PRO DM 10

PRO DM 10

Diode module, 24 V DC

Product ID 2486070000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 2 Verwante producten 6
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data EMC / shock / vibration Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Classifications Approvals

General ordering data

Version
Diode module, 24 V DC  
Order No.
2486070000  
Type
PRO DM 10  
GTIN (EAN)
4050118496772  
Qty.
1  items

Dimensions and weights

Depth
125  mm
Depth (inches)
4,921  inch
Height
125  mm
Height (inches)
4,921  inch
Width
32  mm
Width (inches)
1,26  inch
Net weight
501  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-40 °C...70 °C  
Humidity
5-95% relative humidity, Tu = 40°C, without condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
cc374e6c-371c-484b-a36d-6c65c5030ae7  

Input

Connection system
Screw connection  
DC input voltage range
0...60 V DC  
Input current
2 × 12 A (-40 °C ~ +45 °C)  
2 × 10 A (+45 °C ~ +60 °C)  
2 × 7.5 A (+70 °C)  
Input fuse (internal)
No  
Nominal power consumption
240  VA
Rated input voltage
24 V DC  

Output

Connection system
Screw connection  
Continuous output current @ UNominal
1 × 24 A (-40 °C ~ +45 °C)  
1 × 20 A (+45 °C ~ +60 °C)  
1 × 15 A (+70 °C)  
Output current, max.
20  A
Output power
466  W
Protection against inverse voltage
Yes  
Rated output voltage
VINPUT-typ. 0.7 V  
Residual ripple, breaking spikes
Dependent on the power supplies used  

General data

Degree of efficiency
> 97% @ 24 V Input voltage  
Derating
> 60°C / 75% load @ 70°C  
Housing version
Metal, corrosion resistant  
Humidity
5-95% relative humidity, Tu = 40°C, without condensation  
Mounting position, installation notice
Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.  
MTBF
  • According to Standard:
    SN 29500
  • Operating time (hours), min.:
    44.022.000 h
  • Ambient temperature:
    25 °C
  • Input voltage:
    24 V
  • Output power:
    240 W
  • Duty cycle:
    100 %
  • According to Standard:
    SN 29500
  • Operating time (hours), min.:
    3.854.000 h
  • Ambient temperature:
    40 °C
  • Input voltage:
    24 V
  • Output power:
    240 W
  • Duty cycle:
    100 %
Protection degree
IP20  
Short-circuit protection
No  
Surge voltage category
III  

EMC / shock / vibration

Interference immunity test acc. to
EN 55022  
EN 55024  
EN 61000-3-2,-3  
EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)  
Shock resistance IEC 60068-2-27
30 g in all directions  
Vibration resistance IEC 60068-2-6
2.3 g (on DIN rail)  

Insulation coordination

Insulation voltage input / earth
0,5  kV
Insulation voltage output / earth
0,5  kV
Pollution severity
2  
Protection class
III, with no ground connection, for SELV  
Surge voltage category
III  

Electrical safety (applied standards)

Electrical machine equipment
Acc. to EN60204  
For use with electronic equipment
Acc. to EN50178 / VDE0160  
Protective separation / protection against electrical shock
VDE0100-410 / acc. to DIN57100-410  

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
10  
Conductor cross-section, AWG/kcmil , min.
26  
Conductor cross-section, flexible , min.
0,22  mm²
Conductor cross-section, rigid , max.
6  mm²
Conductor cross-section, rigid , min.
0,18  mm²
Connection system
Screw connection  
Number of terminals
4 (1+, 2+, 1-, 2-)  
Screwdriver blade
0.8 x 4.0  
PZ 1  
Tightening torque, max.
0,6  Nm
Tightening torque, min.
0,5  Nm
Wire connection cross section, flexible (input), max.
4  mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.
10  
Conductor cross-section, AWG/kcmil , min.
26  
Conductor cross-section, flexible , max.
6  mm²
Conductor cross-section, flexible , min.
0,22  mm²
Conductor cross-section, rigid , max.
6  mm²
Conductor cross-section, rigid , min.
0,18  mm²
Connection system
Screw connection  
Number of terminals
4 (++ / --)  
Screwdriver blade
0.8 x 4.0  
PZ 1  
Tightening torque, max.
0,6  Nm
Tightening torque, min.
0,5  Nm

Classifications

ETIM 6.0
EC002540  
ETIM 7.0
EC002540  
ETIM 8.0
EC002540  
ETIM 9.0
EC002540  
ETIM 10.0
EC002540  
ECLASS 9.0
27-04-07-01  
ECLASS 9.1
27-04-07-01  
ECLASS 10.0
27-04-07-01  
ECLASS 11.0
27-04-07-90  
ECLASS 12.0
27-04-07-90  
ECLASS 13.0
27-04-07-90  
ECLASS 14.0
27-04-07-90  
ECLASS 15.0
27-04-07-90  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319258/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E258476