DRMKIT 24VAC 2CO LD
Product image
Similar to illustration
DRMKIT 24VAC 2CO LD
Wiring diagram
DRMKIT 24VAC 2CO LD
Graph
DC load limit curve
Resistive load
DRMKIT 24VAC 2CO LD
Graph
Electrical service life
DRMKIT 24VAC 2CO LD
Graph
Derating curve
DRMKIT 24VAC 2CO LD
Graph
AC operational voltage range
DRMKIT 24VAC 2CO LD
Dimensional drawing
DRMKIT 24VAC 2CO LD
Miscellaneous
Type codes

DRMKIT 24VAC 2CO LD

D-SERIES DRM, Relay module, Number of contacts: 2, CO contact AgNi flash gold-plated, Rated control voltage: 24 V AC, Continuous current: 10 A, Screw connection, Test button available: No

Product ID 1542380000
Openen in configurator
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 13 Afzonderlijke onderdelen 3 Verwante producten 8
Dopuszczenia General ordering data Wymiary i masa Temperatures Environmental Product Compliance Styrsida Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Dopuszczenia

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRM, Relay module, Number of contacts: 2, CO contact AgNi flash gold-plated, Rated control voltage: 24 V AC, Continuous current: 10 A, Screw connection, Test button available: No 
Order No.
1542380000 
Type
DRMKIT 24VAC 2CO LD 
GTIN (EAN)
4050118347074 
Qty.
10 items

Wymiary i masa

Depth
66,8 mm
Depth (inches)
2,63 inch
Height
79,9 mm
Height (inches)
3,146 inch
Width
27,2 mm
Width (inches)
1,071 inch
Net weight
81,048 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…55 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Styrsida

Rated control voltage
24 V AC 
Rated current AC
62.4 mA (50 Hz) 
52.2 mA (60 Hz) 
Power rating
1.0...1.2VA (60HZ) 
Coil resistance
160 Ω ± 10 % 
Status indicator
red LED 

Load side

Rated switching voltage
250 V AC 
Continuous current
10 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
20 A / 50 ms 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Switch-on delay
<20 ms 
Switch-off delay
<20 ms 
Contact type
2 CO contact (AgNi flash gold-plated) 
Mechanical service life
20 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
Yes 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
C 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
Dielectric strength for control side - load side
1,8 kVeff / 1 min 
Dielectric strength of neighbouring contacts
1 kVeff / 1 min 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E312083 

Connection data

Wire connection method
Screw connection 
Stripping length, rated connection
7 mm
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,7 Nm
Clamping range, min.
0,5 mm²
2,5 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Průřez připojení vodičů, jemně stáčené, max.
2,5 mm²
Sezione di collegamento cavo, flessibile con terminali DIN 46228/4, min.
0,5 mm²
Przekrój przyłącza przewodu, cienki przewód wielodrutowy z tulejkami kablowymi DIN 46228/4, maks.
2,5 mm²
Ledardiameter, fintrådig med ändhylsa (DIN 46228/1), min
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0,5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01