S2L 3.50/04/180F 3.5SN OR BX
Product image
S2L 3.50/04/180F 3.5SN OR BX
Product image
S2L 3.50/04/180F 3.5SN OR BX
Dimensional drawing

S2L 3.50/04/180F 3.5SN OR BX

PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 4, 180°, Solder pin length (l): 3.5 mm, tinned, orange, Box

Product ID 2941840000
Gegevensblad downloaden Productdownloads
Verwante producten 39
Approvals General ordering data Dimensions and weights Environmental Product Compliance Systemparametrar Material data Номинальные характеристики по IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

버전
PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 4, 180°, Solder pin length (l): 3.5 mm, tinned, orange, Box 
주문 번호
2941840000 
유형
S2L 3.50/04/180F 3.5SN OR BX 
GTIN(EAN)
4099986712140 
Product data
IEC: 160 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 

Dimensions and weights

깊이
14,2 mm
Głębokość (cale)
0,559 inch
높이
14 mm
Height (inches)
0,551 inch
Height of lowest version
14,2 mm
너비
14 mm
Width (inches)
0,551 inch
순중량
1,982 g

Environmental Product Compliance

RoHS 준수 상태
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Systemparametrar

Famiglia prodotti
OMNIMATE Signal – serie B2L/S2L 3.50 – 2-radig 
PCB에 장착
THT solder connection 
피치(mm)(P)
3,5 mm
Raster w calach (P)
0,138 "
외향 엘보
180° 
Number of poles
4 
Number of solder pins per pole
1 
Lunghezza spina a saldare (l)
3,5 mm
솔더핀 크기
d = 1.0 mm 
Octagonal 
솔더 구멍 직경(D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Can be coded
Yes 
Plugging cycles
25 
Plugging force/pole, max.
5 N
Pulling force/pole, max.
4 N
Tightening torque
  • Torque type:
    Mounting screw, PCB
  • Usage information:
    • Tightening torque:
      • min.:
        0,1 Nm
      • max.:
        0,15 Nm
    • Recommended screw:
      • Part number:
        1610740000

Material data

절연재
PBT GF 
컬러 코드
orange 
컬러 차트(유사)
RAL 2000 
절연재 그룹
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
접점 재질
Cu-alloy 
접점 표면
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C

Номинальные характеристики по IEC

пройдены испытания по стандарту
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
10 A
정격 전류, 최대 극 수(Tu=20°C)
10 A
정격 전류, 극 수(Tu=40°C)
9 A
정격 전류, 최대 극 수(Tu=40°C)
8,5 A
Rated voltage for surge voltage class / pollution degree II/2
160 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
125 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
80 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
1,5 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
1,5 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
2,5 kV
단시간 내전류 저항
3 x 1s with 77 A 

Rated data acc. to CSA

Tensione nominale (Gruppo B / CSA)
150 V
정격 전류(사용 그룹 B / CSA)
5 A

Rated data acc. to UL 1059

Tensione nominale (Gruppo B / UL 1059)
150 V
정격 전류(사용 그룹 B / UL 1059)
10 A

Packing

패키징
Box 
VPE 길이
352 mm
Larghezza VPE
139 mm
VPE 높이
26 mm

Important note

IPC 준수
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
참고 사항
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • For additional mechanical support for male connectors with screw flange (…F), we recommend an additional cable gland with fastening screws (sheet metal screw ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C – see Accessories). Cable gland only permitted before soldering.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01