LSF-SMT APL 3.81/03/135 3.5SN BK TU
LSF-SMT APL 3.81/03/135 3.5SN BK TU
LSF-SMT APL 3.81/03/135 3.5SN BK TU
Graph
LSF-SMT APL 3.81/03/135 3.5SN BK TU
Graph
LSF-SMT APL 3.81/03/135 3.5SN BK TU
Graph

LSF-SMT APL 3.81/03/135 3.5SN BK TU

Printed circuit board terminals, 3.81 mm, Number of poles: 3, 135°, Solder pin length (l): 3.5 mm, tinned, black, PUSH IN with push button, Clamping range, max. : 1.5 mm², Tube

Product ID 2875050000
Gegevensblad downloaden Product Downloads
Verwante producten 9
General ordering data Dimensions and weights Temperatures Environmental Product Compliance System specifications Electrical properties Material data Packing Type tests Important note Classifications Approvals

General ordering data

Version
Printed circuit board terminals, 3.81 mm, Number of poles: 3, 135°, Solder pin length (l): 3.5 mm, tinned, black, PUSH IN with push button, Clamping range, max. : 1.5 mm², Tube  
Order No.
2875050000  
Type
LSF-SMT APL 3.81/03/135 3.5SN BK TU  
GTIN (EAN)
4064675650263  
Qty.
46  items
Product data
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 28 - AWG 14  
Packaging
Tube  

Dimensions and weights

Depth
12,7  mm
Depth (inches)
0,5  inch
Height
16,4  mm
Height (inches)
0,646  inch
Height of lowest version
12,9  mm
Width
11,82  mm
Width (inches)
0,465  inch
Net weight
2,913  g

Temperatures

Continuous operating temp., max.
120  °C

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System specifications

Mounting onto the PCB
THT/THR solder connection  
Number of poles
3  
Number of solder pins per pole
2  
Pitch in inches (P)
0,15  "
Pitch in mm (P)
3,81  mm
Product family
OMNIMATE Signal - series LSF  
Protection degree
IP20  
Side termination, characteristic
closed side  
Solder eyelet hole diameter (D)
1,1  mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm  
Solder pin dimensions
0.35 x 0.8 mm  
Solder pin dimensions = d tolerance
  • Lower tolerance with prefix (reveals minimum):
    -0.1
  • Upper tolerance with prefix (reveals maximum):
    0
  • Tolerance, unit:
    mm
Solder pin length (l)
3,5  mm
Solder pin length tolerance
  • Lower tolerance with prefix (reveals minimum):
    -0.3
  • Upper tolerance with prefix (reveals maximum):
    +0.1
  • Tolerance, unit:
    mm
Solder pin length tolerance
+0.1 / -0.3 mm  
Soldering process
Reflow soldering  
Manual soldering  
Wave soldering  
Tolerance of solder pin position
± 0.1 mm  

Electrical properties

Volume resistance
1.60 mΩ  

Material data

Insulating material
LCP GF  
Colour
black  
Colour chart (similar)
RAL 9011  
Insulating material group
IIIa  
Comparative Tracking Index (CTI)
≥ 175  
Moisture Level (MSL)
1  
UL 94 flammability rating
V-0  
Contact material
Copper alloy  
Contact surface
tinned  
Layer structure of solder connection
4...6 µm Sn matt  
Storage temperature, min.
-40  °C
Storage temperature, max.
70  °C
Operating temperature, min.
-50  °C
Operating temperature, max.
120  °C

Packing

Packaging
Tube  
VPE length
554  mm
VPE width
22  mm
VPE height
17  mm

Type tests

Test: Durability of markings
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, pitch, durability
  • Evaluation:
    available
  • Test:
    approval marking UL
  • Evaluation:
    on packaging label
Test: Clampable cross section
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Pull-out test
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U1.5
    • Type of conductor and conductor cross-section:
      H07V-K1.5
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.  
Notes
  • Additional push button colours on request
  • Operating force of slider max. 40 N
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Crimping shape "A" for wire end ferrules with PZ 6/5 crimping tool recommended.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002643  
ETIM 7.0
EC002643  
ETIM 8.0
EC002643  
ETIM 9.0
EC002643  
ETIM 10.0
EC002643  
ECLASS 9.0
27-44-04-01  
ECLASS 9.1
27-44-04-01  
ECLASS 10.0
27-44-04-01  
ECLASS 11.0
27-46-01-01  
ECLASS 12.0
27-46-01-01  
ECLASS 13.0
27-46-01-01  
ECLASS 14.0
27-46-01-01  
ECLASS 15.0
27-46-01-01  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate No. (cURus)
E60693