DRIKIT 115VAC 1CO LD
Product image
Similar to illustration
DRIKIT 115VAC 1CO LD
Wiring diagram
DRIKIT 115VAC 1CO LD
Graph
DC load limit curve
Resistive load
DRIKIT 115VAC 1CO LD
Graph
Electrical service life
DRIKIT 115VAC 1CO LD
Graph
AC operational voltage range
DRIKIT 115VAC 1CO LD
Dimensional drawing
DRIKIT 115VAC 1CO LD
Miscellaneous
Type codes

DRIKIT 115VAC 1CO LD

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 10 A, Screw connection, Test button available: No

Item No. 2476720000
Download data sheet Engineering Support Product Downloads
Accessories 11 Individual parts 3 Related products 14
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 10 A, Screw connection, Test button available: No  
Order No.
2476720000  
Type
DRIKIT 115VAC 1CO LD  
GTIN (EAN)
4050118496949  
Qty.
10  items

Dimensions and weights

Depth
67.7  mm
Depth (inches)
2.665  inch
Height
80.2  mm
Height (inches)
3.157  inch
Width
15.8  mm
Width (inches)
0.622  inch
Net weight
58.2  g

Temperatures

Storage temperature
-40 °C...85 °C  
Ambient temperature
-40 °C…55 °C  
Humidity
35...85 % rel. humidity, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7cI  
REACH SVHC
No SVHC above 0.1 wt%  

Control side

Rated control voltage
115 V AC  
Rated current AC
9.3 mA  
Power rating
1.1 VA  
Coil resistance
6200 Ω ± 10 %  
Status indicator
red LED  

Load side

Rated switching voltage
250 V AC  
Continuous current
10 A  
Max. switching frequency at rated load
0.1  Hz
Max. switching voltage, AC
250  V
Max. switching voltage, DC
250  V
Min. switching power
10 mA @ 24 V  
10 mA @ 12 V  
100 mA @ 5 V  
AC switching capacity (resistive), max.
2500 VA  
DC switching capacity (resistive), max.
240 W @ 24 V  
Switch-on delay
≤ 15 ms  
Switch-off delay
≤ 10 ms  
Contact type
1 CO contact (AgSnO)  
Mechanical service life
10 x 106 switching cycles  

General data

Mounting rail
TS 35  
Test button available
No  
Mechanical switch position indicator
No  
Colour
black  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
250  V
Pollution severity
2  
Surge voltage category
III  
Insulating material group
IIIb  
Clearance and creepage distances for control side - load side
≥ 3 mm  
Dielectric strength for control side - load side
4 kVeff / 1 Min.  
Dielectric strength of open contact
1 kVeff / 1 min  
Impulse withstand voltage
4.8 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Certificate no. (cURus) relay
E312083  
Certificate no. (cURus) base
E355547  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
8  mm
Tightening torque, min.
0.5  Nm
Tightening torque, max.
0.8  Nm
Clamping range, rated connection
1.5  mm²
Clamping range, min.
0.25  mm²
Clamping range, max.
4  mm²
Wire cross-section, solid, min.
0.25  mm²
Wire cross-section, solid, max.
4  mm²
Wire connection cross section, finely stranded, min.
0.25  mm²
Wire connection cross section, finely stranded, max.
4  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.25  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.25  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4  mm²
Blade size
size PH1  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01