PRO BAS 30W 5V 6A
PRO BAS 30W 5V 6A
Derating curve
Temperature Derating
PRO BAS 30W 5V 6A
Derating curve
AC-Input Derating
PRO BAS 30W 5V 6A
Derating curve
DC-Input Derating

PRO BAS 30W 5V 6A

Power supply, switch-mode power supply unit, 5 V

Produkt ID 2838400000
Åbn i konfiguratoren
Download datablad Engineering-support Produktdownloads
Anvendte produkter 12
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data EMC / shock / vibration Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Signalling Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/bd70fd7c-25a7-46d9-a404-2588bf18d09f/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Power supply, switch-mode power supply unit, 5 V 
Order No.
2838400000 
Type
PRO BAS 30W 5V 6A 
GTIN (EAN)
4064675444091 
Qty.
1 Styk

Dimensions and weights

Depth
85 mm
Depth (inches)
3,346 inch
Height
90 mm
Height (inches)
3,543 inch
Width
36 mm
Width (inches)
1,417 inch
Net weight
245 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-25 °C...70 °C 
Start-up
≥ -40 °C 
Humidity
5…95 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c, 7a, 7cI 
REACH SVHC
Lead 7439-92-1 
Lead monoxide 1317-36-8 
SCIP
d62541f7-8058-4336-b693-7303c8b40800 

Input

AC input voltage range
85...264 V AC (derating at 100 V AC) 
Connection system
Screw connection 
Current consumption in relation to the input voltage
  • Voltage type:
    AC
  • Input voltage:
    230 V
  • Input current:
    0,34 A
  • Voltage type:
    AC
  • Input voltage:
    115 V
  • Input current:
    0,56 A
  • Voltage type:
    DC
  • Input voltage:
    120 V
  • Input current:
    0,28 A
DC input voltage range
110...370 V DC (derating at <120 V DC) 
Frequency range AC
45…65 Hz 
Input fuse (internal)
Yes 
Inrush current
40 A @ 230 V AC, 25 °C 
Nominal power consumption
34,48 VA
Rated input voltage
110...240 V AC / 120...340 V DC 
Recommended back-up fuse
2 A / DI, safety fuse
6 A, Char. B, circuit breaker
2...4 A, Char. C circuit breaker 
Wire connection method
Screw connection 

Output

Connection system
Screw connection 
Corrente d'uscita nominale per Unom.
6 A @ 55 °C 
Kimenő áram, max.
6 A
Kontinuerlig utgångsström @ UNominell
6 A @ 55 °C 
3.75 A @ 70 °C 
Mains failure bridge-over time
  • Mains failure bridge-over time, min.:
    20 ms
  • Input voltage type:
    AC
  • Input voltage:
    120 V
  • Output current:
    6 A
  • Output voltage:
    5 V
  • Mains failure bridge-over time, min.:
    80 ms
  • Input voltage type:
    AC
  • Input voltage:
    230 V
  • Output current:
    6 A
  • Output voltage:
    5 V
Output power
30 W
Output voltage, min.
3 V
Overload protection
Yes 
Parallel connection option
yes, max. 3 
Rated output voltage
5 V DC 
Residual ripple, breaking spikes
≤ 50 mVpp @ full load 
Tecnica di collegamento cavi
Screw connection 
Tensión de salida, max.
8 V
Защита от обратного напряжения
Yes 
용량성 부하
5.5mF 
출력 전압, 주
adjustable via potentiometer 

General data

AC failure bridging time @ Inom
> 80 ms @ 230 V AC / > 20 ms @ 115 V AC 
Building height
90 mm
Building Width
36 mm
Degree of efficiency
87% @ 230 V AC 
Housing version
Plastic, protective insulation 
Humidity
5…95 % rel. humidity, no condensation 
Mounting position, installation notice
Horizontal on TS35 mounting rail. 50 mm of clearance at top &amp; bottom for air circ. Can mount side by side with no space in between. 
Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring subassemblies. 
50 mm clearance at top and bottom for free air circulation, mountable side by side without clearance 
On TS 35 mounting rail, 50 mm clearance above and below for free air supply. 
MTBF
  • According to Standard:
    SN 29500
  • Operating time (hours), min.:
    1.200.000 h
  • Ambient temperature:
    40 °C
  • Input voltage:
    230 V
  • Output power:
    30 W
  • Duty cycle:
    100 %
Power factor (approx.)
0.45 @ 120 V AC 
0.45 @ 230 V AC 
Power loss, idling
0,5 W
Power loss, nominal load
3,9 W
Protection against over-heating
Yes 
Protection degree
IP20 
Short-circuit protection
Yes 
Status indication
Green LED 

EMC / shock / vibration

Interference immunity test acc. to
EN 61000-4-2 (ESD) 
EN 61000-4-3 (RS) 
IEC 61000-6-4 
EN 61000-4-4 (burst) 
EN 61000-4-5 (surge) 
EN 61000-4-6 (conducted) 
EN61000-4-8 (Fields) 
EN 61000-4-11 (Dips) 
IEC 61000-6-1 
IEC 61000-6-2 
IEC 61000-6-3 
Noise emission in accordance with EN55032
Class B 
Shock resistance IEC 60068-2-27
30 g in all directions 
Vibration resistance IEC 60068-2-6
0.7 g according to EN 50178 

Insulation coordination

Insulation voltage, input/output
3,5 kV
Pollution severity
2 
Protection class
II 

Electrical safety (applied standards)

Safety extra-low voltage
SELV acc. to IEC 61010-1 
PELV acc. to IEC 61010-2-201 
Safety transformers for switch-mode power supplies
According to EN 61558-2-16 

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
12 AWG
Conductor cross-section, AWG/kcmil , min.
26 AWG
Conductor cross-section, flexible , min.
0,5 mm²
Conductor cross-section, rigid , max.
6 mm²
Conductor cross-section, rigid , min.
0,5 mm²
Connection system
Screw connection 
Number of terminals
2 (L,N) 
Screwdriver blade
0.6 x 3.5 
Tightening torque, max.
0,6 Nm
Tightening torque, min.
0,5 Nm
Wire connection cross section, flexible (input), max.
6 mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.
12 AWG
Conductor cross-section, AWG/kcmil , min.
26 AWG
Conductor cross-section, flexible , max.
6 mm²
Conductor cross-section, flexible , min.
0,5 mm²
Conductor cross-section, rigid , max.
6 mm²
Conductor cross-section, rigid , min.
0,5 mm²
Connection system
Screw connection 
Number of terminals
4 (++ / --) 
Screwdriver blade
0.6 x 3.5 
Tightening torque, max.
0,6 Nm
Tightening torque, min.
0,5 Nm

Signalling

Floating contact
No 
LED green
Operating voltage OK 
Status indication
Green LED 
Trigger voltage, LED
Uout > 0.9 x Unominal min 

Classifications

ETIM 8.0
EC002540 
ETIM 9.0
EC002540 
ETIM 10.0
EC002540 
ECLASS 14.0
27-04-07-01 
ECLASS 15.0
27-04-07-01