DRIKIT 24VAC 1CO LD/PB
Product image
Similar to illustration
DRIKIT 24VAC 1CO LD/PB
Wiring diagram
DRIKIT 24VAC 1CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKIT 24VAC 1CO LD/PB
Graph
Electrical service life
DRIKIT 24VAC 1CO LD/PB
Graph
AC operational voltage range
DRIKIT 24VAC 1CO LD/PB
Dimensional drawing
DRIKIT 24VAC 1CO LD/PB
Miscellaneous
Type codes

DRIKIT 24VAC 1CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V AC, Continuous current: 10 A, Screw connection, Test button available: Yes

N.º de artículo 2476780000
Abrir en el configurador
Descargar hoja de datos Wsparcie inżynieryjne Pobieranie produktów
Příslušenství 10 Jednotlivé díly 3 Příbuzné výrobky 14
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V AC, Continuous current: 10 A, Screw connection, Test button available: Yes 
Order No.
2476780000 
Type
DRIKIT 24VAC 1CO LD/PB 
GTIN (EAN)
4050118497007 
Qty.
10 items

Dimensions and weights

Depth
68 mm
Depth (inches)
2,677 inch
Height
80,2 mm
Height (inches)
3,157 inch
Width
15,8 mm
폭 (인치)
0,622 inch
Net weight
59,4 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

정격 제어 전압
24 V AC 
Rated current AC
50 mA 
Potenza nominale
1,2 VA 
Coil resistance
240 Ω ± 10 % 
Status indicator
red LED 

Load side

정격 스위칭 전압
250 V AC 
Continuous current
10 A 
정격 부하 시 최대 스위칭 주파수
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Группа изоляционного материала
IIIb 
제어 측면 - 부하 측면에 대한 기중 거리 및 연면 거리
≥ 3 mm 
Dielectric strength for control side - load side
4 kVeff / 1 Min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Connection data

Wire connection method
Screw connection 
Stripping length, rated connection
8 mm
Tightening torque, min.
0,5 Nm
Åtdragningsmoment, max.
0,8 Nm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,25 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0,25 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01