Analogue Signal Conditioning

Analogue Signal Conditioning

When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur.
Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored

Analogue signal processing is required when automation processes have to constantly maintain or reach defined conditions. This is particularly significant for process automation applications. Standardised electrical signals are typically used for process engineering. Analogue standardised currents / voltage 0(4)...20 mA/ 0...10 V have established themselves as
physical measurement and control variables.

Weidmüller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing

The analogue signal processing products can be used universally in combination with other Weidmüller products and in combination among each other. Their electrical and mechanical design is such that they require only minimal wiring efforts.

Housing types and wire-connection methods matched to the respective application facilitate the universal use in process and industrial automation applications.

The product line includes the following functions:

  • Isolating transformers,  supply isolators and signal converters for DC standard signals
  • Temperature measuring transducers for resistance thermometers and thermocouples,
  • frequency converters,
  • potentiometer-measuring-transducers,
  • bridge measuring transducers (strain gauges)
  • trip amplifiers and modules for monitoring electrical and non-electrical process variables
  • AD/DA converters
  • displays
  • calibration devices

The products mentioned are available as pure signal converters / isolation transducers, 2-way/3-way isolators, supply isolators,  passive isolators or as trip amplifiers.

  • 1(current)
  • 2
  • 3
212 tuotetta löytyi
  • Tuotteen tunnus
    0687560000
    Malli
    SAK Series, End plate, 1.5 mm, beige, Direct mounting
    Tuotesivu
    VPE: 20 items
  • Tuotteen tunnus
    0546160000
    Malli
    Surge protection, Rectifier circuit
    Tuotesivu
    VPE: 10 items
  • Tuotteen tunnus
    0546260000
    Malli
    Surge protection, Rectifier circuit
    Tuotesivu
    VPE: 10 items
  • Tuotteen tunnus
    0126360000
    Malli
    EG-Series, Function component Circuit breaker, Screw connection
    Tuotesivu
    VPE: 10 items
  • Tuotteen tunnus
    0104060000
    Malli
    EG-Series, Function component CO contact, switching, Screw connection
    Tuotesivu
    VPE: 10 items
  • Tuotteen tunnus
    0329860000
    Malli
    Assembly modul, Number of signals: 5
    Tuotesivu
    VPE: 5 items
  • Tuotteen tunnus
    0114660000
    Malli
    EG-Series, Function component CO contact, sensing, Screw connection
    Tuotesivu
    VPE: 10 items
  • Tuotteen tunnus
    0104260000
    Malli
    EG-Series, Function component CO contact, off position in the middle, sensing on both sides, Screw connection
    Tuotesivu
    VPE: 10 items
  • Tuotteen tunnus
    0104360000
    Malli
    EG-Series, Function component CO contact, off position in the middle, sensing on one side, switching on one side, Screw connection
    Tuotesivu
    VPE: 10 items
  • Tuotteen tunnus
    0329761001
    Malli
    Assembly modul, Number of signals: 5
    Tuotesivu
    VPE: 5 items
  • Tuotteen tunnus
    1176040000
    Malli
    Signal converter/insulator, Output current loop powered, 1-channel, Input : 4-20 mA, Output : 4-20 mA
    Tuotesivu
    VPE: 1 items
  • Tuotteen tunnus
    1169261001
    Malli
    DA converter, Input : 8-bit pulse, Output : 4-20 mA
    Tuotesivu
    VPE: 1 items
  • Tuotteen tunnus
    1176080000
    Malli
    Signal converter/insulator, Input current loop feed, 2-channel, Input : 0(4)-20 mA, Output : 4-20 mA
    Tuotesivu
    VPE: 1 items
  • ACT20M-CI-2CO-S
    Orange Selection

    Tuotteen tunnus
    1175990000
    Malli
    Signal duplicator/isolator, Input : 0(4)-20 mA, Output : 2 x 0(4) - 20 mA
    Tuotesivu
    VPE: 1 items
  • Tuotteen tunnus
    1168561001
    Malli
    AD converter, Input : 4-20 mA, Output : 8-bit pulse
    Tuotesivu
    VPE: 1 items
  • ACT20M-AI-AO-S
    Orange Selection

    Tuotteen tunnus
    1176000000
    Malli
    Signal converter/insulator, Configurable, with sensor supply, Input : I / U, Output : I / U
    Tuotesivu
    VPE: 1 items
  • ACT20M-CI-CO-S
    Orange Selection

    Tuotteen tunnus
    1175980000
    Malli
    Signal converter/insulator, Signal converter/isolator, Input : 0(4)-20 mA, Output : 4-20 mA
    Tuotesivu
    VPE: 1 items
  • ACT20M-AI-AO-E-S
    Orange Selection

    Tuotteen tunnus
    1176010000
    Malli
    Signal converter/insulator, Configurable, without sensor supply, Input : I / U, Output : I / U
    Tuotesivu
    VPE: 1 items
  • Tuotteen tunnus
    1176050000
    Malli
    Signal converter/insulator, Output current loop powered, 2-channel, Input : 4-20 mA, Output : 4-20 mA
    Tuotesivu
    VPE: 1 items
  • ACT20M-AI-2AO-S
    Orange Selection

    Tuotteen tunnus
    1176020000
    Malli
    Signal duplicator/isolator, Configurable, with sensor supply, Input : I / U, Output : I / U
    Tuotesivu
    VPE: 1 items
    • 1(current)
    • 2
    • 3