HDC HP 250 F 35
HDC HP 250 F 35
Ritning
HDC HP 250 F 35
Deratingkurva

HDC HP 250 F 35

HDC insert, Female, Crimp connection, Installation size: 250

Tuotteen tunnus 1079730000
Lataa tietosivu Tekninen tuki Tuotelataukset
Lisävarusteet 5 Samankaltaiset tuotteet 13
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Dane przyłączeniowe PE Power contact Version Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
HDC insert, Female, Crimp connection, Installation size: 250 
Order No.
1079730000 
Type
HDC HP 250 F 35 
GTIN (EAN)
4032248841783 
Qty.
1 items

Dimensions and weights

Length
83.2 mm
Length (inches)
3.276 inch
Diameter
32 mm
Net weight
91.52 g

Temperatures

Limit temperature
-50 °C ... 120 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
6eabd5ae-2d6b-409e-8bdf-87c27ee10e40 

General data

Basic material
Copper alloy 
BG
250 
Conductor cross-section
35 mm²
Operating voltage, max. (total temperature=60°C)
2,300 V
Plugging cycles
≥ 500 
Pollution severity
PD 2 (PD 3) 
Rated current acc. to DIN EN 61984 (ambient temperature=20°C)
160 A
Rated impulse voltage (DIN EN 61984)
15 kV
Requirement set with hazard levels acc. to EN 45545-2
R22 (HL 1-3) 
R23 (HL 1-3) 
Series
HighPower 
Surface finish
Silver passivated 
Type
Female 
UL 94 가연성 등급
V-0 
결선 유형
Crimp connection 
볼륨 저항
≤0.1 mΩ 
설치 사이즈
250 
절연 저항
1010 Ω 
절연재
PA GF 
컬러 코드
black 
플러그 주기, 은
≥ 500 

Dane przyłączeniowe PE

Connection type PE
Crimp connection 
Screw connection 

Power contact

Rated impulse voltage (DIN EN 61984), power contact
15 kV
Stripping length, performance contact
24 mm
Type of connection, power contact
Crimp connection 

Version

Basic material
stop miedzi 
BG
250 
Conductor cross-section, max.
35 mm²
Conductor cross-section, min.
35 mm²
Installation size
250 
Stripping length, rated connection
24 mm
Surface finish
Silver passivated 
Type of connection
Crimp connection 
Volume resistance
≤0.1 mΩ 

Important note

Product information
Depending on the intended operation, internally generated voltages can superimpose the working voltage and contain corresponding peaks. It is imperative to ensure that these peak voltages do not exceed the rated voltage. For applications outside of this specification, please contact us. The rated voltage of 3.0 kV must be reduced by 20% at operating temperatures above 110°C. 

Classifications

ETIM 8.0
EC000796 
ETIM 9.0
EC000796 
ETIM 10.0
EC000796 
ECLASS 14.0
27-44-02-04 
ECLASS 15.0
27-44-02-04