DURA MAX DC UPS 24V 5A

DURA MAX DC UPS 24V 5A

UPS control unit, 24 V

Produkt ID 2934940000
Download datablad Engineering-support Produktdownloads
Anvendte produkter 6
Approvals General ordering data Dimensions and weights Temperatures Battery module Integrated battery charger Operating interfaces and control inputs Input Output General data EMC / shock / vibration Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Connection data (signal) Signalling Classifications

Approvals

ROHS
Conform 

General ordering data

Version
UPS control unit, 24 V 
Order No.
2934940000 
Tipo
DURA MAX DC UPS 24V 5A 
GTIN (EAN)
4099986684089 
Qty.
1 Styk

Dimensions and weights

Depth
125 mm
Depth (inches)
4,921 inch
Height
130 mm
Height (inches)
5,118 inch
Width
30 mm
Width (inches)
1,181 inch
Net weight
481 g

Temperatures

Storage temperature
-40 °C...85 °C 
Üzemi hőmérséklet
-25 °C...70 °C 
Humidity
5...95 %, no condensation 

Battery module

Nominal voltage
24 V
Parallel connection option
yes, max. 2 

Integrated battery charger

Battery availability test
every minute 
Charging feature
IU characteristic curve 
Laddningsspänning (temperaturkompenserad)
27, 48 V @ 20°C 
Temperature coefficient
- 48 mV / °C 

Operating interfaces and control inputs

Remote disconnection (Interlock)
Yes 
Selector switch battery
1.2 Ah 
3.4 Ah 
7 Ah 
12 Ah 
Selector switch buffer times
0.5 min 
1 min 
3 min 
10 min 
20 min 
30 min 
Service 
Temperature probe
NTC 100 kΩ 

Input

DC current consumption
<0.2 A @ no load 
DC input voltage range
18…30 V DC 
Input current
<5.2 A 
Input fuse (internal)
Yes 
Inrush Current Limitation
<28 A 
Rated input voltage
24 V DC 
Wire connection method
PUSH IN 

Output

Nabíjecí proud baterie
0.5 A (3.4 AH) 
Output current, max.
5 A
Output power
120 W
Output voltage type
DC 
Overload protection
Yes 
Parallel connection option
yes, max. 2 
Protection against inverse voltage
Yes 
Rated output voltage
24 V DC 
Temperature coefficient
- 48 mV / °C 
Temperature probe
NTC 100 kΩ 
Wire connection method
PUSH IN 

General data

Buffer times
Depending on the connected battery 
Clip-in foot
metal 
Degree of efficiency
> 98% 
Housing version
Metal, corrosion resistant 
Humidity
5...95 %, no condensation 
Mounting position, installation notice
On TS 35 mounting rail, 50 mm clearance above and below for free air supply. 
MTBF
  • Operating time (hours), min.:
    500 000 h
  • Ambient temperature:
    25 °C
  • Input voltage:
    24 V
  • Duty cycle:
    100 %
Power loss
<10 W 
Protection against reverse voltages from the load
≤ 35 V DC 
Protection degree
IP20 
Short-circuit protection
Yes 
Storage medium
3.4 Ah 
12 Ah 
Selectable with rotary switch 
1.2 Ah 
7 Ah 
Surge voltage category
III 
Weight
500 g

EMC / shock / vibration

Noise emission in accordance with EN55032
Class B 
Prueba de resistencia a interferencias según
EN 61000-4-2 (ESD)/EN 61000-4-3 and EN 61000-4-8 (fields)/EN 61000-4-4 (burst)/EN 61000-4-5 (surge)/EN 61000-4-6 (conducted)/EN 61000-4-11 (dips) 
Shock resistance IEC 60068-2-27
30 g in all directions 
Vibration resistance IEC 60068-2-6
2.3 g 
4 g 

Insulation coordination

Insulation voltage
1 kV DC 
Pollution severity
2 
Protection class
III 
Surge voltage category
III 

Electrical safety (applied standards)

Attrezzature elettriche delle macchine
Acc. to EN60204 
Elektronikus berendezéssel történő használatra
Acc. to EN50178 
Safety transformers for switch-mode power supplies
According to EN 61558-2-16 

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
14 AWG
Conductor cross-section, AWG/kcmil , min.
18 AWG
Conductor cross-section, flexible , min.
1 mm²
Conductor cross-section, rigid , max.
2,5 mm²
Conductor cross-section, rigid , min.
1 mm²
Reverse polarity protection
Yes 
Wire connection cross section, flexible (input), max.
2,5 mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.
14 AWG
Conductor cross-section, AWG/kcmil , min.
25 AWG
Conductor cross-section, flexible , max.
2,5 mm²
Conductor cross-section, flexible , min.
1 mm²
Conductor cross-section, rigid , max.
2,5 mm²
Conductor cross-section, rigid , min.
1 mm²
Защита от переполюсовки
Yes 

Connection data (signal)

Wire connection cross-section, flexible (signal), max.
1,5 mm²
Wire connection cross-section, flexible (signal), min.
0,2 mm²
Wire connection method
PUSH IN 
Wire cross-section, AWG/kcmil , max.
16 
Wire cross-section, AWG/kcmil , min.
25 mm²
Wire cross-section, solid , max.
1,5 mm²
Wire cross-section, solid , min.
0,2 mm²

Signalling

Floating contact
Yes 
Status indicator
LED red: Battery fault 
LED yellow: Alarm/ Temperature Sensor fault 
LED green: Normal mode 
LED green flashing: Buffer mode 
LED off: no error 
Status relay (max. load)
Output voltage OK (30 V DC / 1 A) 

Classifications

ETIM 8.0
EC002850 
ETIM 9.0
EC002850 
ETIM 10.0
EC002850 
ECLASS 14.0
27-04-06-92 
ECLASS 15.0
27-04-06-92