SLS 5.08/02/180F SN OR BX
Produktillustration
SLS 5.08/02/180F SN OR BX
Produktillustration
SLS 5.08/02/180F SN OR BX
Dimensional drawing
SLS 5.08/02/180F SN OR BX
Graph
SLS 5.08/02/180F SN OR BX
Graph
SLS 5.08/02/180F SN OR BX
Graph

SLS 5.08/02/180F SN OR BX

PCB plug-in connector, male plug, 5.08 mm, Number of poles: 2, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box

Product ID 1846360000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 4 Is contradeel van 16 Verwante producten 16
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Omologazioni
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319262/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
N° certificato (UR)
E60693 

General ordering data

Versione
PCB plug-in connector, male plug, 5.08 mm, Number of poles: 2, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box 
N. d’ordine
1846360000 
Tipo
SLS 5.08/02/180F SN OR BX 
GTIN (EAN)
4032248362066 
CPZ
90 items
Product data
IEC: 400 V / 21.5 A / 0.2 - 2.5 mm²
UL: 300 V / 14 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

Profondità
22,2 mm
Depth (inches)
0,874 inch
Posizione verticale
15,3 mm
Height (inches)
0,602 inch
Peso netto
4,439 g

Environmental Product Compliance

Stato conformità RoHS
Compliant with exemption 
Esenzione RoHS (se applicabile/nota)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
5f72207e-da7b-4e67-98e6-158600cbc2d0 

System Parameters

Famiglia prodotti
OMNIMATE Signal - series BL/SL 5.08 
Tipo di collegamento
Field connection 
Tecnica di collegamento cavi
Clamping yoke connection 
피치(mm)(P)
5,08 mm
Passo in pollici (P)
0,2 "
Direzione d'uscita del conduttore
180° 
Number of poles
2 
L1 in mm
5,08 mm
L1 in pollici
0,2 "
quantità di file
1 
핀 시리즈 수량
1 
Protezione da contatto accidentale DIN VDE 57 106
finger-safe plugged/ back-of-hand-safe unplugged 
zabezpieczenie przed dotykiem wg DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Protection degree
IP20 
when fully mounted 
Rezystancja skrośna
≤5 mΩ 
Codificabile
Yes 
Lunghezza di spellatura
7 mm
Clamping screw
M 2.5 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264-A 
Plugging cycles
25 
Plugging force/pole, max.
4 N
Pulling force/pole, max.
3 N
Tightening torque
  • Torque type:
    Wire connection
  • Usage information:
    • Tightening torque:
      • min.:
        0,4 Nm
      • max.:
        0,5 Nm

Material data

Materiale isolante
PBT 
Colori
orange 
Tabella dei colori (simile)
RAL 2000 
Gruppo materiali isolanti
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Materiale dei contatti
Cu-alloy 
Superficie dei contatti
tinned 
Struttura a strati del connettore maschio
4...8 µm Sn hot-dip tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Campo di sezioni, min.
0,13 mm²
3,31 mm²
Sezione di collegamento cavo AWG, min.
AWG 26 
Sezione di collegamento cavo AWG, max.
AWG 12 
rigido, min. H05(07) V-U
0,2 mm²
rigido, max. H05(07) V-U
2,5 mm²
Stranded, min. H07V-R
0,2 mm²
multifilare, max. H07V-R
2,5 mm²
Flessibile, min. H05(07) V-K
0,2 mm²
Flessibile, max. H05(07) V-K
2,5 mm²
con terminale AEH con collare DIN 46 228/4, min.
0,2 mm²
con terminale AEH con collare DIN 46 228/4, max.
2,5 mm²
con terminale, DIN 46228 pt 1, min.
0,2 mm²
con terminale a norma DIN 46 228/1, max.
2,5 mm²
Calibro a tampone secondo EN 60999 a x b; ø
2.8 mm x 2.0 mm; 2.4 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0373000000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
Testo di riferimento
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Corrente di dimensionamento, numero minimo di poli (Tu=20 °C)
21,5 A
Corrente di dimensionamento, numero massimo di poli (Tu=20 °C)
16 A
Corrente di dimensionamento, numero minimo di poli (Tu=40 °C)
18 A
Corrente di dimensionamento, numero massimo di poli (Tu = 40°C)
14 A
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
400 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
320 V
Tensione nominale con classe di sovratensione/grado di lordura III/3
250 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
4 kV
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
4 kV
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
4 kV
Portata transitoria
3 x 1s with 120 A 

Rated data acc. to CSA

Tensione nominale (Gruppo B / CSA)
300 V
Tensione nominale (Gruppo D / CSA)
300 V
Corrente nominale (Gruppo B / CSA)
15 A
Corrente nominale (Gruppo D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26 
Section de raccordement de câble AWG, max.
AWG 12 

Rated data acc. to UL 1059

Istituto (UR)
UR 
인증 번호(UR)
E60693 
Tensione nominale (Gruppo B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Corrente nominale (Gruppo B / UL 1059)
14 A
Prąd znamionowy (grupa użytkowa D / UL 1059)
10 A
przekrój przyłącza przewodu AWG, min.
AWG 26 
Sezione di collegamento cavo AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Упаковка
Box 
Lunghezza VPE
349 mm
Larghezza VPE
139 mm
Altezza VPE
31 mm

Type tests

Test: Durabilità delle siglature
  • Standard:
    VDE 0627 Tab. 7 item 3/6.86
  • Test:
    durability
  • Evaluation:
    passed
Test: Sezione bloccabile
  • Standard:
    VDE 0609 part 1 06.83, EN 60947-1 03.91
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
    • Type of conductor and conductor cross-section:
      H05V-U2.5
    • Type of conductor and conductor cross-section:
      H05V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 28
    • Type of conductor and conductor cross-section:
      AWG 14
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    EN 60947-1/1991 section 8.2.4.3
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    EN 60947-1/1991 section 8.2.4.4
  • Requirement:
    ≥5 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/7
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02