de serrage, min.
0,5 mm²
Clamping range, max.
10 mm²
Sezione di collegamento cavo AWG, min.
AWG 22 
Sección de conexión del conductor AWG, máx.
AWG 10 
Solid, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
10 mm²
Stranded, min. H07V-R
0,5 mm²
Stranded, max. H07V-R
6 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
6 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
6 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5 mm²
érvéghüvellyel, DIN 46228 pt 1, max.
6 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0186100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0244100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0191900000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9004060000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
Rated current, min. number of poles (Tu=20°C)
41 A
Märkström, max. antal poler (Tu=20°C)
41 A
서지 전압 클래스 정격 전압 / 오염 등급 III/3
500 V
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/3
6 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group C / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
50 A
Rated current (Use group C / CSA)
50 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 22 
Wire cross-section, AWG, max.
AWG 10 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group C / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
50 A
Rated current (Use group C / UL 1059)
50 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 22 
Wire cross-section, AWG, max.
AWG 10 

Packing

Packaging
Box 
VPE length
124 mm
VPE width
117 mm
VPE height
50 mm

Important note

Notes
  • Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates.
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Colours: SW = black; GN/YL = green/yellow; GY = grey
  • Additional variants on request
  • VWGK: Rated voltage plastic walls: 1 - 4 mm = 500 V; metal walls: 1 - 4 mm = 500 V
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC001283 
ETIM 9.0
EC001283 
ETIM 10.0
EC001283 
ECLASS 14.0
27-14-11-34 
ECLASS 15.0
27-14-11-34