SLS 5.08/06/180 SN OR BX
Product image
SLS 5.08/06/180 SN OR BX
Product image
SLS 5.08/06/180 SN OR BX
Dimensional drawing
SLS 5.08/06/180 SN OR BX
Graph
SLS 5.08/06/180 SN OR BX
Graph
SLS 5.08/06/180 SN OR BX
Graph

SLS 5.08/06/180 SN OR BX

PCB plug-in connector, male plug, 5.08 mm, Number of poles: 6, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box

Produkt ID 1627130000
Download datablad Engineering-support Produktdownloads
Tilbehør 4 Er et modstykke til 22 Anvendte produkter 18
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Dopuszczenia
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Nr certyfikatu (UR)
E60693 

General ordering data

Version
PCB plug-in connector, male plug, 5.08 mm, Number of poles: 6, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box 
Nr zam.
1627130000 
Type
SLS 5.08/06/180 SN OR BX 
GTIN (EAN)
4008190199647 
Ilość
60 Styk
Product data
IEC: 400 V / 21.5 A / 0.2 - 2.5 mm²
UL: 300 V / 14 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
22,2 mm
Głębokość (cale)
0,874 inch
Wysokość
15,3 mm
Height (inches)
0,602 inch
Width
30,48 mm
Width (inches)
1,2 inch
Masa netto
9,8 g

Environmental Product Compliance

Status zgodności z dyrektywą RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System Parameters

제품군
OMNIMATE Signal - series BL/SL 5.08 
결선 유형
Field connection 
와이어 결선 방식
Clamping yoke connection 
피치(mm)(P)
5,08 mm
Pitch in inches (P)
0,2 "
Conductor outlet direction
180° 
Liczba biegunów
6 
L1 in mm
25,4 mm
L1(인치)
1 "
Number of rows
1 
핀 시리즈 수량
1 
zabezpieczenie przed dotykiem wg DIN VDE 57 106
finger-safe plugged/ back-of-hand-safe unplugged 
DIN VDE 0470에 따른 터치 안전 보호
IP20 plugged/ IP10 unplugged 
Protection degree
IP20 
when fully mounted 
볼륨 저항
≤5 mΩ 
코딩 가능
Yes 
Długość odizolowania
7 mm
Clamping screw
M 2.5 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264-A 
Plugging cycles
25 
Plugging force/pole, max.
4 N
Pulling force/pole, max.
3 N
Tightening torque
  • Torque type:
    Wire connection
  • Usage information:
    • Tightening torque:
      • min.:
        0,4 Nm
      • max.:
        0,5 Nm

Material data

Materiał izolacyjny
PBT 
Barwny
orange 
Tabela kolorów (podobny)
RAL 2000 
grupa materiałów izolacyjnych
IIIa 
Porównywalny wskaźnik śledzenia (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Materiał styków
Cu-alloy 
Powierzchnia styku
tinned 
Struktura warstwowa wtyku
4...8 µm Sn hot-dip tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Zakres zaciskania, min.
0,13 mm²
Zakres zaciskania, maks.
3,31 mm²
przekrój przyłącza przewodu AWG, min.
AWG 26 
przekrój przyłączeniowy przewodu AWG, maks.
AWG 12 
jednodrutowe, min. H05(07) V-U
0,2 mm²
jednodrutowe, maks. H05(07) V-U
2,5 mm²
Wielodrutowe, min. H07V-R
0,2 mm²
wielodrutowe, maks. H07V-R
2,5 mm²
cienkodrutowe, min. H05(07) V-K
0,2 mm²
cienkodrutowe, maks. H05(07) V-K
2,5 mm²
z AEH z kołnierzem DIN 46 228/4, min.
0,2 mm²
z AEH z kołnierzem DIN 46 228/4, maks.
2,5 mm²
z tulejką zaciskową, DIN 46228 pt 1, min.
0,2 mm²
z końcówką kablową wg DIN 46 228/1, maks.
2,5 mm²
Sprawdzian trzpieniowy EN 60999 a x b; ø
2.8 mm x 2.0 mm; 2.4 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0373000000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
Tekst referencyjny
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Prąd znamionowy, min. liczba biegunów (Tu=20°C)
21,5 A
Prąd znamionowy, maks. liczba biegunów (Tu=20°C)
16 A
Prąd znamionowy, min. liczba biegunów (Tu=40°C)
18 A
Prąd znamionowy, maks. liczba biegunów (Tu=40°C)
14 A
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia II/2
400 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/2
320 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/3
250 V
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia II/2
4 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/2
4 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/3
4 kV
odporność na zwarcia
3 x 1s with 120 A 

Rated data acc. to CSA

협회(CSA)
CSA 
인증 번호(CSA)
200039-1121690 
정격 전압(사용 그룹 B / CSA)
300 V
정격 전압(사용 그룹 D / CSA)
300 V
Rated current (Use group B / CSA)
15 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

협회(UR)
UR 
인증 번호(UR)
E60693 
정격 전압(사용 그룹 B / UL 1059)
300 V
정격 전압(사용 그룹 D / UL 1059)
300 V
Prąd znamionowy (grupa użytkowa B / UL 1059)
14 A
정격 전류(사용 그룹 D / UL 1059)
10 A
와이어 단면적, AWG, 최소
AWG 26 
와이어 단면적, AWG, 최대
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

패키징
Box 
VPE 길이
348 mm
VPE width
135 mm
VPE 높이
34 mm

Type tests

테스트: 표시 내구성
  • Standard:
    VDE 0627 Tab. 7 item 3/6.86
  • Test:
    durability
  • Evaluation:
    passed
테스트: 클램프 사용 가능한 단면
  • Standard:
    VDE 0609 part 1 06.83, EN 60947-1 03.91
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
    • Type of conductor and conductor cross-section:
      H05V-U2.5
    • Type of conductor and conductor cross-section:
      H05V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 28
    • Type of conductor and conductor cross-section:
      AWG 14
  • Evaluation:
    passed
컨덕터의 손상 및 의도치 않은 느슨해짐 테스트
  • Standard:
    EN 60947-1/1991 section 8.2.4.3
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
  • Evaluation:
    passed
Pull-out test
  • Standard:
    EN 60947-1/1991 section 8.2.4.4
  • Requirement:
    ≥5 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/7
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed

Important note

Zgodność IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Uwagi
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02